Total
455 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-16009 | 1 Cisco | 2 Ios, Ios Xe | 2020-09-28 | 7.6 HIGH | 8.8 HIGH |
| A vulnerability in the web UI of Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. The vulnerability is due to insufficient CSRF protections for the web UI on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the targeted user. If the user has administrative privileges, the attacker could alter the configuration, execute commands, or reload an affected device. | |||||
| CVE-2018-0172 | 2 Cisco, Rockwellautomation | 8 Ios, Ios Xe, Allen-bradley Armorstratix 5700 and 5 more | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730. | |||||
| CVE-2018-0155 | 2 Cisco, Rockwellautomation | 13 Catalyst 4500-x Series Switches \(k10\), Catalyst 4500 Supervisor Engine 6-e \(k5\), Catalyst 4500 Supervisor Engine 6l-e \(k10\) and 10 more | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729. | |||||
| CVE-2017-3864 | 1 Cisco | 2 Ios, Ios Xe | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892. | |||||
| CVE-2018-0156 | 1 Cisco | 149 Catalyst 2960-plus 24lc-l, Catalyst 2960-plus 24lc-s, Catalyst 2960-plus 24pc-l and 146 more | 2020-09-02 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted packet to an affected device on TCP port 4786. Only Smart Install client switches are affected. Cisco devices that are configured as a Smart Install director are not affected by this vulnerability. Cisco Bug IDs: CSCvd40673. | |||||
| CVE-2018-15368 | 1 Cisco | 1 Ios Xe | 2020-08-28 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent modifications to the underlying Linux filesystem on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. | |||||
| CVE-2018-0481 | 1 Cisco | 1 Ios Xe | 2020-08-28 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. | |||||
| CVE-2018-0477 | 1 Cisco | 1 Ios Xe | 2020-08-28 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. | |||||
| CVE-2018-0282 | 1 Cisco | 149 Catalyst 2960-plus 24lc-l, Catalyst 2960-plus 24lc-s, Catalyst 2960-plus 24pc-l and 146 more | 2020-08-28 | 7.1 HIGH | 6.8 MEDIUM |
| A vulnerability in the TCP socket code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a state condition between the socket state and the transmission control block (TCB) state. While this vulnerability potentially affects all TCP applications, the only affected application observed so far is the HTTP server. An attacker could exploit this vulnerability by sending specific HTTP requests at a sustained rate to a reachable IP address of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition on an affected device. | |||||
| CVE-2017-3881 | 1 Cisco | 323 Catalyst 2350-48td-s, Catalyst 2350-48td-sd, Catalyst 2360-48td-s and 320 more | 2020-08-07 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893. | |||||
| CVE-2017-6743 | 1 Cisco | 2 Ios, Ios Xe | 2020-08-03 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60376, CSCve78027. | |||||
| CVE-2012-0382 | 1 Cisco | 2 Ios, Ios Xe | 2020-07-30 | 7.8 HIGH | 7.5 HIGH |
| The Multicast Source Discovery Protocol (MSDP) implementation in Cisco IOS 12.0, 12.2 through 12.4, and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.1S and 3.1.xSG and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) via encapsulated IGMP data in an MSDP packet, aka Bug ID CSCtr28857. | |||||
| CVE-2012-0381 | 1 Cisco | 2 Ios, Ios Xe | 2020-07-29 | 7.8 HIGH | 7.5 HIGH |
| The IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) by sending IKE UDP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCts38429. | |||||
| CVE-2017-3857 | 1 Cisco | 2 Ios, Ios Xe | 2020-07-27 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. | |||||
| CVE-2020-3220 | 1 Cisco | 1 Ios Xe | 2020-06-10 | 7.1 HIGH | 6.8 MEDIUM |
| A vulnerability in the hardware crypto driver of Cisco IOS XE Software for Cisco 4300 Series Integrated Services Routers and Cisco Catalyst 9800-L Wireless Controllers could allow an unauthenticated, remote attacker to disconnect legitimate IPsec VPN sessions to an affected device. The vulnerability is due to insufficient verification of authenticity of received Encapsulating Security Payload (ESP) packets. An attacker could exploit this vulnerability by tampering with ESP cleartext values as a man-in-the-middle. | |||||
| CVE-2020-3224 | 1 Cisco | 1 Ios Xe | 2020-06-10 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition. | |||||
| CVE-2020-3200 | 1 Cisco | 2 Ios, Ios Xe | 2020-06-10 | 6.8 MEDIUM | 7.7 HIGH |
| A vulnerability in the Secure Shell (SSH) server code of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. The vulnerability is due to an internal state not being represented correctly in the SSH state machine, which leads to an unexpected behavior. An attacker could exploit this vulnerability by creating an SSH connection to an affected device and using a specific traffic pattern that causes an error condition within that connection. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition. | |||||
| CVE-2020-3212 | 1 Cisco | 1 Ios Xe | 2020-06-10 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker could exploit this vulnerability by uploading a crafted file to the web UI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands with root privileges on the device. | |||||
| CVE-2020-3211 | 1 Cisco | 1 Ios Xe | 2020-06-10 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker who has valid administrative access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the web UI and then submitting that form. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device, which could lead to complete system compromise. | |||||
| CVE-2020-3209 | 1 Cisco | 1 Ios Xe | 2020-06-10 | 7.2 HIGH | 6.8 MEDIUM |
| A vulnerability in software image verification in Cisco IOS XE Software could allow an unauthenticated, physical attacker to install and boot a malicious software image or execute unsigned binaries on an affected device. The vulnerability is due to an improper check on the area of code that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to install and boot a malicious software image or execute unsigned binaries on the targeted device. | |||||