Total
455 CVE
CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
---|---|---|---|---|---|
CVE-2022-20856 | 1 Cisco | 8 Catalyst 9800, Catalyst 9800-40, Catalyst 9800-80 and 5 more | 2022-10-27 | N/A | 7.5 HIGH |
A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) Mobility messages in Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a logic error and improper management of resources related to the handling of CAPWAP Mobility messages. An attacker could exploit this vulnerability by sending crafted CAPWAP Mobility packets to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device. This would cause the device to reload, resulting in a DoS condition. | |||||
CVE-2020-3407 | 1 Cisco | 128 Asr1001-hx, Asr1001-hx-rf, Asr1001-x-rf and 125 more | 2022-10-27 | 7.1 HIGH | 8.6 HIGH |
A vulnerability in the RESTCONF and NETCONF-YANG access control list (ACL) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of the ACL that is tied to the RESTCONF or NETCONF-YANG feature. An attacker could exploit this vulnerability by accessing the device using RESTCONF or NETCONF-YANG. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition. | |||||
CVE-2021-1621 | 1 Cisco | 45 Asr 1000, Asr 1000-x, Asr 1001 and 42 more | 2022-10-24 | 3.3 LOW | 7.4 HIGH |
A vulnerability in the Layer 2 punt code of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a queue wedge on an interface that receives specific Layer 2 frames, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of certain Layer 2 frames. An attacker could exploit this vulnerability by sending specific Layer 2 frames on the segment the router is connected to. A successful exploit could allow the attacker to cause a queue wedge on the interface, resulting in a DoS condition. | |||||
CVE-2021-1616 | 1 Cisco | 1 Ios Xe | 2022-10-24 | 4.3 MEDIUM | 4.7 MEDIUM |
A vulnerability in the H.323 application level gateway (ALG) used by the Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass the ALG. This vulnerability is due to insufficient data validation of traffic that is traversing the ALG. An attacker could exploit this vulnerability by sending crafted traffic to a targeted device. A successful exploit could allow the attacker to bypass the ALG and open connections that should not be allowed to a remote device located behind the ALG. Note: This vulnerability has been publicly discussed as NAT Slipstreaming. | |||||
CVE-2021-34729 | 1 Cisco | 2 Ios Xe, Ios Xe Sd-wan | 2022-10-24 | 7.2 HIGH | 6.7 MEDIUM |
A vulnerability in the CLI of Cisco IOS XE SD-WAN Software and Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input in the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system. An attacker would need valid user credentials to exploit this vulnerability. | |||||
CVE-2022-20870 | 1 Cisco | 193 Catalyst 3650, Catalyst 3650-12x48fd-e, Catalyst 3650-12x48fd-l and 190 more | 2022-10-13 | N/A | 8.6 HIGH |
A vulnerability in the egress MPLS packet processing function of Cisco IOS XE Software for Cisco Catalyst 3650, Catalyst 3850, and Catalyst 9000 Family Switches could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient input validation of IPv4 traffic. An attacker could exploit this vulnerability by sending a malformed packet out of an affected MPLS-enabled interface. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | |||||
CVE-2022-20837 | 1 Cisco | 5 Asr 1000-esp100-x, Asr 1000-esp200-x, Catalyst 8500 and 2 more | 2022-10-13 | N/A | 8.6 HIGH |
A vulnerability in the DNS application layer gateway (ALG) functionality that is used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a logic error that occurs when an affected device inspects certain TCP DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through the affected device that is performing NAT for DNS packets. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on the affected device. Note: This vulnerability can be exploited only by sending IPv4 TCP packets through an affected device. This vulnerability cannot be exploited by sending IPv6 traffic. | |||||
CVE-2022-20915 | 1 Cisco | 1 Ios Xe | 2022-10-13 | N/A | 7.4 HIGH |
A vulnerability in the implementation of IPv6 VPN over MPLS (6VPE) with Zone-Based Firewall (ZBFW) of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error handling of an IPv6 packet that is forwarded from an MPLS and ZBFW-enabled interface in a 6VPE deployment. An attacker could exploit this vulnerability by sending a crafted IPv6 packet sourced from a device on the IPv6-enabled virtual routing and forwarding (VRF) interface through the affected device. A successful exploit could allow the attacker to reload the device, resulting in a DoS condition. | |||||
CVE-2022-20920 | 1 Cisco | 2 Ios, Ios Xe | 2022-10-13 | N/A | 7.7 HIGH |
A vulnerability in the SSH implementation of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to improper handling of resources during an exceptional situation. An attacker could exploit this vulnerability by continuously connecting to an affected device and sending specific SSH requests. A successful exploit could allow the attacker to cause the affected device to reload. | |||||
CVE-2022-20944 | 1 Cisco | 20 Catalyst 9200, Catalyst 9200cx, Catalyst 9200l and 17 more | 2022-10-13 | N/A | 6.8 MEDIUM |
A vulnerability in the software image verification functionality of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. This vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the boot process of the affected device. To exploit this vulnerability, the attacker needs either unauthenticated physical access to the device or privileged access to the root shell on the device. Note: In Cisco IOS XE Software releases 16.11.1 and later, root shell access is protected by the Consent Token mechanism. However, an attacker with level-15 privileges could easily downgrade the Cisco IOS XE Software running on a device to a release where root shell access is more readily available. | |||||
CVE-2022-20847 | 1 Cisco | 8 Catalyst 9800, Catalyst 9800-40, Catalyst 9800-80 and 5 more | 2022-10-05 | N/A | 7.5 HIGH |
A vulnerability in the DHCP processing functionality of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DHCP messages. An attacker could exploit this vulnerability by sending malicious DHCP messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | |||||
CVE-2021-1382 | 1 Cisco | 1 Ios Xe | 2022-09-29 | 7.2 HIGH | 6.7 MEDIUM |
A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges. | |||||
CVE-2021-1383 | 1 Cisco | 2 Ios Xe, Ios Xe Sd-wan | 2022-09-20 | 7.2 HIGH | 6.7 MEDIUM |
Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges. | |||||
CVE-2021-1352 | 1 Cisco | 1 Ios Xe | 2022-09-20 | 2.9 LOW | 6.5 MEDIUM |
A vulnerability in the DECnet Phase IV and DECnet/OSI protocol processing of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation of DECnet traffic that is received by an affected device. An attacker could exploit this vulnerability by sending DECnet traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. | |||||
CVE-2021-1441 | 1 Cisco | 3 Esr6300, Ios Xe, Ir1101 | 2022-09-12 | 7.2 HIGH | 6.7 MEDIUM |
A vulnerability in the hardware initialization routines of Cisco IOS XE Software for Cisco 1100 Series Industrial Integrated Services Routers and Cisco ESR6300 Embedded Series Routers could allow an authenticated, local attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of parameters passed to a diagnostic script that is executed when the device boots up. An attacker could exploit this vulnerability by tampering with an executable file stored on a device. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need administrative level credentials (level 15) on the device. | |||||
CVE-2021-1443 | 1 Cisco | 1 Ios Xe | 2022-08-05 | 8.5 HIGH | 7.2 HIGH |
A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device. | |||||
CVE-2021-1403 | 1 Cisco | 1 Ios Xe | 2022-08-05 | 7.1 HIGH | 7.4 HIGH |
A vulnerability in the web UI feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site WebSocket hijacking (CSWSH) attack and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient HTTP protections in the web UI on an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the web UI to follow a crafted link. A successful exploit could allow the attacker to corrupt memory on the affected device, forcing it to reload and causing a DoS condition. | |||||
CVE-2021-1281 | 1 Cisco | 1 Ios Xe | 2022-08-05 | 6.9 MEDIUM | 6.7 MEDIUM |
A vulnerability in CLI management in Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system as the root user. This vulnerability is due to the way the software handles concurrent CLI sessions. An attacker could exploit this vulnerability by authenticating to the device as an administrative user and executing a sequence of commands. A successful exploit could allow the attacker to obtain access to the underlying operating system as the root user. | |||||
CVE-2021-1384 | 1 Cisco | 1 Ios Xe | 2022-07-29 | 8.5 HIGH | 7.2 HIGH |
A vulnerability in Cisco IOx application hosting environment of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands into the underlying operating system as the root user. This vulnerability is due to incomplete validation of fields in the application packages loaded onto IOx. An attacker could exploit this vulnerability by creating a crafted application .tar file and loading it onto the device. A successful exploit could allow the attacker to perform command injection into the underlying operating system as the root user. | |||||
CVE-2021-1611 | 1 Cisco | 8 Catalyst 9800, Catalyst 9800-40, Catalyst 9800-80 and 5 more | 2022-07-08 | 5.0 MEDIUM | 8.6 HIGH |
A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |