Total
167 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-35252 | 4 Apple, Debian, Haxx and 1 more | 17 Macos, Debian Linux, Curl and 14 more | 2023-03-01 | N/A | 3.7 LOW |
| When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a"sister site" to deny service to all siblings. | |||||
| CVE-2022-35260 | 3 Apple, Haxx, Netapp | 11 Macos, Curl, Clustered Data Ontap and 8 more | 2023-03-01 | N/A | 6.5 MEDIUM |
| curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service. | |||||
| CVE-2022-32221 | 4 Apple, Debian, Haxx and 1 more | 12 Macos, Debian Linux, Curl and 9 more | 2023-03-01 | N/A | 9.8 CRITICAL |
| When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST. | |||||
| CVE-2022-27778 | 3 Haxx, Netapp, Oracle | 18 Curl, Active Iq Unified Manager, Bh500s Firmware and 15 more | 2023-02-28 | 5.8 MEDIUM | 8.1 HIGH |
| A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`. | |||||
| CVE-2021-3537 | 6 Debian, Fedoraproject, Netapp and 3 more | 20 Debian Linux, Fedora, Active Iq Unified Manager and 17 more | 2023-02-28 | 4.3 MEDIUM | 5.9 MEDIUM |
| A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability. | |||||
| CVE-2018-15473 | 7 Canonical, Debian, Netapp and 4 more | 24 Ubuntu Linux, Debian Linux, Aff Baseboard Management Controller and 21 more | 2023-02-23 | 5.0 MEDIUM | 5.3 MEDIUM |
| OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c. | |||||
| CVE-2022-40304 | 3 Apple, Netapp, Xmlsoft | 22 Ipados, Iphone Os, Macos and 19 more | 2023-02-23 | N/A | 7.8 HIGH |
| An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked. | |||||
| CVE-2022-27774 | 4 Brocade, Debian, Haxx and 1 more | 16 Fabric Operating System, Debian Linux, Curl and 13 more | 2023-02-23 | 3.5 LOW | 5.7 MEDIUM |
| An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers. | |||||
| CVE-2021-21707 | 4 Debian, Netapp, Php and 1 more | 4 Debian Linux, Clustered Data Ontap, Php and 1 more | 2023-02-15 | 5.0 MEDIUM | 5.3 MEDIUM |
| In PHP versions 7.3.x below 7.3.33, 7.4.x below 7.4.26 and 8.0.x below 8.0.13, certain XML parsing functions, like simplexml_load_file(), URL-decode the filename passed to them. If that filename contains URL-encoded NUL character, this may cause the function to interpret this as the end of the filename, thus interpreting the filename differently from what the user intended, which may lead it to reading a different file than intended. | |||||
| CVE-2022-32206 | 5 Debian, Fedoraproject, Haxx and 2 more | 29 Debian Linux, Fedora, Curl and 26 more | 2023-02-15 | 4.3 MEDIUM | 6.5 MEDIUM |
| curl < 7.84.0 supports "chained" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable "links" in this "decompression chain" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a "malloc bomb", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. | |||||
| CVE-2021-41617 | 5 Fedoraproject, Netapp, Openbsd and 2 more | 14 Fedora, Active Iq Unified Manager, Aff 500f and 11 more | 2023-02-14 | 4.4 MEDIUM | 7.0 HIGH |
| sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user. | |||||
| CVE-2022-1292 | 5 Debian, Fedoraproject, Netapp and 2 more | 51 Debian Linux, Fedora, A250 and 48 more | 2023-02-14 | 10.0 HIGH | 9.8 CRITICAL |
| The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd). | |||||
| CVE-2022-1343 | 2 Netapp, Openssl | 43 A250, A250 Firmware, A700s and 40 more | 2023-02-14 | 4.3 MEDIUM | 5.3 MEDIUM |
| The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | |||||
| CVE-2022-1473 | 2 Netapp, Openssl | 43 A250, A250 Firmware, A700s and 40 more | 2023-02-14 | 5.0 MEDIUM | 7.5 HIGH |
| The OPENSSL_LH_flush() function, which empties a hash table, contains a bug that breaks reuse of the memory occuppied by the removed hash table entries. This function is used when decoding certificates or keys. If a long lived process periodically decodes certificates or keys its memory usage will expand without bounds and the process might be terminated by the operating system causing a denial of service. Also traversing the empty hash table entries will take increasingly more time. Typically such long lived processes might be TLS clients or TLS servers configured to accept client certificate authentication. The function was added in the OpenSSL 3.0 version thus older releases are not affected by the issue. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | |||||
| CVE-2022-1434 | 2 Netapp, Openssl | 43 A250, A250 Firmware, A700s and 40 more | 2023-02-14 | 4.3 MEDIUM | 5.9 MEDIUM |
| The OpenSSL 3.0 implementation of the RC4-MD5 ciphersuite incorrectly uses the AAD data as the MAC key. This makes the MAC key trivially predictable. An attacker could exploit this issue by performing a man-in-the-middle attack to modify data being sent from one endpoint to an OpenSSL 3.0 recipient such that the modified data would still pass the MAC integrity check. Note that data sent from an OpenSSL 3.0 endpoint to a non-OpenSSL 3.0 endpoint will always be rejected by the recipient and the connection will fail at that point. Many application protocols require data to be sent from the client to the server first. Therefore, in such a case, only an OpenSSL 3.0 server would be impacted when talking to a non-OpenSSL 3.0 client. If both endpoints are OpenSSL 3.0 then the attacker could modify data being sent in both directions. In this case both clients and servers could be affected, regardless of the application protocol. Note that in the absence of an attacker this bug means that an OpenSSL 3.0 endpoint communicating with a non-OpenSSL 3.0 endpoint will fail to complete the handshake when using this ciphersuite. The confidentiality of data is not impacted by this issue, i.e. an attacker cannot decrypt data that has been encrypted using this ciphersuite - they can only modify it. In order for this attack to work both endpoints must legitimately negotiate the RC4-MD5 ciphersuite. This ciphersuite is not compiled by default in OpenSSL 3.0, and is not available within the default provider or the default ciphersuite list. This ciphersuite will never be used if TLSv1.3 has been negotiated. In order for an OpenSSL 3.0 endpoint to use this ciphersuite the following must have occurred: 1) OpenSSL must have been compiled with the (non-default) compile time option enable-weak-ssl-ciphers 2) OpenSSL must have had the legacy provider explicitly loaded (either through application code or via configuration) 3) The ciphersuite must have been explicitly added to the ciphersuite list 4) The libssl security level must have been set to 0 (default is 1) 5) A version of SSL/TLS below TLSv1.3 must have been negotiated 6) Both endpoints must negotiate the RC4-MD5 ciphersuite in preference to any others that both endpoints have in common Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | |||||
| CVE-2016-8610 | 4 Debian, Netapp, Openssl and 1 more | 28 Debian Linux, Clustered Data Ontap, Clustered Data Ontap Antivirus Connector and 25 more | 2023-02-12 | 5.0 MEDIUM | 7.5 HIGH |
| A denial of service flaw was found in OpenSSL 0.9.8, 1.0.1, 1.0.2 through 1.0.2h, and 1.1.0 in the way the TLS/SSL protocol defined processing of ALERT packets during a connection handshake. A remote attacker could use this flaw to make a TLS/SSL server consume an excessive amount of CPU and fail to accept connections from other clients. | |||||
| CVE-2019-5612 | 2 Freebsd, Netapp | 2 Freebsd, Clustered Data Ontap | 2023-01-31 | 7.8 HIGH | 7.5 HIGH |
| In FreeBSD 12.0-STABLE before r351264, 12.0-RELEASE before 12.0-RELEASE-p10, 11.3-STABLE before r351265, 11.3-RELEASE before 11.3-RELEASE-p3, and 11.2-RELEASE before 11.2-RELEASE-p14, the kernel driver for /dev/midistat implements a read handler that is not thread-safe. A multi-threaded program can exploit races in the handler to copy out kernel memory outside the boundaries of midistat's data buffer. | |||||
| CVE-2019-5611 | 2 Freebsd, Netapp | 2 Freebsd, Clustered Data Ontap | 2023-01-31 | 7.8 HIGH | 7.5 HIGH |
| In FreeBSD 12.0-STABLE before r350828, 12.0-RELEASE before 12.0-RELEASE-p10, 11.3-STABLE before r350829, 11.3-RELEASE before 11.3-RELEASE-p3, and 11.2-RELEASE before 11.2-RELEASE-p14, a missing check in the function to arrange data in a chain of mbufs could cause data returned not to be contiguous. Extra checks in the IPv6 stack could catch the error condition and trigger a kernel panic, leading to a remote denial of service. | |||||
| CVE-2019-5610 | 2 Freebsd, Netapp | 2 Freebsd, Clustered Data Ontap | 2023-01-31 | 5.0 MEDIUM | 7.5 HIGH |
| In FreeBSD 12.0-STABLE before r350637, 12.0-RELEASE before 12.0-RELEASE-p9, 11.3-STABLE before r350638, 11.3-RELEASE before 11.3-RELEASE-p2, and 11.2-RELEASE before 11.2-RELEASE-p13, the bsnmp library is not properly validating the submitted length from a type-length-value encoding. A remote user could cause an out-of-bounds read or trigger a crash of the software such as bsnmpd resulting in a denial of service. | |||||
| CVE-2019-5608 | 2 Freebsd, Netapp | 2 Freebsd, Clustered Data Ontap | 2023-01-31 | 7.5 HIGH | 9.8 CRITICAL |
| In FreeBSD 12.0-STABLE before r350648, 12.0-RELEASE before 12.0-RELEASE-p9, 11.3-STABLE before r350650, 11.3-RELEASE before 11.3-RELEASE-p2, and 11.2-RELEASE before 11.2-RELEASE-p13, the ICMPv6 input path incorrectly handles cases where an MLDv2 listener query packet is internally fragmented across multiple mbufs. A remote attacker may be able to cause an out-of-bounds read or write that may cause the kernel to attempt to access an unmapped page and subsequently panic. | |||||