Total
97 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-3454 | 1 Cisco | 83 Mds 9000, Mds 9100, Mds 9134 and 80 more | 2020-09-03 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS. | |||||
| CVE-2020-3415 | 1 Cisco | 66 Nexus 3016, Nexus 3048, Nexus 3064 and 63 more | 2020-09-03 | 7.9 HIGH | 8.8 HIGH |
| A vulnerability in the Data Management Engine (DME) of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Exploitation of this vulnerability also requires jumbo frames to be enabled on the interface that receives the crafted Cisco Discovery Protocol packets on the affected device. | |||||
| CVE-2018-0331 | 1 Cisco | 77 Firepower 4110, Firepower 4120, Firepower 4140 and 74 more | 2020-08-31 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007. | |||||
| CVE-2016-1454 | 1 Cisco | 54 5548p, 5548up, 5596t and 51 more | 2020-08-25 | 7.1 HIGH | 6.5 MEDIUM |
| Cisco NX-OS 4.0 through 7.3 and 11.0 through 11.2 on 1000v, 2000, 3000, 3500, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote attackers to cause a denial of service (device reload) by leveraging a peer relationship to send a crafted BGP UPDATE message, aka Bug IDs CSCuq77105 and CSCux11417. | |||||
| CVE-2020-10136 | 4 Cisco, Digi, Hp and 1 more | 63 Nexus 1000v, Nexus 1000ve, Nexus 3016 and 60 more | 2020-07-29 | 5.0 MEDIUM | 5.3 MEDIUM |
| Multiple products that implement the IP Encapsulation within IP standard (RFC 2003, STD 1) decapsulate and route IP-in-IP traffic without any validation, which could allow an unauthenticated remote attacker to route arbitrary traffic via an exposed network interface and lead to spoofing, access control bypass, and other unexpected network behaviors. | |||||
| CVE-2020-3172 | 1 Cisco | 107 Firepower 4110, Firepower 4115, Firepower 4120 and 104 more | 2020-03-05 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability. | |||||
| CVE-2020-3165 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2020-03-04 | 4.3 MEDIUM | 8.2 HIGH |
| A vulnerability in the implementation of Border Gateway Protocol (BGP) Message Digest 5 (MD5) authentication in Cisco NX-OS Software could allow an unauthenticated, remote attacker to bypass MD5 authentication and establish a BGP connection with the device. The vulnerability occurs because the BGP MD5 authentication is bypassed if the peer does not have MD5 authentication configured, the NX-OS device does have BGP MD5 authentication configured, and the NX-OS BGP virtual routing and forwarding (VRF) name is configured to be greater than 19 characters. An attacker could exploit this vulnerability by attempting to establish a BGP session with the NX-OS peer. A successful exploit could allow the attacker to establish a BGP session with the NX-OS device without MD5 authentication. The Cisco implementation of the BGP protocol accepts incoming BGP traffic only from explicitly configured peers. To exploit this vulnerability, an attacker must send the malicious packets over a TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the affected system’s trusted network. | |||||
| CVE-2020-3174 | 1 Cisco | 80 Mds 9132t, Mds 9148s, Mds 9148t and 77 more | 2020-03-03 | 3.3 LOW | 4.7 MEDIUM |
| A vulnerability in the anycast gateway feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a device to learn invalid Address Resolution Protocol (ARP) entries. The ARP entries are for nonlocal IP addresses for the subnet. The vulnerability is due to improper validation of a received gratuitous ARP (GARP) request. An attacker could exploit this vulnerability by sending a malicious GARP packet on the local subnet to cause the ARP table on the device to become corrupted. A successful exploit could allow the attacker to populate the ARP table with incorrect entries, which could lead to traffic disruptions. | |||||
| CVE-2020-3119 | 1 Cisco | 83 Nexus 3016, Nexus 3048, Nexus 3064 and 80 more | 2020-02-12 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2020-3120 | 1 Cisco | 143 Asr 9000v, Asr 9001, Asr 9006 and 140 more | 2020-02-11 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2019-1977 | 1 Cisco | 23 Nexus 9000, Nexus 93108tc-ex, Nexus 93108tc-fx and 20 more | 2019-10-09 | 4.3 MEDIUM | 7.5 HIGH |
| A vulnerability within the Endpoint Learning feature of Cisco Nexus 9000 Series Switches running in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an endpoint device in certain circumstances. The vulnerability is due to improper endpoint learning when packets are received on a specific port from outside the ACI fabric and destined to an endpoint located on a border leaf when Disable Remote Endpoint Learning has been enabled. This can result in a Remote (XR) entry being created for the impacted endpoint that will become stale if the endpoint migrates to a different port or leaf switch. This results in traffic not reaching the impacted endpoint until the Remote entry can be relearned by another mechanism. | |||||
| CVE-2019-1770 | 1 Cisco | 106 7000 10-slot, 7000 18-slot, 7000 4-slot and 103 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1963 | 1 Cisco | 130 7000 10-slot, 7000 18-slot, 7000 4-slot and 127 more | 2019-10-09 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. | |||||
| CVE-2019-1615 | 1 Cisco | 44 9432pq, 9536pq, 9636pq and 41 more | 2019-10-09 | 4.6 MEDIUM | 6.7 MEDIUM |
| A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability is due to improper verification of digital signatures for software images. An attacker could exploit this vulnerability by loading an unsigned software image on an affected device. A successful exploit could allow the attacker to boot a malicious software image. Note: The fix for this vulnerability requires a BIOS upgrade as part of the software upgrade. For additional information, see the Details section of this advisory. Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I7(5). Nexus 9000 Series Fabric Switches in ACI Mode are affected running software versions prior to 13.2(1l). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I7(5). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1585 | 1 Cisco | 20 Application Policy Infrastructure Controller Software, Nexus 92160yc-x, Nexus 92304qc and 17 more | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the controller authorization functionality of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escalate standard users with root privilege on an affected device. The vulnerability is due to a misconfiguration of certain sudoers files for the bashroot component on an affected device. An attacker could exploit this vulnerability by authenticating to the affected device with a crafted user ID, which may allow temporary administrative access to escalate privileges. A successful exploit could allow the attacker to escalate privileges on an affected device. This Vulnerability has been fixed in version 4.0(1h) | |||||
| CVE-2019-1590 | 1 Cisco | 28 Nexus 9000, Nexus 92160yc-x, Nexus 92300yc and 25 more | 2019-10-09 | 6.8 MEDIUM | 8.1 HIGH |
| A vulnerability in the Transport Layer Security (TLS) certificate validation functionality of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to perform insecure TLS client authentication on an affected device. The vulnerability is due to insufficient TLS client certificate validations for certificates sent between the various components of an ACI fabric. An attacker who has possession of a certificate that is trusted by the Cisco Manufacturing CA and the corresponding private key could exploit this vulnerability by presenting a valid certificate while attempting to connect to the targeted device. An exploit could allow the attacker to gain full control of all other components within the ACI fabric of an affected device. | |||||
| CVE-2019-12717 | 1 Cisco | 88 Nexus 3016, Nexus 3048, Nexus 3064 and 85 more | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in a CLI command related to the virtualization manager (VMAN) in Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on an affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges, which may lead to complete system compromise. An attacker would need valid administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-12662 | 1 Cisco | 135 Ios Xe, Mds 9000, Nexus 3016 and 132 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in Cisco NX-OS Software and Cisco IOS XE Software could allow an authenticated, local attacker with valid administrator or privilege level 15 credentials to load a virtual service image and bypass signature verification on an affected device. The vulnerability is due to improper signature verification during the installation of an Open Virtual Appliance (OVA) image. An authenticated, local attacker could exploit this vulnerability and load a malicious, unsigned OVA image on an affected device. A successful exploit could allow an attacker to perform code execution on a crafted software OVA image. | |||||
| CVE-2018-0294 | 1 Cisco | 74 Firepower 4110, Firepower 4120, Firepower 4140 and 71 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753. | |||||
| CVE-2018-0293 | 1 Cisco | 65 Mds 9100, Nexus 172tq-xl, Nexus 3016 and 62 more | 2019-10-09 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904. | |||||