Total
97 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-1590 | 1 Cisco | 103 Nexus 3000, Nexus 3048, Nexus 31108pc-v and 100 more | 2021-09-03 | 4.3 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the implementation of the system login block-for command for Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a login process to unexpectedly restart, causing a denial of service (DoS) condition. This vulnerability is due to a logic error in the implementation of the system login block-for command when an attack is detected and acted upon. An attacker could exploit this vulnerability by performing a brute-force login attack on an affected device. A successful exploit could allow the attacker to cause a login process to reload, which could result in a delay during authentication to the affected device. | |||||
| CVE-2021-1588 | 1 Cisco | 67 Nexus 3000, Nexus 3048, Nexus 31108pc-v and 64 more | 2021-09-03 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when an affected device is processing an MPLS echo-request or echo-reply packet. An attacker could exploit this vulnerability by sending malicious MPLS echo-request or echo-reply packets to an interface that is enabled for MPLS forwarding on the affected device. A successful exploit could allow the attacker to cause the MPLS OAM process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. | |||||
| CVE-2021-1587 | 1 Cisco | 63 Nexus 3000, Nexus 3048, Nexus 31108pc-v and 60 more | 2021-09-02 | 4.3 MEDIUM | 8.6 HIGH |
| A vulnerability in the VXLAN Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific packets with a Transparent Interconnection of Lots of Links (TRILL) OAM EtherType. An attacker could exploit this vulnerability by sending crafted packets, including the TRILL OAM EtherType of 0x8902, to a device that is part of a VXLAN Ethernet VPN (EVPN) fabric. A successful exploit could allow the attacker to cause an affected device to experience high CPU usage and consume excessive system resources, which may result in overall control plane instability and cause the affected device to reload. Note: The NGOAM feature is disabled by default. | |||||
| CVE-2021-1586 | 1 Cisco | 41 Nexus 9000v, Nexus 92160yc-x, Nexus 92300yc and 38 more | 2021-09-02 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the Multi-Pod or Multi-Site network configurations for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to unexpectedly restart the device, resulting in a denial of service (DoS) condition. This vulnerability exists because TCP traffic sent to a specific port on an affected device is not properly sanitized. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port that is listening on a public-facing IP address for the Multi-Pod or Multi-Site configuration. A successful exploit could allow the attacker to cause the device to restart unexpectedly, resulting in a DoS condition. | |||||
| CVE-2020-3397 | 1 Cisco | 64 Nexus 3016, Nexus 3048, Nexus 3064 and 61 more | 2021-08-06 | 7.1 HIGH | 8.6 HIGH |
| A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this specific, valid BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause one of the BGP-related routing applications to restart multiple times, leading to a system-level restart. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. | |||||
| CVE-2020-3398 | 1 Cisco | 67 Nexus 3016, Nexus 3048, Nexus 3064 and 64 more | 2021-08-06 | 4.3 MEDIUM | 8.6 HIGH |
| A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a BGP session to repeatedly reset, causing a partial denial of service (DoS) condition due to the BGP session being down. The vulnerability is due to incorrect parsing of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause the BGP peer connections to reset, which could lead to BGP route instability and impact traffic. The incoming BGP MVPN update message is valid but is parsed incorrectly by the NX-OS device, which could send a corrupted BGP update to the configured BGP peer. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. | |||||
| CVE-2020-3338 | 1 Cisco | 67 Nexus 3016, Nexus 3048, Nexus 3064 and 64 more | 2021-08-06 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Protocol Independent Multicast (PIM) feature for IPv6 networks (PIM6) of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper error handling when processing inbound PIM6 packets. An attacker could exploit this vulnerability by sending multiple crafted PIM6 packets to an affected device. A successful exploit could allow the attacker to cause the PIM6 application to leak system memory. Over time, this memory leak could cause the PIM6 application to stop processing legitimate PIM6 traffic, leading to a DoS condition on the affected device. | |||||
| CVE-2021-1361 | 1 Cisco | 49 Nexus 3000, Nexus 3100, Nexus 3100-z and 46 more | 2021-03-05 | 9.4 HIGH | 9.1 CRITICAL |
| A vulnerability in the implementation of an internal file management service for Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode that are running Cisco NX-OS Software could allow an unauthenticated, remote attacker to create, delete, or overwrite arbitrary files with root privileges on the device. This vulnerability exists because TCP port 9075 is incorrectly configured to listen and respond to external connection requests. An attacker could exploit this vulnerability by sending crafted TCP packets to an IP address that is configured on a local interface on TCP port 9075. A successful exploit could allow the attacker to create, delete, or overwrite arbitrary files, including sensitive files that are related to the device configuration. For example, the attacker could add a user account without the device administrator knowing. | |||||
| CVE-2021-1230 | 1 Cisco | 41 Nexus 9000v, Nexus 92160yc-x, Nexus 92300yc and 38 more | 2021-03-05 | 7.1 HIGH | 7.5 HIGH |
| A vulnerability with the Border Gateway Protocol (BGP) for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a routing process to crash, which could lead to a denial of service (DoS) condition. This vulnerability is due to an issue with the installation of routes upon receipt of a BGP update. An attacker could exploit this vulnerability by sending a crafted BGP update to an affected device. A successful exploit could allow the attacker to cause the routing process to crash, which could cause the device to reload. This vulnerability applies to both Internal BGP (IBGP) and External BGP (EBGP). Note: The Cisco implementation of BGP accepts incoming BGP traffic from explicitly configured peers only. To exploit this vulnerability, an attacker would need to send a specific BGP update message over an established TCP connection that appears to come from a trusted BGP peer. | |||||
| CVE-2021-1368 | 1 Cisco | 101 Firepower 4110, Firepower 4112, Firepower 4115 and 98 more | 2021-03-03 | 4.9 MEDIUM | 8.8 HIGH |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted Cisco UDLD protocol packets to a directly connected, affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco UDLD process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. The attacker needs full control of a directly connected device. That device must be connected over a port channel that has UDLD enabled. To trigger arbitrary code execution, both the UDLD-enabled port channel and specific system conditions must exist. In the absence of either the UDLD-enabled port channel or the system conditions, attempts to exploit this vulnerability will result in a DoS condition. It is possible, but highly unlikely, that an attacker could control the necessary conditions for exploitation. The CVSS score reflects this possibility. However, given the complexity of exploitation, Cisco has assigned a Medium Security Impact Rating (SIR) to this vulnerability. | |||||
| CVE-2021-1229 | 1 Cisco | 86 Mds 9148s, Mds 9250i, Mds 9706 and 83 more | 2021-03-03 | 4.3 MEDIUM | 5.3 MEDIUM |
| A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted device. A successful exploit could allow the attacker to cause a system memory leak in the ICMPv6 process on the device. As a result, the ICMPv6 process could run out of system memory and stop processing traffic. The device could then drop all ICMPv6 packets, causing traffic instability on the device. Restoring device functionality would require a device reboot. | |||||
| CVE-2019-1791 | 1 Cisco | 129 7000 10-slot, 7000 18-slot, 7000 4-slot and 126 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1795 | 1 Cisco | 144 7000 10-slot, 7000 18-slot, 7000 4-slot and 141 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1790 | 1 Cisco | 134 7000 10-slot, 7000 18-slot, 7000 4-slot and 131 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with valid administrator credentials to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1781 | 1 Cisco | 97 Firepower 4110, Firepower 4120, Firepower 4140 and 94 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1782 | 1 Cisco | 97 Firepower 4110, Firepower 4120, Firepower 4140 and 94 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1779 | 1 Cisco | 90 Firepower 4110, Firepower 4112, Firepower 4115 and 87 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid device credentials to exploit this vulnerability. | |||||
| CVE-2019-1767 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. NX-OS versions prior to 8.3(1) are affected. | |||||
| CVE-2019-1735 | 1 Cisco | 82 Mds 9000, Mds 9100, Mds 9200 and 79 more | 2020-10-16 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid user credentials to exploit this vulnerability. | |||||
| CVE-2019-1592 | 1 Cisco | 28 Nexus 9000, Nexus 92160yc-x, Nexus 92300yc and 25 more | 2020-10-16 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the background operations functionality of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker to gain elevated privileges as root on an affected device. The vulnerability is due to insufficient validation of user-supplied files on an affected device. An attacker could exploit this vulnerability by logging in to the CLI of the affected device and creating a crafted file in a specific directory on the filesystem. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. | |||||