Total
210374 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-2961 | 2 Fedoraproject, Linux | 2 Fedora, Linux Kernel | 2023-02-14 | N/A | 7.0 HIGH |
| A use-after-free flaw was found in the Linux kernel’s PLP Rose functionality in the way a user triggers a race condition by calling bind while simultaneously triggering the rose_bind() function. This flaw allows a local user to crash or potentially escalate their privileges on the system. | |||||
| CVE-2022-2959 | 1 Linux | 1 Linux Kernel | 2023-02-14 | N/A | 7.0 HIGH |
| A race condition was found in the Linux kernel's watch queue due to a missing lock in pipe_resize_ring(). The specific flaw exists within the handling of pipe buffers. The issue results from the lack of proper locking when performing operations on an object. This flaw allows a local user to crash the system or escalate their privileges on the system. | |||||
| CVE-2022-2503 | 1 Linux | 1 Linux Kernel | 2023-02-14 | N/A | 6.7 MEDIUM |
| Dm-verity is used for extending root-of-trust to root filesystems. LoadPin builds on this property to restrict module/firmware loads to just the trusted root filesystem. Device-mapper table reloads currently allow users with root privileges to switch out the target with an equivalent dm-linear target and bypass verification till reboot. This allows root to bypass LoadPin and can be used to load untrusted and unverified kernel modules and firmware, which implies arbitrary kernel execution and persistence for peripherals that do not verify firmware updates. We recommend upgrading past commit 4caae58406f8ceb741603eee460d79bacca9b1b5 | |||||
| CVE-2022-1158 | 3 Fedoraproject, Linux, Redhat | 3 Fedora, Linux Kernel, Enterprise Linux | 2023-02-14 | N/A | 7.8 HIGH |
| A flaw was found in KVM. When updating a guest's page table entry, vm_pgoff was improperly used as the offset to get the page's pfn. As vaddr and vm_pgoff are controllable by user-mode processes, this flaw allows unprivileged local users on the host to write outside the userspace region and potentially corrupt the kernel, resulting in a denial of service condition. | |||||
| CVE-2022-33984 | 1 Insyde | 1 Kernel | 2023-02-14 | N/A | 7.0 HIGH |
| DMA transactions which are targeted at input buffers used for the SdMmcDevice software SMI handler could cause SMRAM corruption through a TOCTOU attack. DMA transactions which are targeted at input buffers used for the software SMI handler used by the SdMmcDevice driver could cause SMRAM corruption through a TOCTOU attack. This issue was discovered by Insyde engineering based on the general description provided by Intel's iSTARE group. This was fixed in kernel 5.2: 05.27.25, kernel 5.3: 05.36.25, kernel 5.4: 05.44.25, kernel 5.5: 05.52.25 https://www.insyde.com/security-pledge/SA-2022054 | |||||
| CVE-2022-33906 | 1 Insyde | 1 Kernel | 2023-02-14 | N/A | 6.4 MEDIUM |
| DMA transactions which are targeted at input buffers used for the FwBlockServiceSmm software SMI handler could cause SMRAM corruption through a TOCTOU attack. DMA transactions which are targeted at input buffers used for the software SMI handler used by the FwBlockServiceSmm driver could cause SMRAM corruption through a TOCTOU attack. This issue was discovered by Insyde engineering based on the general description provided by Intel's iSTARE group. Fixed in kernel 5.2: 05.27.23, 5.3: 05.36.23, 5.4: 05.44.23, 5.5: 05.52.23 https://www.insyde.com/security-pledge/SA-2022048 | |||||
| CVE-2022-31243 | 1 Insyde | 1 Kernel | 2023-02-14 | N/A | 6.4 MEDIUM |
| Update description and links DMA transactions which are targeted at input buffers used for the software SMI handler used by the FvbServicesRuntimeDxe driver could cause SMRAM corruption through a TOCTOU attack.. "DMA transactions which are targeted at input buffers used for the software SMI handler used by the FvbServicesRuntimeDxe driver could cause SMRAM corruption. This issue was discovered by Insyde engineering based on the general description provided by Intel's iSTARE group. Fixed in Kernel 5.2: 05.27.21. Kernel 5.3: 05.36.21. Kernel 5.4: 05.44.21. Kernel 5.5: 05.52.21 https://www.insyde.com/security-pledge/SA-2022044 | |||||
| CVE-2022-30774 | 1 Insyde | 1 Kernel | 2023-02-14 | N/A | 6.4 MEDIUM |
| DMA attacks on the parameter buffer used by the PnpSmm driver could change the contents after parameter values have been checked but before they are used (a TOCTOU attack) DMA attacks on the parameter buffer used by the PnpSmm driver could change the contents after parameter values have been checked but before they are used (a TOCTOU attack) . This issue was discovered by Insyde engineering during a security review. This iss was fixed in Kernel 5.2: 05.27.29, Kernel 5.3: 05.36.25, Kernel 5.4: 05.44.25, Kernel 5.5: 05.52.25. CWE-367 https://www.insyde.com/security-pledge/SA-2022043 | |||||
| CVE-2022-33982 | 1 Insyde | 1 Kernel | 2023-02-14 | N/A | 6.4 MEDIUM |
| DMA attacks on the parameter buffer used by the Int15ServiceSmm software SMI handler could lead to a TOCTOU attack on the SMI handler and lead to corruption of SMRAM. DMA attacks on the parameter buffer used by the software SMI handler used by the driver Int15ServiceSmm could lead to a TOCTOU attack on the SMI handler and lead to corruption of SMRAM. This issue was discovered by Insyde engineering during a security review. This issue is fixed in Kernel 5.2: 05.27.23, Kernel 5.3: 05.36.23, Kernel 5.4: 05.44.23 and Kernel 5.5: 05.52.23 CWE-367 | |||||
| CVE-2022-33907 | 1 Insyde | 1 Kernel | 2023-02-14 | N/A | 6.4 MEDIUM |
| DMA transactions which are targeted at input buffers used for the software SMI handler used by the IdeBusDxe driver could cause SMRAM corruption through a TOCTOU attack... DMA transactions which are targeted at input buffers used for the software SMI handler used by the IdeBusDxe driver could cause SMRAM corruption through a TOCTOU attack. This issue was discovered by Insyde engineering based on the general description provided by Intel's iSTARE group. Fixed in kernel 5.2: 05.27.25, kernel 5.3: 05.36.25, kernel 5.4: 05.44.25 https://www.insyde.com/security-pledge/SA-2022049 | |||||
| CVE-2022-1473 | 2 Netapp, Openssl | 43 A250, A250 Firmware, A700s and 40 more | 2023-02-14 | 5.0 MEDIUM | 7.5 HIGH |
| The OPENSSL_LH_flush() function, which empties a hash table, contains a bug that breaks reuse of the memory occuppied by the removed hash table entries. This function is used when decoding certificates or keys. If a long lived process periodically decodes certificates or keys its memory usage will expand without bounds and the process might be terminated by the operating system causing a denial of service. Also traversing the empty hash table entries will take increasingly more time. Typically such long lived processes might be TLS clients or TLS servers configured to accept client certificate authentication. The function was added in the OpenSSL 3.0 version thus older releases are not affected by the issue. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | |||||
| CVE-2022-1434 | 2 Netapp, Openssl | 43 A250, A250 Firmware, A700s and 40 more | 2023-02-14 | 4.3 MEDIUM | 5.9 MEDIUM |
| The OpenSSL 3.0 implementation of the RC4-MD5 ciphersuite incorrectly uses the AAD data as the MAC key. This makes the MAC key trivially predictable. An attacker could exploit this issue by performing a man-in-the-middle attack to modify data being sent from one endpoint to an OpenSSL 3.0 recipient such that the modified data would still pass the MAC integrity check. Note that data sent from an OpenSSL 3.0 endpoint to a non-OpenSSL 3.0 endpoint will always be rejected by the recipient and the connection will fail at that point. Many application protocols require data to be sent from the client to the server first. Therefore, in such a case, only an OpenSSL 3.0 server would be impacted when talking to a non-OpenSSL 3.0 client. If both endpoints are OpenSSL 3.0 then the attacker could modify data being sent in both directions. In this case both clients and servers could be affected, regardless of the application protocol. Note that in the absence of an attacker this bug means that an OpenSSL 3.0 endpoint communicating with a non-OpenSSL 3.0 endpoint will fail to complete the handshake when using this ciphersuite. The confidentiality of data is not impacted by this issue, i.e. an attacker cannot decrypt data that has been encrypted using this ciphersuite - they can only modify it. In order for this attack to work both endpoints must legitimately negotiate the RC4-MD5 ciphersuite. This ciphersuite is not compiled by default in OpenSSL 3.0, and is not available within the default provider or the default ciphersuite list. This ciphersuite will never be used if TLSv1.3 has been negotiated. In order for an OpenSSL 3.0 endpoint to use this ciphersuite the following must have occurred: 1) OpenSSL must have been compiled with the (non-default) compile time option enable-weak-ssl-ciphers 2) OpenSSL must have had the legacy provider explicitly loaded (either through application code or via configuration) 3) The ciphersuite must have been explicitly added to the ciphersuite list 4) The libssl security level must have been set to 0 (default is 1) 5) A version of SSL/TLS below TLSv1.3 must have been negotiated 6) Both endpoints must negotiate the RC4-MD5 ciphersuite in preference to any others that both endpoints have in common Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | |||||
| CVE-2022-1343 | 2 Netapp, Openssl | 43 A250, A250 Firmware, A700s and 40 more | 2023-02-14 | 4.3 MEDIUM | 5.3 MEDIUM |
| The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | |||||
| CVE-2022-1292 | 5 Debian, Fedoraproject, Netapp and 2 more | 51 Debian Linux, Fedora, A250 and 48 more | 2023-02-14 | 10.0 HIGH | 9.8 CRITICAL |
| The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd). | |||||
| CVE-2022-28327 | 2 Fedoraproject, Golang | 3 Extra Packages For Enterprise Linux, Fedora, Go | 2023-02-14 | 5.0 MEDIUM | 7.5 HIGH |
| The generic P-256 feature in crypto/elliptic in Go before 1.17.9 and 1.18.x before 1.18.1 allows a panic via long scalar input. | |||||
| CVE-2022-24675 | 3 Fedoraproject, Golang, Netapp | 3 Fedora, Go, Kubernetes Monitoring Operator | 2023-02-14 | 5.0 MEDIUM | 7.5 HIGH |
| encoding/pem in Go before 1.17.9 and 1.18.x before 1.18.1 has a Decode stack overflow via a large amount of PEM data. | |||||
| CVE-2022-24921 | 3 Debian, Golang, Netapp | 3 Debian Linux, Go, Astra Trident | 2023-02-14 | 5.0 MEDIUM | 7.5 HIGH |
| regexp.Compile in Go before 1.16.15 and 1.17.x before 1.17.8 allows stack exhaustion via a deeply nested expression. | |||||
| CVE-2021-44717 | 3 Debian, Golang, Opengroup | 3 Debian Linux, Go, Unix | 2023-02-14 | 5.8 MEDIUM | 4.8 MEDIUM |
| Go before 1.16.12 and 1.17.x before 1.17.5 on UNIX allows write operations to an unintended file or unintended network connection as a consequence of erroneous closing of file descriptor 0 after file-descriptor exhaustion. | |||||
| CVE-2021-44716 | 3 Debian, Golang, Netapp | 3 Debian Linux, Go, Cloud Insights Telegraf | 2023-02-14 | 5.0 MEDIUM | 7.5 HIGH |
| net/http in Go before 1.16.12 and 1.17.x before 1.17.5 allows uncontrolled memory consumption in the header canonicalization cache via HTTP/2 requests. | |||||
| CVE-2021-43391 | 1 Opendesign | 1 Drawings Software Development Kit | 2023-02-14 | 6.8 MEDIUM | 7.8 HIGH |
| An Out-of-Bounds Read vulnerability exists when reading a DXF file using Open Design Alliance Drawings SDK before 2022.11. The specific issue exists within the parsing of DXF files. Crafted data in a DXF file (an invalid dash counter in line types) can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||