Total
52 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-1842 | 1 Cisco | 29 Asr 9001, Asr 9006, Asr 9010 and 26 more | 2020-10-16 | 5.5 MEDIUM | 5.4 MEDIUM |
| A vulnerability in the Secure Shell (SSH) authentication function of Cisco IOS XR Software could allow an authenticated, remote attacker to successfully log in to an affected device using two distinct usernames. The vulnerability is due to a logic error that may occur when certain sequences of actions are processed during an SSH login event on the affected device. An attacker could exploit this vulnerability by initiating an SSH session to the device with a specific sequence that presents the two usernames. A successful exploit could result in logging data misrepresentation, user enumeration, or, in certain circumstances, a command authorization bypass. See the Details section for more information. | |||||
| CVE-2019-15998 | 1 Cisco | 8 Asr 9001, Asr 9006, Asr 9010 and 5 more | 2020-10-16 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device. | |||||
| CVE-2019-1686 | 1 Cisco | 11 Asr 9000v, Asr 9001, Asr 9006 and 8 more | 2020-10-16 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later. | |||||
| CVE-2019-16019 | 1 Cisco | 20 Asr 9000, Asr 9010, Asr 9904 and 17 more | 2020-10-05 | 5.0 MEDIUM | 8.6 HIGH |
| Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2020-3530 | 1 Cisco | 23 Asr 9000v, Asr 9001, Asr 9006 and 20 more | 2020-09-09 | 5.6 MEDIUM | 8.4 HIGH |
| A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local attacker to execute that command, even though administrative privileges should be required. The attacker must have valid credentials on the affected device. The vulnerability is due to incorrect mapping in the source code of task group assignments for a specific command. An attacker could exploit this vulnerability by issuing the command, which they should not be authorized to issue, on an affected device. A successful exploit could allow the attacker to invalidate the integrity of the disk and cause the device to restart. This vulnerability could allow a user with read permissions to issue a specific command that should require Administrator privileges. | |||||
| CVE-2018-0136 | 1 Cisco | 9 Asr 9001, Asr 9006, Asr 9010 and 6 more | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the IPv6 subsystem of Cisco IOS XR Software Release 5.3.4 for the Cisco Aggregation Services Router (ASR) 9000 Series could allow an unauthenticated, remote attacker to trigger a reload of one or more Trident-based line cards, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect handling of IPv6 packets with a fragment header extension. An attacker could exploit this vulnerability by sending IPv6 packets designed to trigger the issue either to or through the Trident-based line card. A successful exploit could allow the attacker to trigger a reload of Trident-based line cards, resulting in a DoS during the period of time the line card takes to restart. This vulnerability affects Cisco Aggregation Services Router (ASR) 9000 Series when the following conditions are met: The router is running Cisco IOS XR Software Release 5.3.4, and the router has installed Trident-based line cards that have IPv6 configured. A software maintenance upgrade (SMU) has been made available that addresses this vulnerability. The fix has also been incorporated into service pack 7 for Cisco IOS XR Software Release 5.3.4. Cisco Bug IDs: CSCvg46800. | |||||
| CVE-2018-0418 | 1 Cisco | 11 Asr 9000v, Asr 9001, Asr 9006 and 8 more | 2020-08-31 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Local Packet Transport Services (LPTS) feature set of Cisco ASR 9000 Series Aggregation Services Router Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input and validation checking on certain Precision Time Protocol (PTP) ingress traffic to an affected device. An attacker could exploit this vulnerability by injecting malformed traffic into an affected device. A successful exploit could allow the attacker to cause services on the device to become unresponsive, resulting in a DoS condition. Cisco Bug IDs: CSCvj22858. | |||||
| CVE-2020-3120 | 1 Cisco | 143 Asr 9000v, Asr 9001, Asr 9006 and 140 more | 2020-02-11 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2019-16018 | 1 Cisco | 28 Asr 9000v, Asr 9001, Asr 9006 and 25 more | 2020-02-03 | 4.3 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains crafted EVPN attributes. An attacker could indirectly exploit the vulnerability by sending BGP EVPN update messages with a specific, malformed attribute to an affected system and waiting for a user on the device to display the EVPN operational routes’ status. If successful, the attacker could cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2019-15989 | 1 Cisco | 28 Asr 9000v, Asr 9001, Asr 9006 and 25 more | 2020-01-29 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the implementation of the Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains a specific BGP attribute. An attacker could exploit this vulnerability by sending BGP update messages that include a specific, malformed attribute to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim’s BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2019-16022 | 1 Cisco | 28 Asr 9000v, Asr 9001, Asr 9006 and 25 more | 2020-01-29 | 5.0 MEDIUM | 8.6 HIGH |
| Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2019-16020 | 1 Cisco | 28 Asr 9000v, Asr 9001, Asr 9006 and 25 more | 2020-01-29 | 5.0 MEDIUM | 8.6 HIGH |
| Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2019-1846 | 1 Cisco | 11 Asr 9000v, Asr 9001, Asr 9006 and 8 more | 2019-10-09 | 6.1 MEDIUM | 7.4 HIGH |
| A vulnerability in the Multiprotocol Label Switching (MPLS) Operations, Administration, and Maintenance (OAM) implementation of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to the incorrect handling of certain MPLS OAM packets. An attacker could exploit this vulnerability by sending malicious MPLS OAM packets to an affected device. A successful exploit could allow the attacker to cause the lspv_server process to crash. The crash could lead to system instability and the inability to process or forward traffic though the device, resulting in a DoS condition that require manual intervention to restore normal operating conditions. | |||||
| CVE-2019-1909 | 1 Cisco | 10 Asr 9001, Asr 9006, Asr 9010 and 7 more | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
| A vulnerability in the implementation of Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect processing of certain BGP update messages. An attacker could exploit this vulnerability by sending BGP update messages that include a specific set of attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic from explicitly defined peers only. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2019-12709 | 1 Cisco | 11 Asr 9000v, Asr 9001, Asr 9006 and 8 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in a CLI command related to the virtualization manager (VMAN) in Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on an affected device. An attacker who has valid administrator access to an affected device could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to run arbitrary commands on the underlying operating system with root privileges, which may lead to complete system compromise. | |||||
| CVE-2018-15428 | 1 Cisco | 10 Asr 9001, Asr 9006, Asr 9010 and 7 more | 2019-10-09 | 4.3 MEDIUM | 6.8 MEDIUM |
| A vulnerability in the implementation of Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain BGP update messages. An attacker could exploit this vulnerability by sending BGP update messages that include a specific, malformed attribute to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2018-0167 | 2 Cisco, Rockwellautomation | 18 Asr 9001, Asr 9006, Asr 9010 and 15 more | 2019-10-09 | 8.3 HIGH | 8.8 HIGH |
| Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487. | |||||
| CVE-2018-0241 | 1 Cisco | 9 Asr 9001, Asr 9006, Asr 9010 and 6 more | 2019-10-09 | 6.1 MEDIUM | 7.4 HIGH |
| A vulnerability in the UDP broadcast forwarding function of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of UDP broadcast packets that are forwarded to an IPv4 helper address. An attacker could exploit this vulnerability by sending multiple UDP broadcast packets to the affected device. An exploit could allow the attacker to cause a buffer leak on the affected device, eventually resulting in a DoS condition requiring manual intervention to recover. This vulnerability affects all Cisco IOS XR platforms running 6.3.1, 6.2.3, or earlier releases of Cisco IOS XR Software when at least one IPv4 helper address is configured on an interface of the device. Cisco Bug IDs: CSCvi35625. | |||||
| CVE-2015-4284 | 1 Cisco | 7 Asr 9001, Asr 9006, Asr 9010 and 4 more | 2017-09-20 | 5.0 MEDIUM | N/A |
| The Concurrent Data Management Replication process in Cisco IOS XR 5.3.0 on ASR 9000 devices allows remote attackers to cause a denial of service (BGP process reload) via malformed BGPv4 packets, aka Bug ID CSCur70670. | |||||
| CVE-2014-3335 | 1 Cisco | 8 Asr 9000 Rsp440 Router, Asr 9001, Asr 9006 and 5 more | 2017-08-28 | 4.6 MEDIUM | N/A |
| Cisco IOS XR 4.3(.2) and earlier on ASR 9000 devices does not properly perform NetFlow sampling of packets with multicast destination MAC addresses, which allows remote attackers to cause a denial of service (chip and card hangs) via a crafted packet, aka Bug ID CSCup77750. | |||||