Total
22706 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-0026 | 1 Juniper | 1 Junos | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| After Junos OS device reboot or upgrade, the stateless firewall filter configuration may not take effect. This issue can be verified by running the command: user@re0> show interfaces <interface_name> extensive | match filters" CAM destination filters: 0, CAM source filters: 0 Note: when the issue occurs, it does not show the applied firewall filter. The correct output should show the applied firewall filter, for example: user@re0> show interfaces <interface_name> extensive | match filters" CAM destination filters: 0, CAM source filters: 0 Input Filters: FIREWAL_FILTER_NAME-<interface_name> This issue affects firewall filters for every address family. Affected releases are Juniper Networks Junos OS: 15.1R4, 15.1R5, 15.1R6 and SRs based on these MRs. 15.1X8 versions prior to 15.1X8.3. | |||||
| CVE-2018-0035 | 1 Juniper | 3 Junos, Qfx10002, Qfx5200 | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| QFX5200 and QFX10002 devices that have been shipped with Junos OS 15.1X53-D21, 15.1X53-D30, 15.1X53-D31, 15.1X53-D32, 15.1X53-D33 and 15.1X53-D60 or have been upgraded to these releases using the .bin or .iso images may contain an unintended additional Open Network Install Environment (ONIE) partition. This additional partition allows the superuser to reboot to the ONIE partition which will wipe out the content of the Junos partition and its configuration. Once rebooted, the ONIE partition will not have root password configured, thus any user can access the console or SSH, using an IP address acquired from DHCP, as root without password. Once the device has been shipped or upgraded with the ONIE partition installed, the issue will persist. Simply upgrading to higher release via the CLI will not resolve the issue. No other Juniper Networks products or platforms are affected by this issue. | |||||
| CVE-2018-0025 | 1 Juniper | 21 Junos, Srx100, Srx110 and 18 more | 2019-10-09 | 4.3 MEDIUM | 8.1 HIGH |
| When an SRX Series device is configured to use HTTP/HTTPS pass-through authentication services, a client sending authentication credentials in the initial HTTP/HTTPS session is at risk that these credentials may be captured during follow-on HTTP/HTTPS requests by a malicious actor through a man-in-the-middle attack or by authentic servers subverted by malicious actors. FTP, and Telnet pass-through authentication services are not affected. Affected releases are Juniper Networks SRX Series: 12.1X46 versions prior to 12.1X46-D67 on SRX Series; 12.3X48 versions prior to 12.3X48-D25 on SRX Series; 15.1X49 versions prior to 15.1X49-D35 on SRX Series. | |||||
| CVE-2018-0284 | 1 Cisco | 12 Meraki Mr, Meraki Mr 24 Firmware, Meraki Mr 25 Firmware and 9 more | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the local status page functionality of the Cisco Meraki MR, MS, MX, Z1, and Z3 product lines could allow an authenticated, remote attacker to modify device configuration files. The vulnerability occurs when handling requests to the local status page. An exploit could allow the attacker to establish an interactive session to the device with elevated privileges. The attacker could then use the elevated privileges to further compromise the device or obtain additional configuration data from the device that is being exploited. | |||||
| CVE-2018-0290 | 1 Cisco | 1 Socialminer | 2019-10-09 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the TCP stack of Cisco SocialMiner could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition in the notification system. The vulnerability is due to faulty handling of new TCP connections to the affected application. An attacker could exploit this vulnerability by sending a malicious TCP packet to the vulnerable service. An exploit could allow the attacker to create a DoS condition by interrupting certain phone services. A manual restart of the service may be required to restore full functionalities. Cisco Bug IDs: CSCvh48368. | |||||
| CVE-2018-0294 | 1 Cisco | 74 Firepower 4110, Firepower 4120, Firepower 4140 and 71 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753. | |||||
| CVE-2018-0332 | 1 Cisco | 27 Ip Phone 7811, Ip Phone 7821, Ip Phone 7841 and 24 more | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Session Initiation Protocol (SIP) ingress packet processing of Cisco Unified IP Phone software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms in the software. An attacker could exploit this vulnerability by sending high volumes of SIP INVITE traffic to the targeted device. Successful exploitation could allow the attacker to cause a disruption of services on the targeted IP phone. Cisco Bug IDs: CSCve10064, CSCve14617, CSCve14638, CSCve14683, CSCve20812, CSCve20926, CSCve20945. | |||||
| CVE-2018-0180 | 1 Cisco | 13 1921, 1941, 1941w and 10 more | 2019-10-09 | 7.1 HIGH | 5.9 MEDIUM |
| Multiple vulnerabilities in the Login Enhancements (Login Block) feature of Cisco IOS Software could allow an unauthenticated, remote attacker to trigger a reload of an affected system, resulting in a denial of service (DoS) condition. These vulnerabilities affect Cisco devices that are running Cisco IOS Software Release 15.4(2)T, 15.4(3)M, or 15.4(2)CG and later. Cisco Bug IDs: CSCuy32360, CSCuz60599. | |||||
| CVE-2018-0012 | 1 Juniper | 1 Junos Space | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| Junos Space is affected by a privilege escalation vulnerability that may allow a local authenticated attacker to gain root privileges. | |||||
| CVE-2018-0009 | 1 Juniper | 21 Junos, Srx100, Srx110 and 18 more | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
| On Juniper Networks SRX series devices, firewall rules configured to match custom application UUIDs starting with zeros can match all TCP traffic. Due to this issue, traffic that should have been blocked by other rules is permitted to flow through the device resulting in a firewall bypass condition. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71 on SRX series; 12.3X48 versions prior to 12.3X48-D55 on SRX series; 15.1X49 versions prior to 15.1X49-D100 on SRX series. | |||||
| CVE-2017-9267 | 1 Novell | 1 Edirectory | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| In Novell eDirectory before 9.0.3.1 the LDAP interface was not strictly enforcing cipher restrictions allowing weaker ciphers to be used during SSL BIND operations. | |||||
| CVE-2017-9277 | 1 Novell | 1 Edirectory | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| The LDAP backend in Novell eDirectory before 9.0 SP4 when switched to EBA (Enhanced Background Authentication) kept open connections without EBA. | |||||
| CVE-2017-9941 | 1 Siemens | 1 Sipass Integrated | 2019-10-09 | 5.8 MEDIUM | 7.4 HIGH |
| A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker in a Man-in-the-Middle position between the SiPass integrated server and SiPass integrated clients to read or modify the network communication. | |||||
| CVE-2017-9286 | 1 Opensuse | 1 Leap | 2019-10-09 | 9.0 HIGH | 8.8 HIGH |
| The packaging of NextCloud in openSUSE used /srv/www/htdocs in an unsafe manner, which could have allowed scripts running as wwwrun user to escalate privileges to root during nextcloud package upgrade. | |||||
| CVE-2017-8444 | 1 Elasticsearch | 1 Cloud Enterprise | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
| The client-forwarder in Elastic Cloud Enterprise versions prior to 1.0.2 do not properly encrypt traffic to ZooKeeper. If an attacker is able to man in the middle (MITM) the traffic between the client-forwarder and ZooKeeper they could potentially obtain sensitive data. | |||||
| CVE-2017-9942 | 1 Siemens | 1 Sipass Integrated | 2019-10-09 | 2.1 LOW | 7.8 HIGH |
| A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker with local access to the SiPass integrated server or SiPass integrated client to potentially obtain credentials from the systems. | |||||
| CVE-2018-0021 | 1 Juniper | 1 Junos | 2019-10-09 | 3.3 LOW | 8.8 HIGH |
| If all 64 digits of the connectivity association name (CKN) key or all 32 digits of the connectivity association key (CAK) key are not configured, all remaining digits will be auto-configured to 0. Hence, Juniper devices configured with short MacSec keys are at risk to an increased likelihood that an attacker will discover the secret passphrases configured for these keys through dictionary-based and brute-force-based attacks using spoofed packets. Affected releases are Juniper Networks Junos OS: 14.1 versions prior to 14.1R10, 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D100; 15.1X53 versions prior to 15.1X53-D59; 16.1 versions prior to 16.1R3-S8, 16.1R4-S8, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2; 17.1 versions prior to 17.1R2. | |||||
| CVE-2018-0016 | 1 Juniper | 1 Junos | 2019-10-09 | 8.5 HIGH | 7.5 HIGH |
| Receipt of a specially crafted Connectionless Network Protocol (CLNP) datagram destined to an interface of a Junos OS device may result in a kernel crash or lead to remote code execution. Devices are only vulnerable to the specially crafted CLNP datagram if 'clns-routing' or ES-IS is explicitly configured. Devices with without CLNS enabled are not vulnerable to this issue. Devices with IS-IS configured on the interface are not vulnerable to this issue unless CLNS routing is also enabled. This issue only affects devices running Junos OS 15.1. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1F5-S3, 15.1F6-S8, 15.1F7, 15.1R5; 15.1X49 versions prior to 15.1X49-D60; 15.1X53 versions prior to 15.1X53-D66, 15.1X53-D233, 15.1X53-D471. Earlier releases are unaffected by this vulnerability, and the issue has been resolved in Junos OS 16.1R1 and all subsequent releases. | |||||
| CVE-2017-6869 | 1 Siemens | 1 Viewport For Web Office Portal | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability was discovered in Siemens ViewPort for Web Office Portal before revision number 1453 that could allow an unauthenticated remote user to upload arbitrary code and execute it with the permissions of the operating-system user running the web server by sending specially crafted network packets to port 443/TCP or port 80/TCP. | |||||
| CVE-2017-6866 | 1 Siemens | 1 Xhq Server | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability was discovered in Siemens XHQ server 4 and 5 (4 before V4.7.1.3 and 5 before V5.0.0.2) that could allow an authenticated low-privileged remote user to gain read access to data in the XHQ solution exceeding his configured permission level. | |||||