Total
1255 CVE
CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
---|---|---|---|---|---|
CVE-2018-0372 | 1 Cisco | 20 Nexus 92160yc-x, Nexus 92304qc, Nexus 9236c and 17 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
A vulnerability in the DHCPv6 feature of the Cisco Nexus 9000 Series Fabric Switches in Application-Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause the device to run low on system memory, which could result in a Denial of Service (DoS) condition on an affected system. The vulnerability is due to improper memory management when DHCPv6 packets are received on an interface of the targeted device. An attacker could exploit this vulnerability by sending a high number of malicious DHCPv6 packets to be processed by an affected device. A successful exploit could allow the attacker to cause the system to run low on memory, which could cause an eventual reboot of an affected device. The vulnerability only applies to IPv6 protocol packets and not for IPv4 protocol packets. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode running software version 13.0(1k). The vulnerability can only be exploited when unicast routing is enabled on the Bridge Domain (BD). DHCP and DHCP relay do not have to be configured for the vulnerability to be exploited. Cisco Bug IDs: CSCvg38918. | |||||
CVE-2018-0022 | 1 Juniper | 8 Ex2300, Ex3400, Junos and 5 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
A Junos device with VPLS routing-instances configured on one or more interfaces may be susceptible to an mbuf leak when processing a specific MPLS packet. Approximately 1 mbuf is leaked per each packet processed. The number of mbufs is platform dependent. The following command provides the number of mbufs that are currently in use and maximum number of mbufs that can be allocated on a platform: > show system buffers 2437/3143/5580 mbufs in use (current/cache/total) Once the device runs out of mbufs it will become inaccessible and a restart will be required. This issue only affects end devices, transit devices are not affected. Affected releases are Juniper Networks Junos OS with VPLS configured running: 12.1X46 versions prior to 12.1X46-D76; 12.3X48 versions prior to 12.3X48-D66, 12.3X48-D70; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F2-S19, 15.1F6-S10, 15.1R4-S9, 15.1R5-S7, 15.1R6-S4, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 15.1X53 versions prior to 15.1X53-D66 on QFX10; 16.1 versions prior to 16.1R3-S8, 16.1R4-S6, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S6, 17.1R3; 17.2 versions prior to 17.2R1-S5, 17.2R2. | |||||
CVE-2018-0004 | 1 Juniper | 1 Junos | 2019-10-09 | 7.1 HIGH | 6.5 MEDIUM |
A sustained sequence of different types of normal transit traffic can trigger a high CPU consumption denial of service condition in the Junos OS register and schedule software interrupt handler subsystem when a specific command is issued to the device. This affects one or more threads and conversely one or more running processes running on the system. Once this occurs, the high CPU event(s) affects either or both the forwarding and control plane. As a result of this condition the device can become inaccessible in either or both the control and forwarding plane and stops forwarding traffic until the device is rebooted. The issue will reoccur after reboot upon receiving further transit traffic. Score: 5.7 MEDIUM (CVSS:3.0/AV:A/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) For network designs utilizing layer 3 forwarding agents or other ARP through layer 3 technologies, the score is slightly higher. Score: 6.5 MEDIUM (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) If the following entry exists in the RE message logs then this may indicate the issue is present. This entry may or may not appear when this issue occurs. /kernel: Expensive timeout(9) function: Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D50; 12.3X48 versions prior to 12.3X48-D30; 12.3R versions prior to 12.3R12-S7; 14.1 versions prior to 14.1R8-S4, 14.1R9; 14.1X53 versions prior to 14.1X53-D30, 14.1X53-D34; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F6, 15.1R3; 15.1X49 versions prior to 15.1X49-D40; 15.1X53 versions prior to 15.1X53-D31, 15.1X53-D33, 15.1X53-D60. No other Juniper Networks products or platforms are affected by this issue. | |||||
CVE-2017-7935 | 1 Phoenix Contact Gmbh | 2 Mguard, Mguard Firmware | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
A Resource Exhaustion issue was discovered in Phoenix Contact GmbH mGuard firmware versions 8.3.0 to 8.4.2. An attacker may compromise the device's availability by performing multiple initial VPN requests. | |||||
CVE-2017-7651 | 2 Debian, Eclipse | 2 Debian Linux, Mosquitto | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
In Eclipse Mosquitto 1.4.14, a user can shutdown the Mosquitto server simply by filling the RAM memory with a lot of connections with large payload. This can be done without authentications if occur in connection phase of MQTT protocol. | |||||
CVE-2017-6779 | 1 Cisco | 13 Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment and 10 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
Multiple Cisco products are affected by a vulnerability in local file management for certain system log files of Cisco collaboration products that could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because a certain system log file does not have a maximum size restriction. Therefore, the file is allowed to consume the majority of available disk space on the appliance. An attacker could exploit this vulnerability by sending crafted remote connection requests to the appliance. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the application functions could operate abnormally, making the appliance unstable. This vulnerability affects the following Cisco Voice Operating System (VOS)-based products: Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment, MediaSense, Prime License Manager, SocialMiner, Unified Communications Manager (UCM), Unified Communications Manager IM and Presence Service (IM&P - earlier releases were known as Cisco Unified Presence), Unified Communication Manager Session Management Edition (SME), Unified Contact Center Express (UCCx), Unified Intelligence Center (UIC), Unity Connection, Virtualized Voice Browser. This vulnerability also affects Prime Collaboration Assurance and Prime Collaboration Provisioning. Cisco Bug IDs: CSCvd10872, CSCvf64322, CSCvf64332, CSCvi29538, CSCvi29543, CSCvi29544, CSCvi29546, CSCvi29556, CSCvi29571, CSCvi31738, CSCvi31741, CSCvi31762, CSCvi31807, CSCvi31818, CSCvi31823. | |||||
CVE-2017-6043 | 1 Trihedral | 1 Vtscada | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
A Resource Consumption issue was discovered in Trihedral VTScada Versions prior to 11.2.26. The client does not properly validate the input or limit the amount of resources that are utilized by an attacker, which can be used to consume more resources than are available. | |||||
CVE-2017-6632 | 1 Cisco | 1 Firepower Threat Defense | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072. | |||||
CVE-2017-3140 | 2 Isc, Netapp | 4 Bind, Data Ontap Edge, Element Software and 1 more | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
If named is configured to use Response Policy Zones (RPZ) an error processing some rule types can lead to a condition where BIND will endlessly loop while handling a query. Affects BIND 9.9.10, 9.10.5, 9.11.0->9.11.1, 9.9.10-S1, 9.10.5-S1. | |||||
CVE-2017-2348 | 1 Juniper | 1 Junos | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
The Juniper Enhanced jdhcpd daemon may experience high CPU utilization, or crash and restart upon receipt of an invalid IPv6 UDP packet. Both high CPU utilization and repeated crashes of the jdhcpd daemon can result in a denial of service as DHCP service is interrupted. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 14.1X53 prior to 14.1X53-D12, 14.1X53-D38, 14.1X53-D40 on QFX, EX, QFabric System; 15.1 prior to 15.1F2-S18, 15.1R4 on all products and platforms; 15.1X49 prior to 15.1X49-D80 on SRX; 15.1X53 prior to 15.1X53-D51, 15.1X53-D60 on NFX, QFX, EX. | |||||
CVE-2017-1794 | 1 Ibm | 1 Tivoli Monitoring | 2019-10-09 | 6.0 MEDIUM | 7.5 HIGH |
IBM Tivoli Monitoring 6.2.3 through 6.2.3.5 and 6.3.0 through 6.3.0.7 are vulnerable to both TEPS user privilege escalation and possible denial of service due to unconstrained memory growth. IBM X-Force ID: 137039. | |||||
CVE-2017-16099 | 1 No-case Project | 1 No-case | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
The no-case module is vulnerable to regular expression denial of service. When malicious untrusted user input is passed into no-case it can block the event loop causing a denial of service condition. | |||||
CVE-2017-16021 | 1 Uri-js Project | 1 Uri-js | 2019-10-09 | 6.8 MEDIUM | 6.5 MEDIUM |
uri-js is a module that tries to fully implement RFC 3986. One of these features is validating whether or not a supplied URL is valid or not. To do this, uri-js uses a regular expression, This regular expression is vulnerable to redos. This causes the program to hang and the CPU to idle at 100% usage while uri-js is trying to validate if the supplied URL is valid or not. To check if you're vulnerable, look for a call to `require("uri-js").parse()` where a user is able to send their own input. This affects uri-js 2.1.1 and earlier. | |||||
CVE-2017-15133 | 1 Miekg-dns Prject | 1 Miekg-dns | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
A denial of service flaw was found in miekg-dns before 1.0.4. A remote attacker could use carefully timed TCP packets to block the DNS server from accepting new connections. | |||||
CVE-2017-15119 | 4 Canonical, Debian, Qemu and 1 more | 4 Ubuntu Linux, Debian Linux, Qemu and 1 more | 2019-10-09 | 5.0 MEDIUM | 8.6 HIGH |
The Network Block Device (NBD) server in Quick Emulator (QEMU) before 2.11 is vulnerable to a denial of service issue. It could occur if a client sent large option requests, making the server waste CPU time on reading up to 4GB per request. A client could use this flaw to keep the NBD server from serving other requests, resulting in DoS. | |||||
CVE-2017-16086 | 1 Ua-parser Project | 1 Ua-parser | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
ua-parser is a port of Browserscope's user agent parser. ua-parser is vulnerable to a ReDoS (Regular Expression Denial of Service) attack when given a specially crafted UserAgent header. | |||||
CVE-2017-16098 | 1 Charset Project | 1 Charset | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
charset 1.0.0 and below are vulnerable to regular expression denial of service. Input of around 50k characters is required for a slow down of around 2 seconds. Unless node was compiled using the -DHTTP_MAX_HEADER_SIZE= option the default header max length is 80kb, so the impact of the ReDoS is relatively low. | |||||
CVE-2017-16111 | 1 Content Project | 1 Content | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
The content module is a module to parse HTTP Content-* headers. It is used by the hapijs framework to provide this functionality. The module is vulnerable to regular expression denial of service when passed a specifically crafted Content-Type or Content-Disposition header. | |||||
CVE-2017-16114 | 1 Marked Project | 1 Marked | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
The marked module is vulnerable to a regular expression denial of service. Based on the information published in the public issue, 1k characters can block for around 6 seconds. | |||||
CVE-2017-16116 | 1 String Project | 1 String | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
The string module is a module that provides extra string operations. The string module is vulnerable to regular expression denial of service when specifically crafted untrusted user input is passed into the underscore or unescapeHTML methods. |