Filtered by vendor Cisco
Subscribe
Filtered by product Adaptive Security Appliance Software
Subscribe
Total
231 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-0230 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2019-10-09 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. | |||||
| CVE-2018-0231 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2019-10-09 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446. | |||||
| CVE-2018-0229 | 1 Cisco | 2 Adaptive Security Appliance Software, Anyconnect Secure Mobility Client | 2019-10-09 | 4.3 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) Single Sign-On (SSO) authentication for Cisco AnyConnect Secure Mobility Client for Desktop Platforms, Cisco Adaptive Security Appliance (ASA) Software, and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. The authentication would need to be done by an unsuspecting third party, aka Session Fixation. The vulnerability exists because there is no mechanism for the ASA or FTD Software to detect that the authentication request originates from the AnyConnect client directly. An attacker could exploit this vulnerability by persuading a user to click a crafted link and authenticating using the company's Identity Provider (IdP). A successful exploit could allow the attacker to hijack a valid authentication token and use that to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. This vulnerability affects the Cisco AnyConnect Secure Mobility Client, and ASA Software and FTD Software configured for SAML 2.0-based SSO for AnyConnect Remote Access VPN that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvg65072, CSCvh87448. | |||||
| CVE-2018-0242 | 1 Cisco | 11 Adaptive Security Appliance Software, Asa 5506-x, Asa 5506h-x and 8 more | 2019-10-09 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the WebVPN web-based management interface of Cisco Adaptive Security Appliance could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvg33985. | |||||
| CVE-2018-0251 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-09 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the Web Server Authentication Required screen of the Clientless Secure Sockets Layer (SSL) VPN portal of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of that portal on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the portal or allow the attacker to access sensitive browser-based information. This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco ASA Software: 3000 Series Industrial Security Appliances, Adaptive Security Virtual Appliance (ASAv), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches, ASA Services Module for Cisco 7600 Series Routers. Cisco Bug IDs: CSCvh20742. | |||||
| CVE-2018-0101 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2019-10-09 | 10.0 HIGH | 10.0 CRITICAL |
| A vulnerability in the Secure Sockets Layer (SSL) VPN functionality of the Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to an attempt to double free a region of memory when the webvpn feature is enabled on the Cisco ASA device. An attacker could exploit this vulnerability by sending multiple, crafted XML packets to a webvpn-configured interface on the affected system. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system, or cause a reload of the affected device. This vulnerability affects Cisco ASA Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, Firepower Threat Defense Software (FTD). Cisco Bug IDs: CSCvg35618. | |||||
| CVE-2017-6752 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) 9.3(3) and 9.6(2) could allow an unauthenticated, remote attacker to determine valid usernames. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to the interaction between Lightweight Directory Access Protocol (LDAP) and SSL Connection Profile when they are configured together. An attacker could exploit the vulnerability by performing a username enumeration attack to the IP address of the device. An exploit could allow the attacker to determine valid usernames. Cisco Bug IDs: CSCvd47888. | |||||
| CVE-2017-6764 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-09 | 3.5 LOW | 5.4 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) 9.5(1) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvd82064. | |||||
| CVE-2017-12246 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-09 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. | |||||
| CVE-2017-6610 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-02 | 6.8 MEDIUM | 7.7 HIGH |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. | |||||
| CVE-2017-6607 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-02 | 5.8 MEDIUM | 8.7 HIGH |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. | |||||
| CVE-2017-6608 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-02 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. | |||||
| CVE-2017-6609 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-02 | 6.8 MEDIUM | 7.7 HIGH |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. | |||||
| CVE-2017-3793 | 1 Cisco | 1 Adaptive Security Appliance Software | 2019-10-02 | 4.3 MEDIUM | 4.0 MEDIUM |
| A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321. | |||||
| CVE-2017-3867 | 1 Cisco | 2 Adaptive Security Appliance, Adaptive Security Appliance Software | 2019-10-02 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8). | |||||
| CVE-2019-1697 | 1 Cisco | 14 Adaptive Security Appliance Software, Asa 5505, Asa 5510 and 11 more | 2019-05-07 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets sent to an affected device. An attacker could exploit these vulnerabilities by sending a crafted LDAP packet, using Basic Encoding Rules (BER), to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. | |||||
| CVE-2019-1687 | 1 Cisco | 14 Adaptive Security Appliance Software, Asa 5505, Asa 5510 and 11 more | 2019-05-07 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the TCP proxy functionality for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to an error in TCP-based packet inspection, which could cause the TCP packet to have an invalid Layer 2 (L2)-formatted header. An attacker could exploit this vulnerability by sending a crafted TCP packet sequence to the targeted device. A successful exploit could allow the attacker to cause a DoS condition. | |||||
| CVE-2010-0440 | 1 Cisco | 3 Adaptive Security Appliance Software, Asa 5500, Secure Desktop | 2018-11-15 | 4.3 MEDIUM | N/A |
| Cross-site scripting (XSS) vulnerability in +CSCOT+/translation in Cisco Secure Desktop 3.4.2048, and other versions before 3.5; as used in Cisco ASA appliance before 8.2(1), 8.1(2.7), and 8.0(5); allows remote attackers to inject arbitrary web script or HTML via a crafted POST parameter, which is not properly handled by an eval statement in binary/mainv.js that writes to start.html. | |||||
| CVE-2017-3807 | 1 Cisco | 1 Adaptive Security Appliance Software | 2018-10-30 | 8.0 HIGH | 8.8 HIGH |
| A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838. | |||||
| CVE-2016-6461 | 1 Cisco | 1 Adaptive Security Appliance Software | 2018-10-30 | 4.3 MEDIUM | 5.9 MEDIUM |
| A vulnerability in the HTTP web-based management interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to inject arbitrary XML commands on the affected system. More Information: CSCva38556. Known Affected Releases: 9.1(6.10). Known Fixed Releases: 100.11(0.75) 100.15(0.137) 100.8(40.129) 96.2(0.95) 97.1(0.55) 97.1(12.7) 97.1(6.30). | |||||