Total
28 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-28242 | 3 Asterisk, Debian, Fedoraproject | 4 Certified Asterisk, Open Source, Debian Linux and 1 more | 2022-06-04 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered in Asterisk Open Source 13.x before 13.37.1, 16.x before 16.14.1, 17.x before 17.8.1, and 18.x before 18.0.1 and Certified Asterisk before 16.8-cert5. If Asterisk is challenged on an outbound INVITE and the nonce is changed in each response, Asterisk will continually send INVITEs in a loop. This causes Asterisk to consume more and more memory since the transaction will never terminate (even if the call is hung up), ultimately leading to a restart or shutdown of Asterisk. Outbound authentication must be configured on the endpoint for this to occur. | |||||
| CVE-2020-28327 | 2 Asterisk, Digium | 2 Open Source, Certified Asterisk | 2020-11-20 | 2.1 LOW | 5.3 MEDIUM |
| A res_pjsip_session crash was discovered in Asterisk Open Source 13.x before 13.37.1, 16.x before 16.14.1, 17.x before 17.8.1, and 18.x before 18.0.1. and Certified Asterisk before 16.8-cert5. Upon receiving a new SIP Invite, Asterisk did not return the created dialog locked or referenced. This caused a gap between the creation of the dialog object, and its next use by the thread that created it. Depending on some off-nominal circumstances and timing, it was possible for another thread to free said dialog in this gap. Asterisk could then crash when the dialog object, or any of its dependent objects, were dereferenced or accessed next by the initial-creation thread. Note, however, that this crash can only occur when using a connection-oriented protocol (e.g., TCP or TLS, but not UDP) for SIP transport. Also, the remote client must be authenticated, or Asterisk must be configured for anonymous calling. | |||||
| CVE-2009-3723 | 2 Asterisk, Debian | 2 Open Source, Debian Linux | 2019-11-01 | 5.0 MEDIUM | 7.5 HIGH |
| asterisk allows calls on prohibited networks | |||||
| CVE-2018-12228 | 1 Asterisk | 1 Open Source | 2019-10-02 | 6.8 MEDIUM | 6.5 MEDIUM |
| An issue was discovered in Asterisk Open Source 15.x before 15.4.1. When connected to Asterisk via TCP/TLS, if the client abruptly disconnects, or sends a specially crafted message, then Asterisk gets caught in an infinite loop while trying to read the data stream. This renders the system unusable. | |||||
| CVE-2017-9358 | 1 Asterisk | 2 Certified Asterisk, Open Source | 2019-10-02 | 5.0 MEDIUM | 7.5 HIGH |
| A memory exhaustion vulnerability exists in Asterisk Open Source 13.x before 13.15.1 and 14.x before 14.4.1 and Certified Asterisk 13.13 before 13.13-cert4, which can be triggered by sending specially crafted SCCP packets causing an infinite loop and leading to memory exhaustion (by message logging in that loop). | |||||
| CVE-2008-0095 | 1 Asterisk | 5 Asterisk Appliance Developer Kit, Asterisk Business Edition, Asterisknow and 2 more | 2018-10-15 | 5.0 MEDIUM | N/A |
| The SIP channel driver in Asterisk Open Source 1.4.x before 1.4.17, Business Edition before C.1.0-beta8, AsteriskNOW before beta7, Appliance Developer Kit before Asterisk 1.4 revision 95946, and Appliance s800i 1.0.x before 1.0.3.4 allows remote attackers to cause a denial of service (daemon crash) via a BYE message with an Also (Also transfer) header, which triggers a NULL pointer dereference. | |||||
| CVE-2007-6430 | 1 Asterisk | 2 Asterisk Business Edition, Open Source | 2018-10-15 | 4.3 MEDIUM | N/A |
| Asterisk Open Source 1.2.x before 1.2.26 and 1.4.x before 1.4.16, and Business Edition B.x.x before B.2.3.6 and C.x.x before C.1.0-beta8, when using database-based registrations ("realtime") and host-based authentication, does not check the IP address when the username is correct and there is no password, which allows remote attackers to bypass authentication using a valid username. | |||||
| CVE-2009-0041 | 1 Asterisk | 3 Asterisk Business Edition, Open Source, S800i Appliance | 2018-10-11 | 5.0 MEDIUM | N/A |
| IAX2 in Asterisk Open Source 1.2.x before 1.2.31, 1.4.x before 1.4.23-rc4, and 1.6.x before 1.6.0.3-rc2; Business Edition A.x.x, B.x.x before B.2.5.7, C.1.x.x before C.1.10.4, and C.2.x.x before C.2.1.2.1; and s800i 1.2.x before 1.3.0 responds differently to a failed login attempt depending on whether the user account exists, which allows remote attackers to enumerate valid usernames. | |||||
| CVE-2008-5558 | 1 Asterisk | 2 Asterisk Business Edition, Open Source | 2018-10-11 | 4.3 MEDIUM | N/A |
| Asterisk Open Source 1.2.26 through 1.2.30.3 and Business Edition B.2.3.5 through B.2.5.5, when realtime IAX2 users are enabled, allows remote attackers to cause a denial of service (crash) via authentication attempts involving (1) an unknown user or (2) a user using hostname matching. | |||||
| CVE-2008-3264 | 1 Asterisk | 5 Asterisk Appliance Developer Kit, Asterisk Business Edition, Asterisknow and 2 more | 2018-10-11 | 7.8 HIGH | N/A |
| The FWDOWNL firmware-download implementation in Asterisk Open Source 1.0.x, 1.2.x before 1.2.30, and 1.4.x before 1.4.21.2; Business Edition A.x.x, B.x.x before B.2.5.4, and C.x.x before C.1.10.3; AsteriskNOW; Appliance Developer Kit 0.x.x; and s800i 1.0.x before 1.2.0.1 allows remote attackers to cause a denial of service (traffic amplification) via an IAX2 FWDOWNL request. | |||||
| CVE-2008-2119 | 1 Asterisk | 2 Asterisk Business Edition, Open Source | 2018-10-11 | 4.3 MEDIUM | N/A |
| Asterisk Open Source 1.0.x and 1.2.x before 1.2.29 and Business Edition A.x.x and B.x.x before B.2.5.3, when pedantic parsing (aka pedanticsipchecking) is enabled, allows remote attackers to cause a denial of service (daemon crash) via a SIP INVITE message that lacks a From header, related to invocations of the ast_uri_decode function, and improper handling of (1) an empty const string and (2) a NULL pointer. | |||||
| CVE-2008-1897 | 1 Asterisk | 5 Asterisk Appliance Developer Kit, Asterisk Business Edition, Asterisknow and 2 more | 2018-10-11 | 4.3 MEDIUM | N/A |
| The IAX2 channel driver (chan_iax2) in Asterisk Open Source 1.0.x, 1.2.x before 1.2.28, and 1.4.x before 1.4.19.1; Business Edition A.x.x, B.x.x before B.2.5.2, and C.x.x before C.1.8.1; AsteriskNOW before 1.0.3; Appliance Developer Kit 0.x.x; and s800i before 1.1.0.3, when configured to allow unauthenticated calls, does not verify that an ACK response contains a call number matching the server's reply to a NEW message, which allows remote attackers to cause a denial of service (traffic amplification) via a spoofed ACK response that does not complete a 3-way handshake. NOTE: this issue exists because of an incomplete fix for CVE-2008-1923. | |||||
| CVE-2008-1289 | 1 Asterisk | 5 Asterisk Appliance Developer Kit, Asterisk Business Edition, Asterisknow and 2 more | 2018-10-11 | 7.5 HIGH | N/A |
| Multiple buffer overflows in Asterisk Open Source 1.4.x before 1.4.18.1 and 1.4.19-rc3, Open Source 1.6.x before 1.6.0-beta6, Business Edition C.x.x before C.1.6.1, AsteriskNOW 1.0.x before 1.0.2, Appliance Developer Kit before 1.4 revision 109386, and s800i 1.1.x before 1.1.0.2 allow remote attackers to (1) write a zero to an arbitrary memory location via a large RTP payload number, related to the ast_rtp_unset_m_type function in main/rtp.c; or (2) write certain integers to an arbitrary memory location via a large number of RTP payloads, related to the process_sdp function in channels/chan_sip.c. | |||||
| CVE-2008-1333 | 1 Asterisk | 1 Open Source | 2018-10-11 | 5.8 MEDIUM | N/A |
| Format string vulnerability in Asterisk Open Source 1.6.x before 1.6.0-beta6 might allow remote attackers to execute arbitrary code via logging messages that are not properly handled by (1) the ast_verbose logging API call, or (2) the astman_append function. | |||||
| CVE-2008-1332 | 1 Asterisk | 6 Asterisk, Asterisk Appliance Developer Kit, Asterisk Business Edition and 3 more | 2018-10-11 | 8.8 HIGH | N/A |
| Unspecified vulnerability in Asterisk Open Source 1.2.x before 1.2.27, 1.4.x before 1.4.18.1 and 1.4.19-rc3; Business Edition A.x.x, B.x.x before B.2.5.1, and C.x.x before C.1.6.2; AsteriskNOW 1.0.x before 1.0.2; Appliance Developer Kit before 1.4 revision 109393; and s800i 1.0.x before 1.1.0.2; allows remote attackers to access the SIP channel driver via a crafted From header. | |||||
| CVE-2009-2726 | 1 Asterisk | 4 Appliance S800i, Business Edition, Open Source and 1 more | 2018-10-10 | 7.8 HIGH | N/A |
| The SIP channel driver in Asterisk Open Source 1.2.x before 1.2.34, 1.4.x before 1.4.26.1, 1.6.0.x before 1.6.0.12, and 1.6.1.x before 1.6.1.4; Asterisk Business Edition A.x.x, B.x.x before B.2.5.9, C.2.x before C.2.4.1, and C.3.x before C.3.1; and Asterisk Appliance s800i 1.2.x before 1.3.0.3 does not use a maximum width when invoking sscanf style functions, which allows remote attackers to cause a denial of service (stack memory consumption) via SIP packets containing large sequences of ASCII decimal characters, as demonstrated via vectors related to (1) the CSeq value in a SIP header, (2) large Content-Length value, and (3) SDP. | |||||
| CVE-2009-2346 | 1 Asterisk | 4 Appliance S800i, Asterisk, Open Source and 1 more | 2018-10-10 | 7.8 HIGH | N/A |
| The IAX2 protocol implementation in Asterisk Open Source 1.2.x before 1.2.35, 1.4.x before 1.4.26.2, 1.6.0.x before 1.6.0.15, and 1.6.1.x before 1.6.1.6; Business Edition B.x.x before B.2.5.10, C.2.x before C.2.4.3, and C.3.x before C.3.1.1; and s800i 1.3.x before 1.3.0.3 allows remote attackers to cause a denial of service (call-number exhaustion) by initiating many IAX2 message exchanges, a related issue to CVE-2008-3263. | |||||
| CVE-2011-4063 | 1 Asterisk | 1 Open Source | 2018-10-09 | 6.8 MEDIUM | N/A |
| chan_sip.c in the SIP channel driver in Asterisk Open Source 1.8.x before 1.8.7.1 and 10.x before 10.0.0-rc1 does not properly initialize variables during request parsing, which allows remote authenticated users to cause a denial of service (daemon crash) via a malformed request. | |||||
| CVE-2012-2414 | 1 Asterisk | 1 Open Source | 2017-12-13 | 6.5 MEDIUM | N/A |
| main/manager.c in the Manager Interface in Asterisk Open Source 1.6.2.x before 1.6.2.24, 1.8.x before 1.8.11.1, and 10.x before 10.3.1 and Asterisk Business Edition C.3.x before C.3.7.4 does not properly enforce System class authorization requirements, which allows remote authenticated users to execute arbitrary commands via (1) the originate action in the MixMonitor application, (2) the SHELL and EVAL functions in the GetVar manager action, or (3) the SHELL and EVAL functions in the Status manager action. | |||||
| CVE-2012-2415 | 1 Asterisk | 1 Open Source | 2017-12-13 | 6.5 MEDIUM | N/A |
| Heap-based buffer overflow in chan_skinny.c in the Skinny channel driver in Asterisk Open Source 1.6.2.x before 1.6.2.24, 1.8.x before 1.8.11.1, and 10.x before 10.3.1 allows remote authenticated users to cause a denial of service or possibly have unspecified other impact via a series of KEYPAD_BUTTON_MESSAGE events. | |||||