Total
53 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-9213 | 1 Huawei | 16 Ngfw Module, Ngfw Module Firmware, Nip6300 and 13 more | 2022-07-12 | 5.0 MEDIUM | 7.5 HIGH |
| There is a denial of service vulnerability in some huawei products. In specific scenarios, due to the improper handling of the packets, an attacker may craft many specific packets. Successful exploit may cause some services to be abnormal. Affected products include some versions of NGFW Module, NIP6300, NIP6600, NIP6800, Secospace USG6300, Secospace USG6500, Secospace USG6600 and SG9500. | |||||
| CVE-2020-1881 | 1 Huawei | 8 Nip6800, Nip6800 Firmware, Oceanstor 5310 and 5 more | 2022-04-22 | 5.0 MEDIUM | 7.5 HIGH |
| NIP6800;Secospace USG6600;USG9500 products with versions of V500R001C30; V500R001C60SPC500; V500R005C00SPC100 have have a resource management error vulnerability. An attacker needs to perform specific operations to trigger a function of the affected device. Due to improper resource management of the function, the vulnerability can be exploited to cause service abnormal on affected devices. | |||||
| CVE-2019-19415 | 1 Huawei | 100 Ar120-s, Ar120-s Firmware, Ar1200 and 97 more | 2021-07-21 | 5.0 MEDIUM | 7.5 HIGH |
| The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en. | |||||
| CVE-2020-1816 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2021-07-21 | 4.3 MEDIUM | 7.5 HIGH |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a Denial of Service (DoS) vulnerability. Due to improper processing of specific IPSEC packets, remote attackers can send constructed IPSEC packets to affected devices to exploit this vulnerability. Successful exploit could cause the IPSec function of the affected device abnormal. | |||||
| CVE-2020-1860 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2021-07-21 | 5.0 MEDIUM | 7.5 HIGH |
| NIP6800;Secospace USG6600;USG9500 products with versions of V500R001C30; V500R001C60SPC500; V500R005C00SPC100 have an access control bypass vulnerability. Attackers that can access to the internal network can exploit this vulnerability with careful deployment. Successful exploit may cause the access control to be bypassed, and attackers can directly access the Internet. | |||||
| CVE-2020-1828 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2021-07-21 | 5.0 MEDIUM | 7.5 HIGH |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have an input validation vulnerability where the IPSec module does not validate a field in a specific message. Attackers can send specific message to cause out-of-bound read, compromising normal service. | |||||
| CVE-2020-1815 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2021-07-21 | 4.3 MEDIUM | 7.5 HIGH |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a memory leak vulnerability. The software does not sufficiently track and release allocated memory while parse certain message, the attacker sends the message continuously that could consume remaining memory. Successful exploit could cause memory exhaust. | |||||
| CVE-2020-1857 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2021-07-21 | 2.1 LOW | 5.5 MEDIUM |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have an information leakage vulnerability. Due to improper processing of some data, a local authenticated attacker can exploit this vulnerability through a series of operations. Successful exploitation may cause information leakage. | |||||
| CVE-2019-19416 | 1 Huawei | 100 Ar120-s, Ar120-s Firmware, Ar1200 and 97 more | 2021-07-21 | 5.0 MEDIUM | 7.5 HIGH |
| The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en. | |||||
| CVE-2020-1814 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2021-07-21 | 3.5 LOW | 5.3 MEDIUM |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a Dangling pointer dereference vulnerability. An authenticated attacker may do some special operations in the affected products in some special scenarios to exploit the vulnerability. Due to improper race conditions of different operations, successful exploit will lead to Dangling pointer dereference, causing some service abnormal. | |||||
| CVE-2019-19417 | 1 Huawei | 100 Ar120-s, Ar120-s Firmware, Ar1200 and 97 more | 2021-07-21 | 5.0 MEDIUM | 7.5 HIGH |
| The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en. | |||||
| CVE-2020-1883 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2021-07-21 | 4.0 MEDIUM | 4.9 MEDIUM |
| Huawei products NIP6800;Secospace USG6600;USG9500 have a memory leak vulnerability. An attacker with high privileges exploits this vulnerability by continuously performing specific operations. Successful exploitation of this vulnerability can cause service abnormal. | |||||
| CVE-2021-22312 | 1 Huawei | 24 Ips6000e, Ips6000e Firmware, Ips Module and 21 more | 2021-04-20 | 4.0 MEDIUM | 6.5 MEDIUM |
| There is a memory leak vulnerability in some Huawei products. An authenticated remote attacker may exploit this vulnerability by sending specific message to the affected product. Due to not release the allocated memory properly, successful exploit may cause some service abnormal. Affected product include some versions of IPS Module, NGFW Module, Secospace USG6300, Secospace USG6500, Secospace USG6600 and USG9500. | |||||
| CVE-2021-22320 | 1 Huawei | 14 Ips Module, Ips Module Firmware, Ngfw Module and 11 more | 2021-03-26 | 5.0 MEDIUM | 7.5 HIGH |
| There is a denial of service vulnerability in Huawei products. A module cannot deal with specific messages correctly. Attackers can exploit this vulnerability by sending malicious messages to an affected module. This can lead to denial of service. Affected product include some versions of IPS Module, NGFW Module, NIP6600, NIP6800, Secospace USG6300, Secospace USG6500 and Secospace USG6600. | |||||
| CVE-2021-22321 | 1 Huawei | 28 Nip6300, Nip6300 Firmware, Nip6600 and 25 more | 2021-03-24 | 5.0 MEDIUM | 5.3 MEDIUM |
| There is a use-after-free vulnerability in a Huawei product. A module cannot deal with specific operations in special scenarios. Attackers can exploit this vulnerability by performing malicious operations. This can cause memory use-after-free, compromising normal service. Affected product include some versions of NIP6300, NIP6600, NIP6800, S1700, S2700, S5700, S6700 , S7700, S9700, Secospace USG6300, Secospace USG6500, Secospace USG6600 and USG9500. | |||||
| CVE-2020-1866 | 1 Huawei | 18 Nip6800, Nip6800 Firmware, S12700 and 15 more | 2021-01-19 | 3.3 LOW | 6.5 MEDIUM |
| There is an out-of-bounds read vulnerability in several products. The software reads data past the end of the intended buffer when parsing certain crafted DHCP messages. Successful exploit could cause certain service abnormal. Affected product versions include:NIP6800 versions V500R001C30,V500R001C60SPC500,V500R005C00;S12700 versions V200R008C00;S2700 versions V200R008C00;S5700 versions V200R008C00;S6700 versions V200R008C00;S7700 versions V200R008C00;S9700 versions V200R008C00;Secospace USG6600 versions V500R001C30SPC200,V500R001C30SPC600,V500R001C60SPC500,V500R005C00;USG9500 versions V500R001C30SPC300,V500R001C30SPC600,V500R001C60SPC500,V500R005C00. | |||||
| CVE-2020-9201 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2020-12-28 | 3.3 LOW | 6.5 MEDIUM |
| There is an out-of-bounds read vulnerability in some versions of NIP6800, Secospace USG6600 and USG9500. The software reads data past the end of the intended buffer when parsing DHCP messages including crafted parameter. Successful exploit could cause certain service abnormal. | |||||
| CVE-2019-5256 | 1 Huawei | 34 Ap2000, Ap2000 Firmware, Espace U1981 and 31 more | 2020-08-24 | 2.1 LOW | 5.5 MEDIUM |
| Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace AntiDDoS8000;Secospace USG6300;Secospace USG6500;Secospace USG6600;USG6000V;eSpace U1981) have a null pointer dereference vulnerability. The system dereferences a pointer that it expects to be valid, but is NULL. A local attacker could exploit this vulnerability by sending crafted parameters. A successful exploit could cause a denial of service and the process reboot. | |||||
| CVE-2019-5255 | 1 Huawei | 34 Ap2000, Ap2000 Firmware, Espace U1981 and 31 more | 2020-08-24 | 2.1 LOW | 5.5 MEDIUM |
| Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace AntiDDoS8000;Secospace USG6300;Secospace USG6500;Secospace USG6600;USG6000V;eSpace U1981) have a DoS vulnerability. An attacker may send crafted messages from a FTP client to exploit this vulnerability. Due to insufficient validation of the message, successful exploit may cause the system out-of-bounds read and result in a denial of service condition of the affected service. | |||||
| CVE-2020-9099 | 1 Huawei | 18 Ips Module, Ips Module Firmware, Ngfw Module and 15 more | 2020-06-11 | 7.5 HIGH | 9.8 CRITICAL |
| Huawei products IPS Module; NGFW Module; NIP6300; NIP6600; NIP6800; Secospace USG6300; Secospace USG6500; Secospace USG6600; USG9500 with versions of V500R001C00; V500R001C20; V500R001C30; V500R001C50; V500R001C60; V500R001C80; V500R005C00; V500R005C10; V500R005C20; V500R002C00; V500R002C10; V500R002C20; V500R002C30 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device. | |||||