Total
11 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-34714 | 1 Cisco | 225 Firepower 4100, Firepower 4110, Firepower 4112 and 222 more | 2022-10-27 | 5.7 MEDIUM | 7.4 HIGH |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process. | |||||
| CVE-2022-20824 | 1 Cisco | 288 Mds 9506, Mds 9506 Firmware, Mds 9513 and 285 more | 2022-09-30 | N/A | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation of specific values that are within a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, which would cause the affected device to reload, resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2022-20823 | 1 Cisco | 294 Nexus 3016, Nexus 3016 Firmware, Nexus 3016q and 291 more | 2022-09-01 | N/A | 8.6 HIGH |
| A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory. | |||||
| CVE-2019-1732 | 1 Cisco | 18 Nexus 3000, Nexus 3100, Nexus 3100-z and 15 more | 2021-11-03 | 6.9 MEDIUM | 6.4 MEDIUM |
| A vulnerability in the Remote Package Manager (RPM) subsystem of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to leverage a time-of-check, time-of-use (TOCTOU) race condition to corrupt local variables, which could lead to arbitrary command injection. The vulnerability is due to the lack of a proper locking mechanism on critical variables that need to stay static until used. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a set of RPM-related CLI commands. A successful exploit could allow the attacker to perform arbitrary command injection. The attacker would need administrator credentials for the targeted device. | |||||
| CVE-2021-1227 | 1 Cisco | 46 Mds 9148s, Mds 9250i, Mds 9706 and 43 more | 2021-03-03 | 5.8 MEDIUM | 8.1 HIGH |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. This vulnerability is due to insufficient CSRF protections for the NX-API on an affected device. An attacker could exploit this vulnerability by persuading a user of the NX-API to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. The attacker could view and modify the device configuration. Note: The NX-API feature is disabled by default. | |||||
| CVE-2019-1727 | 1 Cisco | 27 Mds 9000, Mds 9100, Mds 9200 and 24 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and issue arbitrary commands to elevate the attacker's privilege level. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions in the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands to elevate the attacker's privilege level. To exploit this vulnerability, the attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. | |||||
| CVE-2019-1836 | 1 Cisco | 3 Nexus 9300, Nexus 9500, Nx-os | 2020-10-13 | 6.6 MEDIUM | 7.1 HIGH |
| A vulnerability in the system shell for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to use symbolic links to overwrite system files. These system files may be sensitive and should not be overwritable by non-root users. The attacker would need valid device credentials. The vulnerability is due to incorrect symbolic link verification of directory paths when they are used in the system shell. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input to specific symbolic link CLI commands. Successful exploitation could allow the attacker to overwrite system files that should be restricted. This vulnerability has been fixed in software version 14.1(1i). | |||||
| CVE-2019-1729 | 1 Cisco | 20 Nexus 3000, Nexus 3100, Nexus 3100-z and 17 more | 2020-10-09 | 6.6 MEDIUM | 6.0 MEDIUM |
| A vulnerability in the CLI implementation of a specific command used for image maintenance for Cisco NX-OS Software could allow an authenticated, local attacker to overwrite any file on the file system including system files. These file overwrites by the attacker are accomplished at the root privilege level. The vulnerability occurs because there is no verification of user-input parameters and or digital-signature verification for image files when using a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device and issuing a command at the CLI. Because an exploit could allow the attacker to overwrite any file on the disk, including system files, a denial of service (DoS) condition could occur. The attacker must have valid administrator credentials for the affected device to exploit this vulnerability. | |||||
| CVE-2019-1726 | 1 Cisco | 29 Mds 9000, Mds 9100, Mds 9200 and 26 more | 2020-10-09 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to access internal services that should be restricted on an affected device, such as the NX-API. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument to the affected command. A successful exploit could allow the attacker to bypass intended restrictions and access internal services of the device. An attacker would need valid device credentials to exploit this vulnerability. | |||||
| CVE-2019-1733 | 1 Cisco | 17 Nexus 3000, Nexus 3100, Nexus 3100-z and 14 more | 2019-10-09 | 3.5 LOW | 5.4 MEDIUM |
| A vulnerability in the NX API (NX-API) Sandbox interface for Cisco NX-OS Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the NX-API Sandbox interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the NX-API Sandbox interface. An attacker could exploit this vulnerability by persuading a user of the NX-API Sandbox interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected NX-API Sandbox interface. | |||||
| CVE-2019-1728 | 1 Cisco | 40 Firepower 4110, Firepower 4115, Firepower 4120 and 37 more | 2019-05-21 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the Secure Configuration Validation functionality of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to run arbitrary commands at system boot time with the privileges of root. The vulnerability is due to a lack of proper validation of system files when the persistent configuration information is read from the file system. An attacker could exploit this vulnerability by authenticating to the device and overwriting the persistent configuration storage with malicious executable files. An exploit could allow the attacker to run arbitrary commands at system startup and those commands will run as the root user. The attacker must have valid administrative credentials for the device. | |||||