Total
21 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-20064 | 1 Cisco | 40 Asr 9000v-v2, Asr 9001, Asr 9006 and 37 more | 2023-03-16 | N/A | 4.6 MEDIUM |
| A vulnerability in the GRand Unified Bootloader (GRUB) for Cisco IOS XR Software could allow an unauthenticated attacker with physical access to the device to view sensitive files on the console using the GRUB bootloader command line. This vulnerability is due to the inclusion of unnecessary commands within the GRUB environment that allow sensitive files to be viewed. An attacker could exploit this vulnerability by being connected to the console port of the Cisco IOS XR device when the device is power-cycled. A successful exploit could allow the attacker to view sensitive files that could be used to conduct additional attacks against the device. | |||||
| CVE-2021-34720 | 1 Cisco | 46 8101-32fh, 8101-32h, 8102-64h and 43 more | 2022-10-25 | 4.3 MEDIUM | 8.6 HIGH |
| A vulnerability in the IP Service Level Agreements (IP SLA) responder and Two-Way Active Measurement Protocol (TWAMP) features of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause device packet memory to become exhausted or cause the IP SLA process to crash, resulting in a denial of service (DoS) condition. This vulnerability exists because socket creation failures are mishandled during the IP SLA and TWAMP processes. An attacker could exploit this vulnerability by sending specific IP SLA or TWAMP packets to an affected device. A successful exploit could allow the attacker to exhaust the packet memory, which will impact other processes, such as routing protocols, or crash the IP SLA process. | |||||
| CVE-2020-3569 | 1 Cisco | 29 8201, 8202, 8808 and 26 more | 2022-09-20 | 5.0 MEDIUM | 7.5 HIGH |
| Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities. | |||||
| CVE-2021-1389 | 1 Cisco | 12 Ios Xr, Ncs 540, Ncs 5501 and 9 more | 2022-09-20 | 6.4 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the IPv6 traffic processing of Cisco IOS XR Software and Cisco NX-OS Software for certain Cisco devices could allow an unauthenticated, remote attacker to bypass an IPv6 access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to improper processing of IPv6 traffic that is sent through an affected device. An attacker could exploit this vulnerability by sending crafted IPv6 packets that traverse the affected device. A successful exploit could allow the attacker to access resources that would typically be protected by the interface ACL. | |||||
| CVE-2019-16027 | 1 Cisco | 32 Asr 9000, Asr 9000v, Asr 9001 and 29 more | 2022-05-12 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the implementation of the Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the IS–IS process. The vulnerability is due to improper handling of a Simple Network Management Protocol (SNMP) request for specific Object Identifiers (OIDs) by the IS–IS process. An attacker could exploit this vulnerability by sending a crafted SNMP request to the affected device. A successful exploit could allow the attacker to cause a DoS condition in the IS–IS process. | |||||
| CVE-2019-16023 | 1 Cisco | 20 Asr 9000, Asr 9010, Asr 9904 and 17 more | 2021-11-02 | 5.0 MEDIUM | 7.5 HIGH |
| Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2019-16021 | 1 Cisco | 20 Asr 9000, Asr 9010, Asr 9904 and 17 more | 2021-10-29 | 5.0 MEDIUM | 7.5 HIGH |
| Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2021-34718 | 1 Cisco | 36 Asr 9000v-v2, Asr 9001, Asr 9006 and 33 more | 2021-09-21 | 8.5 HIGH | 8.1 HIGH |
| A vulnerability in the SSH Server process of Cisco IOS XR Software could allow an authenticated, remote attacker to overwrite and read arbitrary files on the local device. This vulnerability is due to insufficient input validation of arguments that are supplied by the user for a specific file transfer method. An attacker with lower-level privileges could exploit this vulnerability by specifying Secure Copy Protocol (SCP) parameters when authenticating to a device. A successful exploit could allow the attacker to elevate their privileges and retrieve and upload files on a device that they should not have access to. | |||||
| CVE-2021-34728 | 1 Cisco | 46 8101-32fh, 8101-32h, 8102-64h and 43 more | 2021-09-21 | 7.2 HIGH | 7.8 HIGH |
| Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2021-34722 | 1 Cisco | 44 8101-32fh, 8101-32h, 8102-64h and 41 more | 2021-09-21 | 7.2 HIGH | 6.7 MEDIUM |
| Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2021-34721 | 1 Cisco | 44 8101-32fh, 8101-32h, 8102-64h and 41 more | 2021-09-21 | 6.9 MEDIUM | 6.7 MEDIUM |
| Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2021-34719 | 1 Cisco | 46 8101-32fh, 8101-32h, 8102-64h and 43 more | 2021-09-21 | 7.2 HIGH | 7.8 HIGH |
| Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2021-1370 | 1 Cisco | 7 8201, 8202, 8808 and 4 more | 2021-02-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root. | |||||
| CVE-2021-1136 | 1 Cisco | 7 8201, 8202, 8808 and 4 more | 2021-02-08 | 4.6 MEDIUM | 6.7 MEDIUM |
| Multiple vulnerabilities in Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for the Cisco 8000 Series Routers could allow an authenticated, local attacker to execute unsigned code during the boot process on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2021-1244 | 1 Cisco | 7 8201, 8202, 8808 and 4 more | 2021-02-08 | 4.6 MEDIUM | 6.7 MEDIUM |
| Multiple vulnerabilities in Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for the Cisco 8000 Series Routers could allow an authenticated, local attacker to execute unsigned code during the boot process on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2019-16019 | 1 Cisco | 20 Asr 9000, Asr 9010, Asr 9904 and 17 more | 2020-10-05 | 5.0 MEDIUM | 8.6 HIGH |
| Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2020-3473 | 1 Cisco | 19 8201, 8202, 8808 and 16 more | 2020-09-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local CLI shell user to elevate privileges and gain full administrative control of the device. The vulnerability is due to incorrect mapping of a command to task groups within the source code. An attacker could exploit this vulnerability by first authenticating to the local CLI shell on the device and using the CLI command to bypass the task group–based checks. A successful exploit could allow the attacker to elevate privileges and perform actions on the device without authorization checks. | |||||
| CVE-2019-16018 | 1 Cisco | 28 Asr 9000v, Asr 9001, Asr 9006 and 25 more | 2020-02-03 | 4.3 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains crafted EVPN attributes. An attacker could indirectly exploit the vulnerability by sending BGP EVPN update messages with a specific, malformed attribute to an affected system and waiting for a user on the device to display the EVPN operational routes’ status. If successful, the attacker could cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2019-15989 | 1 Cisco | 28 Asr 9000v, Asr 9001, Asr 9006 and 25 more | 2020-01-29 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the implementation of the Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains a specific BGP attribute. An attacker could exploit this vulnerability by sending BGP update messages that include a specific, malformed attribute to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim’s BGP network on an existing, valid TCP connection to a BGP peer. | |||||
| CVE-2019-16022 | 1 Cisco | 28 Asr 9000v, Asr 9001, Asr 9006 and 25 more | 2020-01-29 | 5.0 MEDIUM | 8.6 HIGH |
| Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. | |||||