Total
22 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-32948 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2023-02-14 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds write issue exists in the DWG file-reading procedure in the Drawings SDK (All versions prior to 2022.4) resulting from the lack of proper validation of user-supplied data. This can result in a write past the end of an allocated buffer and allow attackers to cause a denial-of-service condition or execute code in the context of the current process. | |||||
| CVE-2021-32938 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2023-02-14 | 5.8 MEDIUM | 7.1 HIGH |
| Drawings SDK (All versions prior to 2022.4) are vulnerable to an out-of-bounds read due to parsing of DWG files resulting from the lack of proper validation of user-supplied data. This can result in a read past the end of an allocated buffer and allows attackers to cause a denial-of service condition or read sensitive information from memory. | |||||
| CVE-2021-32936 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2023-02-14 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds write issue exists in the DXF file-recovering procedure in the Drawings SDK (All versions prior to 2022.4) resulting from the lack of proper validation of user-supplied data. This can result in a write past the end of an allocated buffer and allow attackers to cause a denial-of-service condition or execute code in the context of the current process. | |||||
| CVE-2021-32940 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2023-01-13 | 5.8 MEDIUM | 7.1 HIGH |
| An out-of-bounds read issue exists in the DWG file-recovering procedure in the Drawings SDK (All versions prior to 2022.5) resulting from the lack of proper validation of user-supplied data. This can result in a read past the end of an allocated buffer and allow attackers to cause a denial-of-service condition or read sensitive information from memory locations. | |||||
| CVE-2022-28807 | 1 Opendesign | 1 Drawings Sdk | 2022-07-25 | N/A | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2023.2. An Out-of-Bounds Read vulnerability exists when rendering a .dwg file after it's opened in the recovery mode. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2022-28808 | 1 Opendesign | 1 Drawings Sdk | 2022-07-25 | N/A | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2023.3. An Out-of-Bounds Read vulnerability exists when reading DWG files in a recovery mode. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2022-28809 | 1 Opendesign | 1 Drawings Sdk | 2022-07-25 | N/A | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2023.3. An Out-of-Bounds Read vulnerability exists when reading a DWG file with an invalid vertex number in a recovery mode. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2021-32952 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2022-05-13 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds write issue exists in the DGN file-reading procedure in the Drawings SDK (Version 2022.4 and prior) resulting from the lack of proper validation of user-supplied data. This can result in a write past the end of an allocated buffer and allow attackers to cause a denial-of-service condition or execute code in the context of the current process. | |||||
| CVE-2021-31784 | 2 Opendesign, Siemens | 2 Drawings Sdk, Comos | 2022-04-15 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds write vulnerability exists in the file-reading procedure in Open Design Alliance Drawings SDK before 2021.6 on all supported by ODA platforms in static configuration. This can allow attackers to cause a crash, potentially enabling a denial of service attack (Crash, Exit, or Restart) or possible code execution. | |||||
| CVE-2021-32946 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2022-04-15 | 6.8 MEDIUM | 7.8 HIGH |
| An improper check for unusual or exceptional conditions issue exists within the parsing DGN files from Drawings SDK (Version 2022.4 and prior) resulting from the lack of proper validation of the user-supplied data. This may result in several of out-of-bounds problems and allow attackers to cause a denial-of-service condition or execute code in the context of the current process. | |||||
| CVE-2021-32944 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2022-04-15 | 6.8 MEDIUM | 7.8 HIGH |
| A use-after-free issue exists in the DGN file-reading procedure in the Drawings SDK (All versions prior to 2022.4) resulting from the lack of proper validation of user-supplied data. This can result in a memory corruption or arbitrary code execution, allowing attackers to cause a denial-of-service condition or execute code in the context of the current process. | |||||
| CVE-2021-32950 | 2 Opendesign, Siemens | 4 Drawings Sdk, Comos, Jt2go and 1 more | 2022-04-15 | 5.8 MEDIUM | 7.1 HIGH |
| An out-of-bounds read issue exists within the parsing of DXF files in the Drawings SDK (All versions prior to 2022.4) resulting from the lack of proper validation of user-supplied data. This can result in a read past the end of an allocated buffer and allows attackers to cause a denial-of-service condition or read sensitive information from memory locations. | |||||
| CVE-2021-44422 | 1 Opendesign | 1 Drawings Sdk | 2021-12-27 | 6.8 MEDIUM | 7.8 HIGH |
| An Improper Input Validation Vulnerability exists when reading a BMP file using Open Design Alliance Drawings SDK before 2022.12. Crafted data in a BMP file can trigger a write operation past the end of an allocated buffer, or lead to a heap-based buffer overflow. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2021-44859 | 1 Opendesign | 1 Drawings Sdk | 2021-12-27 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds read vulnerability exists when reading a TGA file using Open Design Alliance Drawings SDK before 2022.12. The specific issue exists after loading TGA files. An unchecked input data from a crafted TGA file leads to an out-of-bounds read. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2021-44860 | 1 Opendesign | 1 Drawings Sdk | 2021-12-27 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds read vulnerability exists when reading a TIF file using Open Design Alliance Drawings SDK before 2022.12. The specific issue exists after loading TIF files. An unchecked input data from a crafted TIF file leads to an out-of-bounds read. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2021-44047 | 1 Opendesign | 1 Drawings Sdk | 2021-12-07 | 6.8 MEDIUM | 7.8 HIGH |
| A use-after-free vulnerability exists when reading a DWF/DWFX file using Open Design Alliance Drawings SDK before 2022.11. The specific issue exists with parsing DWF/DWFX files. Crafted data in a DWF/DWFX file and lack of proper validation of input data can trigger a write operation past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2021-44045 | 1 Opendesign | 1 Drawings Sdk | 2021-12-07 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds write vulnerability exists when reading a DGN file using Open Design Alliance Drawings SDK before 2022.11. The specific issue exists within the parsing of DGN files. Crafted data in a DGN file and lack of proper validation for the XFAT sectors count can trigger a write operation past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2021-44044 | 1 Opendesign | 1 Drawings Sdk | 2021-12-07 | 6.8 MEDIUM | 7.8 HIGH |
| An out-of-bounds write vulnerability exists when reading a JPG file using Open Design Alliance Drawings SDK before 2022.11. The specific issue exists with parsing JPG files. Crafted data in a JPG (4 extraneous bytes before the marker 0xca) can trigger a write operation past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2021-43273 | 1 Opendesign | 1 Drawings Sdk | 2021-11-30 | 4.3 MEDIUM | 3.3 LOW |
| An Out-of-bounds Read vulnerability exists in the DGN file reading procedure in Open Design Alliance Drawings SDK before 2022.11. Crafted data in a DGN file and lack of verification of input data can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2021-43582 | 1 Opendesign | 1 Drawings Sdk | 2021-11-30 | 6.8 MEDIUM | 7.8 HIGH |
| A Use-After-Free Remote Vulnerability exists when reading a DWG file using Open Design Alliance Drawings SDK before 2022.11. The specific issue exists within the parsing of DWG files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. | |||||