Total
210 CVE
CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
---|---|---|---|---|---|
CVE-2017-5973 | 3 Debian, Qemu, Redhat | 5 Debian Linux, Qemu, Enterprise Linux and 2 more | 2021-08-04 | 2.1 LOW | 5.5 MEDIUM |
The xhci_kick_epctx function in hw/usb/hcd-xhci.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (infinite loop and QEMU process crash) via vectors related to control transfer descriptor sequence. | |||||
CVE-2017-2627 | 2 Openstack, Redhat | 2 Tripleo-common, Openstack | 2021-08-04 | 7.2 HIGH | 8.2 HIGH |
A flaw was found in openstack-tripleo-common as shipped with Red Hat Openstack Enterprise 10 and 11. The sudoers file as installed with OSP's openstack-tripleo-common package is much too permissive. It contains several lines for the mistral user that have wildcards that allow directory traversal with '..' and it grants full passwordless root access to the validations user. | |||||
CVE-2017-2620 | 5 Citrix, Debian, Qemu and 2 more | 10 Xenserver, Debian Linux, Qemu and 7 more | 2021-08-04 | 9.0 HIGH | 9.9 CRITICAL |
Quick emulator (QEMU) before 2.8 built with the Cirrus CLGD 54xx VGA Emulator support is vulnerable to an out-of-bounds access issue. The issue could occur while copying VGA data in cirrus_bitblt_cputovideo. A privileged user inside guest could use this flaw to crash the QEMU process OR potentially execute arbitrary code on host with privileges of the QEMU process. | |||||
CVE-2017-10906 | 2 Fluentd, Redhat | 2 Fluentd, Openstack | 2021-08-04 | 10.0 HIGH | 9.8 CRITICAL |
Escape sequence injection vulnerability in Fluentd versions 0.12.29 through 0.12.40 may allow an attacker to change the terminal UI or execute arbitrary commands on the device via unspecified vectors. | |||||
CVE-2020-1738 | 1 Redhat | 4 Ansible, Ansible Tower, Cloudforms Management Engine and 1 more | 2021-08-04 | 2.6 LOW | 3.9 LOW |
A flaw was found in Ansible Engine when the module package or service is used and the parameter 'use' is not specified. If a previous task is executed with a malicious user, the module sent can be selected by the attacker using the ansible facts file. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable. | |||||
CVE-2019-3895 | 2 Openstack, Redhat | 2 Octavia, Openstack | 2021-08-04 | 6.8 MEDIUM | 8.0 HIGH |
An access-control flaw was found in the Octavia service when the cloud platform was deployed using Red Hat OpenStack Platform Director. An attacker could cause new amphorae to run based on any arbitrary image. This meant that a remote attacker could upload a new amphorae image and, if requested to spawn new amphorae, Octavia would then pick up the compromised image. | |||||
CVE-2019-14856 | 2 Opensuse, Redhat | 4 Backports Sle, Leap, Ansible and 1 more | 2021-08-04 | 4.0 MEDIUM | 6.5 MEDIUM |
ansible before versions 2.8.6, 2.7.14, 2.6.20 is vulnerable to a None | |||||
CVE-2018-7536 | 4 Canonical, Debian, Djangoproject and 1 more | 4 Ubuntu Linux, Debian Linux, Django and 1 more | 2021-08-04 | 5.0 MEDIUM | 5.3 MEDIUM |
An issue was discovered in Django 2.0 before 2.0.3, 1.11 before 1.11.11, and 1.8 before 1.8.19. The django.utils.html.urlize() function was extremely slow to evaluate certain inputs due to catastrophic backtracking vulnerabilities in two regular expressions (only one regular expression for Django 1.8.x). The urlize() function is used to implement the urlize and urlizetrunc template filters, which were thus vulnerable. | |||||
CVE-2018-17963 | 4 Canonical, Debian, Qemu and 1 more | 6 Ubuntu Linux, Debian Linux, Qemu and 3 more | 2021-08-04 | 7.5 HIGH | 9.8 CRITICAL |
qemu_deliver_packet_iov in net/net.c in Qemu accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. | |||||
CVE-2018-17206 | 4 Canonical, Debian, Openvswitch and 1 more | 4 Ubuntu Linux, Debian Linux, Openvswitch and 1 more | 2021-08-04 | 4.0 MEDIUM | 4.9 MEDIUM |
An issue was discovered in Open vSwitch (OvS) 2.7.x through 2.7.6. The decode_bundle function inside lib/ofp-actions.c is affected by a buffer over-read issue during BUNDLE action decoding. | |||||
CVE-2018-17205 | 3 Canonical, Openvswitch, Redhat | 3 Ubuntu Linux, Openvswitch, Openstack | 2021-08-04 | 5.0 MEDIUM | 7.5 HIGH |
An issue was discovered in Open vSwitch (OvS) 2.7.x through 2.7.6, affecting ofproto_rule_insert__ in ofproto/ofproto.c. During bundle commit, flows that are added in a bundle are applied to ofproto in order. If a flow cannot be added (e.g., the flow action is a go-to for a group id that does not exist), OvS tries to revert back all previous flows that were successfully applied from the same bundle. This is possible since OvS maintains list of old flows that were replaced by flows from the bundle. While reinserting old flows, OvS has an assertion failure due to a check on rule state != RULE_INITIALIZED. This would work for new flows, but for an old flow the rule state is RULE_REMOVED. The assertion failure causes an OvS crash. | |||||
CVE-2018-17204 | 4 Canonical, Debian, Openvswitch and 1 more | 4 Ubuntu Linux, Debian Linux, Openvswitch and 1 more | 2021-08-04 | 4.0 MEDIUM | 4.3 MEDIUM |
An issue was discovered in Open vSwitch (OvS) 2.7.x through 2.7.6, affecting parse_group_prop_ntr_selection_method in lib/ofp-util.c. When decoding a group mod, it validates the group type and command after the whole group mod has been decoded. The OF1.5 decoder, however, tries to use the type and command earlier, when it might still be invalid. This causes an assertion failure (via OVS_NOT_REACHED). ovs-vswitchd does not enable support for OpenFlow 1.5 by default. | |||||
CVE-2018-14620 | 1 Redhat | 1 Openstack | 2021-08-04 | 7.5 HIGH | 9.8 CRITICAL |
The OpenStack RabbitMQ container image insecurely retrieves the rabbitmq_clusterer component over HTTP during the build stage. This could potentially allow an attacker to serve malicious code to the image builder and install in the resultant container image. Version of openstack-rabbitmq-container and openstack-containers as shipped with Red Hat Openstack 12, 13, 14 are believed to be vulnerable. | |||||
CVE-2018-11219 | 4 Debian, Oracle, Redhat and 1 more | 4 Debian Linux, Communications Operations Monitor, Openstack and 1 more | 2021-08-04 | 7.5 HIGH | 9.8 CRITICAL |
An Integer Overflow issue was discovered in the struct library in the Lua subsystem in Redis before 3.2.12, 4.x before 4.0.10, and 5.x before 5.0 RC2, leading to a failure of bounds checking. | |||||
CVE-2018-11218 | 4 Debian, Oracle, Redhat and 1 more | 4 Debian Linux, Communications Operations Monitor, Openstack and 1 more | 2021-08-04 | 7.5 HIGH | 9.8 CRITICAL |
Memory Corruption was discovered in the cmsgpack library in the Lua subsystem in Redis before 3.2.12, 4.x before 4.0.10, and 5.x before 5.0 RC2 because of stack-based buffer overflows. | |||||
CVE-2018-10915 | 4 Canonical, Debian, Postgresql and 1 more | 9 Ubuntu Linux, Debian Linux, Postgresql and 6 more | 2021-08-04 | 6.0 MEDIUM | 7.5 HIGH |
A vulnerability was found in libpq, the default PostgreSQL client library where libpq failed to properly reset its internal state between connections. If an affected version of libpq was used with "host" or "hostaddr" connection parameters from untrusted input, attackers could bypass client-side connection security features, obtain access to higher privileged connections or potentially cause other impact through SQL injection, by causing the PQescape() functions to malfunction. Postgresql versions before 10.5, 9.6.10, 9.5.14, 9.4.19, and 9.3.24 are affected. | |||||
CVE-2018-10903 | 3 Canonical, Cryptography, Redhat | 3 Ubuntu Linux, Python-cryptography, Openstack | 2021-08-04 | 5.0 MEDIUM | 7.5 HIGH |
A flaw was found in python-cryptography versions between >=1.9.0 and <2.3. The finalize_with_tag API did not enforce a minimum tag length. If a user did not validate the input length prior to passing it to finalize_with_tag an attacker could craft an invalid payload with a shortened tag (e.g. 1 byte) such that they would have a 1 in 256 chance of passing the MAC check. GCM tag forgeries can cause key leakage. | |||||
CVE-2018-10899 | 2 Jolokia, Redhat | 2 Jolokia, Openstack | 2021-08-04 | 6.8 MEDIUM | 8.8 HIGH |
A flaw was found in Jolokia versions from 1.2 to before 1.6.1. Affected versions are vulnerable to a system-wide CSRF. This holds true for properly configured instances with strict checking for origin and referrer headers. This could result in a Remote Code Execution attack. | |||||
CVE-2018-10898 | 2 Openstack, Redhat | 2 Tripleo Heat Templates, Openstack | 2021-08-04 | 5.8 MEDIUM | 8.8 HIGH |
A vulnerability was found in openstack-tripleo-heat-templates before version 8.0.2-40. When deployed using Director using default configuration, Opendaylight in RHOSP13 is configured with easily guessable default credentials. | |||||
CVE-2018-10875 | 4 Canonical, Debian, Redhat and 1 more | 11 Ubuntu Linux, Debian Linux, Ansible Engine and 8 more | 2021-08-04 | 4.6 MEDIUM | 7.8 HIGH |
A flaw was found in ansible. ansible.cfg is read from the current working directory which can be altered to make it point to a plugin or a module path under the control of an attacker, thus allowing the attacker to execute arbitrary code. |