Filtered by vendor Cisco
Subscribe
Total
5838 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-6720 | 1 Cisco | 170 Esw2-350g-52, Esw2-350g-52 Firmware, Esw2-350g-52dc and 167 more | 2020-09-04 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Secure Shell (SSH) subsystem of Cisco Small Business Managed Switches software could allow an authenticated, remote attacker to cause a reload of the affected switch, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SSH connections. An attacker could exploit this vulnerability by logging in to an affected switch via SSH and sending a malicious SSH message. This vulnerability affects the following Cisco products when SSH is enabled: Small Business 300 Series Managed Switches, Small Business 500 Series Stackable Managed Switches, 350 Series Managed Switches, 350X Series Stackable Managed Switches, 550X Series Stackable Managed Switches, ESW2 Series Advanced Switches. Cisco Bug IDs: CSCvb48377. | |||||
| CVE-2017-3864 | 1 Cisco | 2 Ios, Ios Xe | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892. | |||||
| CVE-2020-3504 | 1 Cisco | 108 Firepower 1010, Firepower 1120, Firepower 1140 and 105 more | 2020-09-04 | 2.1 LOW | 3.3 LOW |
| A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI. | |||||
| CVE-2018-0313 | 1 Cisco | 72 Nexus 172tq-xl, Nexus 2148t, Nexus 2224tp Ge and 69 more | 2020-09-04 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to send a malicious packet to the management interface on an affected system and execute a command-injection exploit. The vulnerability is due to incorrect input validation of user-supplied data to the NX-API subsystem. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Note: NX-API is disabled by default. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd47415, CSCve03216, CSCve03224, CSCve03234. | |||||
| CVE-2018-0306 | 1 Cisco | 89 Mds 9132t, Mds 9148, Mds 9148s and 86 more | 2020-09-04 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663. | |||||
| CVE-2018-0302 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2020-09-04 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743. | |||||
| CVE-2018-0307 | 1 Cisco | 65 Nexus 172tq-xl, Nexus 3016, Nexus 3048 and 62 more | 2020-09-04 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768. | |||||
| CVE-2018-0338 | 1 Cisco | 1 Unified Computing System | 2020-09-04 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the role-based access-checking mechanisms of Cisco Unified Computing System (UCS) Software could allow an authenticated, local attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software lacks proper input and validation checks for certain file systems. An attacker could exploit this vulnerability by issuing crafted commands in the CLI of an affected system. A successful exploit could allow the attacker to cause other users to execute unwanted arbitrary commands on the affected system. Cisco Bug IDs: CSCvf52994. | |||||
| CVE-2018-0355 | 1 Cisco | 1 Unified Communications Manager | 2020-09-04 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the web UI of Cisco Unified Communications Manager (Unified CM) could allow an unauthenticated, remote attacker to conduct a cross-frame scripting (XFS) attack against the user of the web UI of an affected system. The vulnerability is due to insufficient protections for HTML inline frames (iframes) by the web UI of the affected software. An attacker could exploit this vulnerability by persuading a user of the affected UI to navigate to an attacker-controlled web page that contains a malicious HTML iframe. A successful exploit could allow the attacker to conduct click-jacking or other client-side browser attacks on the affected system. Cisco Bug IDs: CSCvg19761. | |||||
| CVE-2018-0329 | 1 Cisco | 1 Wide Area Application Services | 2020-09-04 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the default configuration of the Simple Network Management Protocol (SNMP) feature of Cisco Wide Area Application Services (WAAS) Software could allow an unauthenticated, remote attacker to read data from an affected device via SNMP. The vulnerability is due to a hard-coded, read-only community string in the configuration file for the SNMP daemon. An attacker could exploit this vulnerability by using the static community string in SNMP version 2c queries to an affected device. A successful exploit could allow the attacker to read any data that is accessible via SNMP on the affected device. Note: The static credentials are defined in an internal configuration file and are not visible in the current operation configuration ('running-config') or the startup configuration ('startup-config'). Cisco Bug IDs: CSCvi40137. | |||||
| CVE-2018-0296 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2020-09-04 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029. | |||||
| CVE-2018-0274 | 1 Cisco | 1 Network Services Orchestrator | 2020-09-04 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the CLI parser of Cisco Network Services Orchestrator (NSO) could allow an authenticated, remote attacker to execute arbitrary shell commands with the privileges of the root user. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting malicious arguments into vulnerable commands. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. This vulnerability affects the following releases of Cisco Network Services Orchestrator (NSO): 4.1 through 4.1.6.0, 4.2 through 4.2.4.0, 4.3 through 4.3.3.0, 4.4 through 4.4.2.0. Cisco Bug IDs: CSCvf99982. | |||||
| CVE-2018-0263 | 1 Cisco | 1 Meeting Server | 2020-09-04 | 3.3 LOW | 7.4 HIGH |
| A vulnerability in Cisco Meeting Server (CMS) could allow an unauthenticated, adjacent attacker to access services running on internal device interfaces of an affected system. The vulnerability is due to incorrect default configuration of the device, which can expose internal interfaces and ports on the external interface of the system. A successful exploit could allow the attacker to gain unauthenticated access to configuration and database files and sensitive meeting information on an affected system. This vulnerability affects Cisco Meeting Server (CMS) 2000 Platforms that are running a CMS Software release prior to Release 2.2.13 or Release 2.3.4. Cisco Bug IDs: CSCvg76471. | |||||
| CVE-2020-3484 | 1 Cisco | 1 Vision Dynamic Signage Director | 2020-09-03 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Vision Dynamic Signage Director could allow an unauthenticated, remote attacker to view potentially sensitive information on an affected device. The vulnerability is due to incorrect permissions within Apache configuration. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to view potentially sensitive information on the affected device. | |||||
| CVE-2020-3454 | 1 Cisco | 83 Mds 9000, Mds 9100, Mds 9134 and 80 more | 2020-09-03 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS. | |||||
| CVE-2020-3415 | 1 Cisco | 66 Nexus 3016, Nexus 3048, Nexus 3064 and 63 more | 2020-09-03 | 7.9 HIGH | 8.8 HIGH |
| A vulnerability in the Data Management Engine (DME) of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Exploitation of this vulnerability also requires jumbo frames to be enabled on the interface that receives the crafted Cisco Discovery Protocol packets on the affected device. | |||||
| CVE-2020-3466 | 1 Cisco | 1 Dna Center | 2020-09-03 | 4.3 MEDIUM | 6.1 MEDIUM |
| Multiple vulnerabilities in the web-based management interface of Cisco DNA Center software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface of an affected device. The vulnerabilities exist because the web-based management interface on an affected device does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. | |||||
| CVE-2020-3446 | 1 Cisco | 10 Csp 5228-w, Csp 5228-w Firmware, Csp 5436-w and 7 more | 2020-09-03 | 7.5 HIGH | 9.8 CRITICAL |
| A vulnerability in Cisco Virtual Wide Area Application Services (vWAAS) with Cisco Enterprise NFV Infrastructure Software (NFVIS)-bundled images for Cisco ENCS 5400-W Series and CSP 5000-W Series appliances could allow an unauthenticated, remote attacker to log into the NFVIS CLI of an affected device by using accounts that have a default, static password. The vulnerability exists because the affected software has user accounts with default, static passwords. An attacker with access to the NFVIS CLI of an affected device could exploit this vulnerability by logging into the CLI. A successful exploit could allow the attacker to access the NFVIS CLI with administrator privileges. | |||||
| CVE-2020-3440 | 1 Cisco | 1 Webex Meetings | 2020-09-02 | 4.3 MEDIUM | 6.5 MEDIUM |
| A vulnerability in Cisco Webex Meetings Desktop App for Windows could allow an unauthenticated, remote attacker to overwrite arbitrary files on an end-user system. The vulnerability is due to improper validation of URL parameters that are sent from a website to the affected application. An attacker could exploit this vulnerability by persuading a user to follow a URL to a website that is designed to submit crafted input to the affected application. A successful exploit could allow the attacker to overwrite arbitrary files on the affected system, possibly corrupting or deleting critical system files. | |||||
| CVE-2020-3443 | 1 Cisco | 1 Smart Software Manager On-prem | 2020-09-02 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges and execute commands with higher privileges. The vulnerability is due to insufficient authorization of the System Operator role capabilities. An attacker could exploit this vulnerability by logging in with the System Operator role, performing a series of actions, and then assuming a new higher privileged role. A successful exploit could allow the attacker to perform all actions associated with the privilege of the assumed role. If that role is an administrative role, the attacker would gain full access to the device. | |||||