Total
265 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-0295 | 1 Cisco | 65 Nexus 172tq-xl, Nexus 3016, Nexus 3048 and 62 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Border Gateway Protocol (BGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the device unexpectedly reloading. The vulnerability is due to incomplete input validation of the BGP update messages. An attacker could exploit this vulnerability by sending a crafted BGP update message to the targeted device. An exploit could allow the attacker to cause the switch to reload unexpectedly. The Cisco implementation of the BGP protocol only accepts incoming BGP traffic from explicitly defined peers. To exploit this vulnerability, an attacker must be able to send the malicious packets over a TCP connection that appears to come from a trusted BGP peer or inject malformed messages into the victim's BGP network. This would require obtaining information about the BGP peers in the affected system's trusted network. The vulnerability may be triggered when the router receives a malformed BGP message from a peer on an existing BGP session. At least one BGP neighbor session must be established for a router to be vulnerable. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve79599, CSCve87784, CSCve91371, CSCve91387. | |||||
| CVE-2018-0298 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the web UI of Cisco FXOS and Cisco UCS Fabric Interconnect Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to incorrect input validation in the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet directed to the physical management interface of an affected system. A successful exploit could allow the attacker to cause the process to crash and possibly reload the device, resulting in a denial of service (DoS) condition on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61398, CSCvb86799. | |||||
| CVE-2018-0299 | 1 Cisco | 2 Nexus 4001i, Nx-os | 2019-10-09 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco NX-OS on the Cisco Nexus 4000 Series Switch could allow an authenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete validation of an SNMP poll request for a specific MIB. An attacker could exploit this vulnerability by sending a specific SNMP poll request to the targeted device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg10442. | |||||
| CVE-2018-0301 | 1 Cisco | 66 Mds 9000, Nexus 172tq-xl, Nexus 3016 and 63 more | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412. | |||||
| CVE-2018-0303 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2019-10-09 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167. | |||||
| CVE-2018-0309 | 1 Cisco | 40 Nexus 3016, Nexus 3048, Nexus 3064 and 37 more | 2019-10-09 | 6.8 MEDIUM | 7.7 HIGH |
| A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136. | |||||
| CVE-2018-0310 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to obtain sensitive information from memory or cause a denial of service (DoS) condition on the affected product. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overread condition, which could allow the attacker to obtain sensitive information from memory or cause a DoS condition on the affected product. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69957, CSCve02435, CSCve04859, CSCve41536, CSCve41538, CSCve41559. | |||||
| CVE-2018-0311 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could cause process crashes and result in a DoS condition on the device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69960, CSCve02463, CSCve04859, CSCve41530, CSCve41537, CSCve41541, CSCve41557. | |||||
| CVE-2018-0330 | 1 Cisco | 65 Mds 9000, Nexus 172tq-xl, Nexus 3016 and 62 more | 2019-10-09 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability in the NX-API management application programming interface (API) in devices running, or based on, Cisco NX-OS Software could allow an authenticated, remote attacker to execute commands with elevated privileges. The vulnerability is due to a failure to properly validate certain parameters included within an NX-API request. An attacker that can successfully authenticate to the NX-API could submit a request designed to bypass NX-OS role assignment. A successful exploit could allow the attacker to execute commands with elevated privileges. This vulnerability affects the following if configured to use the NX-API feature: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvc73177, CSCve40903, CSCve40911. | |||||
| CVE-2018-0378 | 1 Cisco | 13 Nexus 5548p, Nexus 5548up, Nexus 5596t and 10 more | 2019-10-09 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Precision Time Protocol (PTP) feature of Cisco Nexus 5500, 5600, and 6000 Series Switches running Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of protection against PTP frame flood attacks. An attacker could exploit this vulnerability by sending large streams of malicious IPv4 or IPv6 PTP traffic to the affected device. A successful exploit could allow the attacker to cause a DoS condition, impacting the traffic passing through the device. | |||||
| CVE-2018-0395 | 1 Cisco | 12 Firepower 9300, Fxos, Nexus 7000 10-slot and 9 more | 2019-10-09 | 2.9 LOW | 5.3 MEDIUM |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) implementation for Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition when the device unexpectedly reloads. The vulnerability is due to improper input validation of certain type, length, value (TLV) fields of the LLDP frame header. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface on the targeted device. A successful exploit could allow the attacker to cause the switch to reload unexpectedly. | |||||
| CVE-2017-12301 | 1 Cisco | 38 Multilayer Director, Nexus 2000, Nexus 3000 and 35 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. This vulnerability affects the following Cisco products if they are running Cisco NX-OS Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches - Standalone, NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvb86832, CSCvd86474, CSCvd86479, CSCvd86484, CSCvd86490, CSCve97102, CSCvf12757, CSCvf12804, CSCvf12815, CSCvf15198. | |||||
| CVE-2017-12351 | 1 Cisco | 1 Nx-os | 2019-10-09 | 4.6 MEDIUM | 5.7 MEDIUM |
| A vulnerability in the guest shell feature of Cisco NX-OS System Software could allow an authenticated, local attacker to read and send packets outside the scope of the guest shell container. An attacker would need valid administrator credentials to perform this attack. The vulnerability is due to insufficient internal security measures in the guest shell feature. An attacker could exploit this vulnerability by sending or receiving packets on the device-internal network outside of the guest shell container, aka "Unauthorized Internal Interface Access." This vulnerability affects the following products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvf33038. | |||||
| CVE-2017-12342 | 1 Cisco | 1 Nx-os | 2019-10-09 | 4.6 MEDIUM | 6.8 MEDIUM |
| A vulnerability in the Open Agent Container (OAC) feature of Cisco Nexus Series Switches could allow an unauthenticated, local attacker to read and send packets outside the scope of the OAC. The vulnerability is due to insufficient internal security measures in the OAC feature. An attacker could exploit this vulnerability by crafting specific packets for communication on the device-internal network. A successful exploit could allow the attacker to run code on the underlying host operating system. OAC is not enabled by default. For a device to be vulnerable, an administrator would need to install and activate this feature. This vulnerability affects the following Cisco Nexus Series Switches: Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. Cisco Bug IDs: CSCve53542, CSCvf36621. | |||||
| CVE-2017-12341 | 1 Cisco | 2 Nx-os, Unified Computing System | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. An attacker would need valid administrator credentials to perform this exploit. The vulnerability is due to insufficient input validation during the installation of a software patch. An attacker could exploit this vulnerability by installing a crafted patch image with the vulnerable operation occurring prior to patch activation. An exploit could allow the attacker to execute arbitrary commands on an affected system as root. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf23735, CSCvg04072. | |||||
| CVE-2017-12338 | 1 Cisco | 3 Lan Switch Software, Nx-os, Unified Computing System | 2019-10-09 | 2.1 LOW | 6.0 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to read the contents of arbitrary files. The vulnerability is due to insufficient input validation for a specific CLI command. An attacker could exploit this vulnerability by issuing a crafted command on the CLI. An exploit could allow the attacker unauthorized access to read arbitrary files on the underlying local file system. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to read files from any VDC. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51707, CSCve93961, CSCve93964, CSCve93965, CSCve93968, CSCve93974, CSCve93976. | |||||
| CVE-2017-12329 | 1 Cisco | 3 Firepower Extensible Operating System, Nx-os, Unified Computing System | 2019-10-09 | 4.6 MEDIUM | 6.3 MEDIUM |
| A vulnerability in the CLI of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco FXOS or NX-OS System Software: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51700, CSCve93833, CSCve93860, CSCve93863, CSCve93864, CSCve93880. | |||||
| CVE-2017-12330 | 1 Cisco | 1 Nx-os | 2019-10-09 | 4.6 MEDIUM | 6.3 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command and gaining unauthorized access to the underlying operating system of the device. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99902, CSCvf14879. | |||||
| CVE-2017-6650 | 1 Cisco | 10 Nexus 5548up, Nexus 5596t, Nexus 5596up and 7 more | 2019-10-02 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771. | |||||
| CVE-2017-6649 | 1 Cisco | 10 Nexus 5548up, Nexus 5596t, Nexus 5596up and 7 more | 2019-10-02 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the CLI of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86787, CSCve60516, CSCve60555. | |||||