Filtered by vendor Cisco
Subscribe
Total
5838 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-3422 | 1 Cisco | 30 Asr 1001-hx, Asr 1001-x, Asr 1002-hx and 27 more | 2020-10-08 | 4.3 MEDIUM | 7.5 HIGH |
| A vulnerability in the IP Service Level Agreement (SLA) responder feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the IP SLA responder to reuse an existing port, resulting in a denial of service (DoS) condition. The vulnerability exists because the IP SLA responder could consume a port that could be used by another feature. An attacker could exploit this vulnerability by sending specific IP SLA control packets to the IP SLA responder on an affected device. The control packets must include the port number that could be used by another configured feature. A successful exploit could allow the attacker to cause an in-use port to be consumed by the IP SLA responder, impacting the feature that was using the port and resulting in a DoS condition. | |||||
| CVE-2020-3421 | 1 Cisco | 24 Asr 1001-hx, Asr 1001-x, Asr 1002-hx and 21 more | 2020-10-08 | 7.1 HIGH | 7.5 HIGH |
| Multiple vulnerabilities in the Zone-Based Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload or stop forwarding traffic through the firewall. The vulnerabilities are due to incomplete handling of Layer 4 packets through the device. An attacker could exploit these vulnerabilities by sending a certain sequence of traffic patterns through the device. A successful exploit could allow the attacker to cause the device to reload or stop forwarding traffic through the firewall, resulting in a denial of service. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2019-1754 | 1 Cisco | 1 Ios Xe | 2020-10-08 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the authorization subsystem of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to improper validation of user privileges of web UI users. An attacker could exploit this vulnerability by submitting a malicious payload to a specific endpoint in the web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device. | |||||
| CVE-2019-1747 | 1 Cisco | 2 Ios, Ios Xe | 2020-10-08 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the implementation of the Short Message Service (SMS) handling functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper processing of SMS protocol data units (PDUs) that are encoded with a special character set. An attacker could exploit this vulnerability by sending a malicious SMS message to an affected device. A successful exploit could allow the attacker to cause the wireless WAN (WWAN) cellular interface module on an affected device to crash, resulting in a DoS condition that would require manual intervention to restore normal operating conditions. | |||||
| CVE-2019-1742 | 1 Cisco | 1 Ios Xe | 2020-10-08 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the web UI of Cisco IOS XE Software could allow an unauthenticated, remote attacker to access sensitive configuration information. The vulnerability is due to improper access control to files within the web UI. An attacker could exploit this vulnerability by sending a malicious request to an affected device. A successful exploit could allow the attacker to gain access to sensitive configuration information. | |||||
| CVE-2019-1741 | 1 Cisco | 1 Ios Xe | 2020-10-08 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Cisco Encrypted Traffic Analytics (ETA) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. | |||||
| CVE-2019-1763 | 1 Cisco | 8 Ip Conference Phone 8832, Ip Conference Phone 8832 Firmware, Ip Phone 8800 and 5 more | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to bypass authorization, access critical services, and cause a denial of service (DoS) condition. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to critical services and cause a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 11.0(5) for Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 for the IP Conference Phone 8832 and the rest of the IP Phone 8800 Series. Cisco IP Conference Phone 8831 is not affected. | |||||
| CVE-2019-1603 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2020-10-08 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to escalate lower-level privileges to the administrator level. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow an attacker to make configuration changes to the system as administrator. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1601 | 1 Cisco | 13 Mds 9000, Nexus 2000, Nexus 3000 and 10 more | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1602 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to access sensitive data that could be used to elevate their privileges to administrator. The vulnerability is due to improper implementation of filesystem permissions. An attacker could exploit this vulnerability by logging in to the CLI of an affected device, accessing a specific file, and leveraging this information to authenticate to the NX-API server. A successful exploit could allow an attacker to make configuration changes as administrator. Note: NX-API is disabled by default. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1599 | 1 Cisco | 15 Nexus 1000v, Nexus 3000, Nexus 3500 and 12 more | 2020-10-08 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to an issue with allocating and freeing memory buffers in the network stack. An attacker could exploit this vulnerability by sending crafted TCP streams to an affected device in a sustained way. A successful exploit could cause the network stack of an affected device to run out of available buffers, impairing operations of control plane and management plane protocols, resulting in a DoS condition. Note: This vulnerability can be triggered only by traffic that is destined to an affected device and cannot be exploited using traffic that transits an affected device. Nexus 1000V Switch for Microsoft Hyper-V is affected in versions prior to 5.2(1)SM3(2.1). Nexus 1000V Switch for VMware vSphere is affected in versions prior to 5.2(1)SV3(4.1a). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(6) and 9.2(2). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(11), 7.0(3)I7(6), and 9.2(2). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5) and 9.2(2). Nexus 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(5)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22. Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5) and 9.2(2). UCS 6200 and 6300 Series Fabric Interconnect are affected in versions prior to 3.2(3j) and 4.0(2a). UCS 6400 Series Fabric Interconnect are affected in versions prior to 4.0(2a). | |||||
| CVE-2019-1596 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level to root. The attacker must authenticate with valid user credentials. The vulnerability is due to incorrect permissions of a system executable. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level to root. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1593 | 1 Cisco | 9 Nexus 3000, Nexus 3500, Nexus 3600 and 6 more | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level by executing commands authorized to other user roles. The attacker must authenticate with valid user credentials. The vulnerability is due to the incorrect implementation of a Bash shell command that allows role-based access control (RBAC) to be bypassed. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level by executing commands that should be restricted to other roles. For example, a dev-ops user could escalate their privilege level to admin with a successful exploit of this vulnerability. | |||||
| CVE-2019-1591 | 1 Cisco | 2 Nexus 9000, Nx-os | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d). | |||||
| CVE-2020-3503 | 1 Cisco | 128 Asr1001-hx, Asr1001-hx-rf, Asr1001-x-rf and 125 more | 2020-10-08 | 3.6 LOW | 6.0 MEDIUM |
| A vulnerability in the file system permissions of Cisco IOS XE Software could allow an authenticated, local attacker to obtain read and write access to critical configuration or system files. The vulnerability is due to insufficient file system permissions on an affected device. An attacker could exploit this vulnerability by connecting to an affected device's guest shell, and accessing or modifying restricted files. A successful exploit could allow the attacker to view or modify restricted information or configurations that are normally not accessible to system administrators. | |||||
| CVE-2020-3509 | 1 Cisco | 2 Cbr-8, Ios Xe | 2020-10-08 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the DHCP message handler of Cisco IOS XE Software for Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to cause the supervisor to crash, which could result in a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when DHCP version 4 (DHCPv4) messages are parsed. An attacker could exploit this vulnerability by sending a malicious DHCPv4 message to or through a WAN interface of an affected device. A successful exploit could allow the attacker to cause a reload of the affected device. Note: On Cisco cBR-8 Converged Broadband Routers, all of the following are considered WAN interfaces: 10 Gbps Ethernet interfaces 100 Gbps Ethernet interfaces Port channel interfaces that include multiple 10 and/or 100 Gbps Ethernet interfaces | |||||
| CVE-2020-3480 | 1 Cisco | 26 Asr 1001-hx, Asr 1001-x, Asr 1002-hx and 23 more | 2020-10-08 | 7.8 HIGH | 8.6 HIGH |
| Multiple vulnerabilities in the Zone-Based Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload or stop forwarding traffic through the firewall. The vulnerabilities are due to incomplete handling of Layer 4 packets through the device. An attacker could exploit these vulnerabilities by sending a certain sequence of traffic patterns through the device. A successful exploit could allow the attacker to cause the device to reload or stop forwarding traffic through the firewall, resulting in a denial of service. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2019-12622 | 1 Cisco | 7 Roomos, Telepresence Codec C40, Telepresence Codec C40 Firmware and 4 more | 2020-10-08 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability in Cisco RoomOS Software could allow an authenticated, local attacker to write files to the underlying filesystem with root privileges. The vulnerability is due to insufficient permission restrictions on a specific process. An attacker could exploit this vulnerability by logging in to an affected device with remote support credentials and initiating the specific process on the device and sending crafted data to that process. A successful exploit could allow the attacker to write files to the underlying file system with root privileges. | |||||
| CVE-2019-12626 | 1 Cisco | 1 Unified Contact Center Express | 2020-10-08 | 3.5 LOW | 4.8 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Unified Contact Center Express (Unified CCX) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker needs valid administrator credentials. | |||||
| CVE-2019-12627 | 1 Cisco | 29 Amp 7150, Amp 8150, Firepower 7010 and 26 more | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the application policy configuration of the Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data. | |||||