Filtered by vendor Cisco
Subscribe
Total
5838 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-1863 | 1 Cisco | 13 Encs 5100, Encs 5400, Integrated Management Controller Supervisor and 10 more | 2020-10-16 | 9.0 HIGH | 8.1 HIGH |
| A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to make unauthorized changes to the system configuration. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow a user with read-only privileges to change critical system configurations using administrator privileges. | |||||
| CVE-2019-1839 | 1 Cisco | 8 Cbr-8, Cbr-8 Firmware, Remote Phy 120 and 5 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying various CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system. | |||||
| CVE-2019-1972 | 1 Cisco | 1 Enterprise Network Function Virtualization Infrastructure | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability the Cisco Enterprise NFV Infrastructure Software (NFVIS) restricted CLI could allow an authenticated, local attacker with valid administrator-level credentials to elevate privileges and execute arbitrary commands on the underlying operating system as root. The vulnerability is due to insufficient restrictions during the execution of an affected CLI command. An attacker could exploit this vulnerability by leveraging the insufficient restrictions during the execution of an affected command. A successful exploit could allow the attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. | |||||
| CVE-2019-1960 | 1 Cisco | 1 Enterprise Network Function Virtualization Infrastructure | 2020-10-16 | 2.1 LOW | 4.4 MEDIUM |
| Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to read arbitrary files on the underlying operating system (OS) of an affected device. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2019-1957 | 1 Cisco | 1 Iot Field Network Director | 2020-10-16 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the web interface of Cisco IoT Field Network Director could allow an unauthenticated, remote attacker to trigger high CPU usage, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) renegotiation requests. An attacker could exploit this vulnerability by sending renegotiation requests at a high rate. A successful exploit could increase the resource usage on the system, eventually leading to a DoS condition. | |||||
| CVE-2019-1959 | 1 Cisco | 1 Enterprise Network Function Virtualization Infrastructure | 2020-10-16 | 2.1 LOW | 4.4 MEDIUM |
| Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to read arbitrary files on the underlying operating system (OS) of an affected device. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2019-1951 | 1 Cisco | 1 Sd-wan Firmware | 2020-10-16 | 5.0 MEDIUM | 5.8 MEDIUM |
| A vulnerability in the packet filtering features of Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to bypass L3 and L4 traffic filters. The vulnerability is due to improper traffic filtering conditions on an affected device. An attacker could exploit this vulnerability by crafting a malicious TCP packet with specific characteristics and sending it to a target device. A successful exploit could allow the attacker to bypass the L3 and L4 traffic filters and inject an arbitrary packet in the network. | |||||
| CVE-2019-1944 | 1 Cisco | 1 Adaptive Security Appliance Software | 2020-10-16 | 4.4 MEDIUM | 7.3 HIGH |
| Multiple vulnerabilities in the smart tunnel functionality of Cisco Adaptive Security Appliance (ASA) could allow an authenticated, local attacker to elevate privileges to the root user or load a malicious library file while the tunnel is being established. For more information about these vulnerabilities, see the Details section of this security advisory. | |||||
| CVE-2019-1934 | 1 Cisco | 1 Adaptive Security Appliance Software | 2020-10-16 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to elevate privileges and execute administrative functions on an affected device. The vulnerability is due to insufficient authorization validation. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then sending specific HTTPS requests to execute administrative functions using the information retrieved during initial login. | |||||
| CVE-2019-1918 | 1 Cisco | 2 Carrier Routing System, Ios Xr | 2020-10-16 | 6.1 MEDIUM | 7.4 HIGH |
| A vulnerability in the implementation of Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an unauthenticated attacker who is in the same IS-IS area to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IS–IS link-state protocol data units (PDUs). An attacker could exploit this vulnerability by sending specific link-state PDUs to an affected system to be processed. A successful exploit could allow the attacker to cause incorrect calculations used in the weighted remote shared risk link groups (SRLG) or in the IGP Flexible Algorithm. It could also cause tracebacks to the logs or potentially cause the receiving device to crash the IS–IS process, resulting in a DoS condition. | |||||
| CVE-2019-1912 | 1 Cisco | 22 Sf-220-24, Sf-220-24 Firmware, Sf220-24p and 19 more | 2020-10-16 | 6.4 MEDIUM | 9.1 CRITICAL |
| A vulnerability in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an unauthenticated, remote attacker to upload arbitrary files. The vulnerability is due to incomplete authorization checks in the web management interface. An attacker could exploit this vulnerability by sending a malicious request to certain parts of the web management interface. Depending on the configuration of the affected switch, the malicious request must be sent via HTTP or HTTPS. A successful exploit could allow the attacker to modify the configuration of an affected device or to inject a reverse shell. This vulnerability affects Cisco Small Business 220 Series Smart Switches running firmware versions prior to 1.1.4.4 with the web management interface enabled. The web management interface is enabled via both HTTP and HTTPS by default. | |||||
| CVE-2019-1981 | 1 Cisco | 3 Firepower Management Center, Firepower Services Software For Asa, Firepower Threat Defense | 2020-10-16 | 5.0 MEDIUM | 5.8 MEDIUM |
| A vulnerability in the normalization functionality of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to insufficient normalization of a text-based payload. An attacker could exploit this vulnerability by sending traffic that contains specifically obfuscated payloads through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious payloads to protected systems that would otherwise be blocked. | |||||
| CVE-2019-1978 | 1 Cisco | 3 Firepower Management Center, Firepower Services Software For Asa, Firepower Threat Defense | 2020-10-16 | 5.0 MEDIUM | 5.8 MEDIUM |
| A vulnerability in the stream reassembly component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper reassembly of traffic streams. An attacker could exploit this vulnerability by sending crafted streams through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems that would otherwise be blocked. | |||||
| CVE-2019-1877 | 1 Cisco | 1 Enterprise Chat And Email | 2020-10-16 | 4.3 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the HTTP API of Cisco Enterprise Chat and Email could allow an unauthenticated, remote attacker to download files attached through chat sessions. The vulnerability is due to insufficient authentication mechanisms on the file download function of the API. An attacker could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to download files that other users attach through the chat feature. This vulnerability affects versions prior to 12.0(1)ES1. | |||||
| CVE-2019-1734 | 1 Cisco | 94 Firepower 4110, Firepower 4112, Firepower 4115 and 91 more | 2020-10-16 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability in the implementation of a CLI diagnostic command in Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to view sensitive system files that should be restricted. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to incomplete role-based access control (RBAC) verification. An attacker could exploit this vulnerability by authenticating to the device and issuing a specific CLI diagnostic command with crafted user-input parameters. An exploit could allow the attacker to perform an arbitrary read of a file on the device, and the file may contain sensitive information. The attacker needs valid device credentials to exploit this vulnerability. | |||||
| CVE-2019-1976 | 1 Cisco | 2 Industrial Network Director, Network Level Service | 2020-10-16 | 5.0 MEDIUM | 9.8 CRITICAL |
| A vulnerability in the “plug-and-play” services component of Cisco Industrial Network Director (IND) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to improper access restrictions on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to access running configuration information about devices managed by the IND, including administrative credentials. | |||||
| CVE-2019-1939 | 2 Cisco, Microsoft | 2 Webex Teams, Windows | 2020-10-16 | 9.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Webex Teams client for Windows could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. This vulnerability is due to improper restrictions on software logging features used by the application on Windows operating systems. An attacker could exploit this vulnerability by convincing a targeted user to visit a website designed to submit malicious input to the affected application. A successful exploit could allow the attacker to cause the application to modify files and execute arbitrary commands on the system with the privileges of the targeted user. | |||||
| CVE-2019-1969 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2020-10-16 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name. | |||||
| CVE-2019-1968 | 1 Cisco | 92 Mds 9000, Mds 9100, Mds 9140 and 89 more | 2020-10-16 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default. | |||||
| CVE-2019-1965 | 1 Cisco | 87 7000 10-slot, 7000 18-slot, 7000 4-slot and 84 more | 2020-10-16 | 4.0 MEDIUM | 7.7 HIGH |
| A vulnerability in the Virtual Shell (VSH) session management for Cisco NX-OS Software could allow an authenticated, remote attacker to cause a VSH process to fail to delete upon termination. This can lead to a build-up of VSH processes that overtime can deplete system memory. When there is no system memory available, this can cause unexpected system behaviors and crashes. The vulnerability is due to the VSH process not being properly deleted when a remote management connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly performing a remote management connection to the device and terminating the connection in an unexpected manner. A successful exploit could allow the attacker to cause the VSH processes to fail to delete, which can lead to a system-wide denial of service (DoS) condition. The attacker must have valid user credentials to log in to the device using the remote management connection. | |||||