Filtered by vendor Tp-link
Subscribe
Total
262 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-16119 | 1 Tp-link | 2 Tl-wr1043nd, Tl-wr1043nd Firmware | 2020-08-24 | 9.0 HIGH | 7.2 HIGH |
| Stack-based buffer overflow in the httpd server of TP-Link WR1043nd (Firmware Version 3) allows remote attackers to execute arbitrary code via a malicious MediaServer request to /userRpm/MediaServerFoldersCfgRpm.htm. | |||||
| CVE-2018-17012 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for hosts_info set_block_flag up_limit. | |||||
| CVE-2018-17009 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wireless wlan_host_2g isolate. | |||||
| CVE-2018-17008 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wireless wlan_host_2g power. | |||||
| CVE-2018-17013 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for protocol wan wan_rate. | |||||
| CVE-2019-12103 | 1 Tp-link | 2 M7350, M7350 Firmware | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by a pre-authentication command injection vulnerability. | |||||
| CVE-2017-8217 | 1 Tp-link | 4 C2, C20i, C20i Firmware and 1 more | 2020-08-24 | 5.0 MEDIUM | 5.3 MEDIUM |
| TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n have too permissive iptables rules, e.g., SNMP is not blocked on any interface. | |||||
| CVE-2018-17014 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for ip_mac_bind name. | |||||
| CVE-2019-13266 | 1 Tp-link | 4 Archer C2 V1, Archer C2 V1 Firmware, Archer C3200 V1 and 1 more | 2020-08-24 | 5.8 MEDIUM | 8.8 HIGH |
| TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be sent cross-router into the 32-bit Transaction ID field. | |||||
| CVE-2019-13267 | 1 Tp-link | 4 Archer C2 V1, Archer C2 V1 Firmware, Archer C3200 V1 and 1 more | 2020-08-24 | 5.8 MEDIUM | 8.8 HIGH |
| TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. In order to transfer data from the host network to the guest network, the sender joins and then leaves an IGMP group. After it leaves, the router (following the IGMP protocol) creates an IGMP Membership Query packet with the Group IP and sends it to both the Host and the Guest networks. The data is transferred within the Group IP field, which is completely controlled by the sender. | |||||
| CVE-2018-17010 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wireless wlan_host_2g bandwidth. | |||||
| CVE-2019-13613 | 1 Tp-link | 2 Archer C1200, Archer C1200 Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| CMD_FTEST_CONFIG in the TP-Link Device Debug protocol in TP-Link Wireless Router Archer Router version 1.0.0 Build 20180502 rel.45702 (EU) and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server. | |||||
| CVE-2019-13614 | 1 Tp-link | 2 Archer C1200, Archer C1200 Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| CMD_SET_CONFIG_COUNTRY in the TP-Link Device Debug protocol in TP-Link Archer C1200 1.0.0 Build 20180502 rel.45702 and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server. | |||||
| CVE-2018-17015 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for ddns phddns username. | |||||
| CVE-2018-17016 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for reboot_timer name. | |||||
| CVE-2018-17017 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for dhcpd udhcpd enable. | |||||
| CVE-2018-17018 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for time_switch name. | |||||
| CVE-2018-17004 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wlan_access name. | |||||
| CVE-2019-15060 | 1 Tp-link | 2 Tl-wr840n, Tl-wr840n Firmware | 2020-08-24 | 6.5 MEDIUM | 8.8 HIGH |
| The traceroute function on the TP-Link TL-WR840N v4 router with firmware through 0.9.1 3.16 is vulnerable to remote code execution via a crafted payload in an IP address input field. | |||||
| CVE-2018-17005 | 1 Tp-link | 2 Tl-wr886n, Tl-wr886n Firmware | 2020-08-24 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for firewall dmz enable. | |||||