Filtered by vendor Juniper
Subscribe
Total
726 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-2312 | 1 Juniper | 1 Junos | 2019-10-02 | 6.8 MEDIUM | 6.5 MEDIUM |
| On Juniper Networks devices running Junos OS affected versions and with LDP enabled, a specific LDP packet destined to the RE (Routing Engine) will consume a small amount of the memory allocated for the rpd (routing protocol daemon) process. Over time, repeatedly receiving this type of LDP packet(s) will cause the memory to exhaust and the rpd process to crash and restart. It is not possible to free up the memory that has been consumed without restarting the rpd process. This issue affects Junos OS based devices with either IPv4 or IPv6 LDP enabled via the [protocols ldp] configuration (the native IPv6 support for LDP is available in Junos OS 16.1 and higher). The interface on which the packet arrives needs to have LDP enabled. The affected Junos versions are: 13.3 prior to 13.3R10; 14.1 prior to 14.1R8; 14.2 prior to 14.2R7-S6 or 14.2R8; 15.1 prior to 15.1F2-S14, 15.1F6-S4, 15.1F7, 15.1R4-S7, 15.1R5; 15.1X49 before 15.1X49-D70; 15.1X53 before 15.1X53-D230, 15.1X53-D63, 15.1X53-D70; 16.1 before 16.1R2. 16.2R1 and all subsequent releases have a resolution for this vulnerability. | |||||
| CVE-2017-2311 | 1 Juniper | 1 Junos Space | 2019-10-02 | 5.0 MEDIUM | 5.3 MEDIUM |
| On Juniper Networks Junos Space versions prior to 16.1R1, an unauthenticated remote attacker with network access to Junos space device can easily create a denial of service condition. | |||||
| CVE-2017-2310 | 1 Juniper | 1 Junos Space | 2019-10-02 | 5.0 MEDIUM | 5.3 MEDIUM |
| A firewall bypass vulnerability in the host based firewall of Juniper Networks Junos Space versions prior to 16.1R1 may permit certain crafted packets, representing a network integrity risk. | |||||
| CVE-2017-2306 | 1 Juniper | 1 Junos Space | 2019-10-02 | 6.5 MEDIUM | 8.8 HIGH |
| On Juniper Networks Junos Space versions prior to 16.1R1, due to an insufficient authorization check, readonly users on the Junos Space administrative web interface can execute code on the device. | |||||
| CVE-2017-2305 | 1 Juniper | 1 Junos Space | 2019-10-02 | 6.5 MEDIUM | 8.8 HIGH |
| On Juniper Networks Junos Space versions prior to 16.1R1, due to an insufficient authorization check, readonly users on the Junos Space administrative web interface can create privileged users, allowing privilege escalation. | |||||
| CVE-2017-2303 | 1 Juniper | 1 Junos | 2019-10-02 | 7.8 HIGH | 7.5 HIGH |
| On Juniper Networks products or platforms running Junos OS 12.1X46 prior to 12.1X46-D50, 12.1X47 prior to 12.1X47-D40, 12.3 prior to 12.3R13, 12.3X48 prior to 12.3X48-D30, 13.2X51 prior to 13.2X51-D40, 13.3 prior to 13.3R10, 14.1 prior to 14.1R8, 14.1X53 prior to 14.1X53-D35, 14.1X55 prior to 14.1X55-D35, 14.2 prior to 14.2R5, 15.1 prior to 15.1F6 or 15.1R3, 15.1X49 prior to 15.1X49-D30 or 15.1X49-D40, 15.1X53 prior to 15.1X53-D35, and where RIP is enabled, certain RIP advertisements received by the router may cause the RPD daemon to crash resulting in a denial of service condition. | |||||
| CVE-2017-2302 | 1 Juniper | 1 Junos | 2019-10-02 | 7.8 HIGH | 7.5 HIGH |
| On Juniper Networks products or platforms running Junos OS 12.1X46 prior to 12.1X46-D55, 12.1X47 prior to 12.1X47-D45, 12.3R13 prior to 12.3R13, 12.3X48 prior to 12.3X48-D35, 13.3 prior to 13.3R10, 14.1 prior to 14.1R8, 14.1X53 prior to 14.1X53-D40, 14.1X55 prior to 14.1X55-D35, 14.2 prior to 14.2R6, 15.1 prior to 15.1F2 or 15.1R1, 15.1X49 prior to 15.1X49-D20 where the BGP add-path feature is enabled with 'send' option or with both 'send' and 'receive' options, a network based attacker can cause the Junos OS rpd daemon to crash and restart. Repeated crashes of the rpd daemon can result in an extended denial of service condition. | |||||
| CVE-2017-2300 | 1 Juniper | 1 Junos | 2019-10-02 | 5.0 MEDIUM | 7.5 HIGH |
| On Juniper Networks SRX Series Services Gateways chassis clusters running Junos OS 12.1X46 prior to 12.1X46-D65, 12.3X48 prior to 12.3X48-D40, 12.3X48 prior to 12.3X48-D60, flowd daemon on the primary node of an SRX Series chassis cluster may crash and restart when attempting to synchronize a multicast session created via crafted multicast packets. | |||||
| CVE-2017-2315 | 1 Juniper | 1 Junos | 2019-10-02 | 7.8 HIGH | 7.5 HIGH |
| On Juniper Networks EX Series Ethernet Switches running affected Junos OS versions, a vulnerability in IPv6 processing has been discovered that may allow a specially crafted IPv6 Neighbor Discovery (ND) packet destined to an EX Series Ethernet Switch to cause a slow memory leak. A malicious network-based packet flood of these crafted IPv6 NDP packets may eventually lead to resource exhaustion and a denial of service. The affected Junos OS versions are: 12.3 prior to 12.3R12-S4, 12.3R13; 13.3 prior to 13.3R10; 14.1 prior to 14.1R8-S3, 14.1R9; 14.1X53 prior ro 14.1X53-D12, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R6-S4, 14.2R7-S6, 14.2R8; 15.1 prior to 15.1R5; 16.1 before 16.1R3; 16.2 before 16.2R1-S3, 16.2R2. 17.1R1 and all subsequent releases have a resolution for this vulnerability. | |||||
| CVE-2013-6014 | 1 Juniper | 1 Junos | 2019-09-27 | 6.1 MEDIUM | 9.3 CRITICAL |
| Juniper Junos 10.4 before 10.4S15, 11.4 before 11.4R9, 11.4X27 before 11.4X27.44, 12.1 before 12.1R7, 12.1X44 before 12.1X44-D20, 12.1X45 before 12.1X45-D15, 12.2 before 12.2R6, 12.3 before 12.3R3, 13.1 before 13.1R3, and 13.2 before 13.2R1, when Proxy ARP is enabled on an unnumbered interface, allows remote attackers to perform ARP poisoning attacks and possibly obtain sensitive information via a crafted ARP message. | |||||
| CVE-2016-1276 | 1 Juniper | 1 Junos | 2019-06-26 | 7.1 HIGH | 5.9 MEDIUM |
| Juniper Junos OS before 12.1X46-D50, 12.1X47 before 12.1X47-D23, 12.3X48 before 12.3X48-D25, and 15.1X49 before 15.1X49-D40 on a High-End SRX-Series chassis system with one or more Application Layer Gateways (ALGs) enabled allow remote attackers to cause a denial of service (CPU consumption, fab link failure, or flip-flop failovers) via vectors related to in-transit traffic matching ALG rules. | |||||
| CVE-2017-2304 | 1 Juniper | 7 Ex4300, Ex4600, Junos and 4 more | 2019-05-10 | 5.0 MEDIUM | 7.5 HIGH |
| Juniper Networks QFX3500, QFX3600, QFX5100, QFX5200, EX4300 and EX4600 devices running Junos OS 14.1X53 prior to 14.1X53-D40, 15.1X53 prior to 15.1X53-D40, 15.1 prior to 15.1R2, do not pad Ethernet packets with zeros, and thus some packets can contain fragments of system memory or data from previous packets. This issue is also known as 'Etherleak' | |||||
| CVE-2019-0033 | 1 Juniper | 14 Junos, Srx100, Srx110 and 11 more | 2019-04-12 | 5.0 MEDIUM | 7.5 HIGH |
| A firewall bypass vulnerability in the proxy ARP service of Juniper Networks Junos OS allows an attacker to cause a high CPU condition leading to a Denial of Service (DoS). This issue affects only IPv4. Affected releases are Juniper Networks Junos OS: 12.1X46 versions above and including 12.1X46-D25 prior to 12.1X46-D71, 12.1X46-D73 on SRX Series; 12.3X48 versions prior to 12.3X48-D50 on SRX Series; 15.1X49 versions prior to 15.1X49-D75 on SRX Series. | |||||
| CVE-2008-0960 | 6 Cisco, Ecos Sourceware, Ingate and 3 more | 25 Ace 10 6504 Bundle With 4 Gbps Throughput, Ace 10 6509 Bundle With 8 Gbps Throughput, Ace 10 Service Module and 22 more | 2018-10-30 | 10.0 HIGH | N/A |
| SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte. | |||||
| CVE-2004-0230 | 6 Juniper, Mcafee, Netbsd and 3 more | 7 Junos, Network Data Loss Prevention, Netbsd and 4 more | 2018-10-19 | 5.0 MEDIUM | N/A |
| TCP, when using a large Window Size, makes it easier for remote attackers to guess sequence numbers and cause a denial of service (connection loss) to persistent TCP connections by repeatedly injecting a TCP RST packet, especially in protocols that use long-lived connections, such as BGP. | |||||
| CVE-2006-3567 | 1 Juniper | 1 Dx | 2018-10-18 | 4.3 MEDIUM | N/A |
| Cross-site scripting (XSS) vulnerability in the web administration interface logging feature in Juniper Networks (Redline) DX 5.1.x, and possibly earlier versions, allows remote attackers to inject arbitrary web script or HTML via the username login field. | |||||
| CVE-2006-2086 | 1 Juniper | 1 Junipersetup Control | 2018-10-18 | 7.5 HIGH | N/A |
| Buffer overflow in JuniperSetupDLL.dll, loaded from JuniperSetup.ocx by the Juniper SSL-VPN Client when accessing a Juniper NetScreen IVE device running IVE OS before 4.2r8.1, 5.0 before 5.0r6.1, 5.1 before 5.1r8, 5.2 before 5.2r4.1, or 5.3 before 5.3r2.1, allows remote attackers to execute arbitrary code via a long argument in the ProductName parameter. | |||||
| CVE-2008-1180 | 1 Juniper | 1 Secure Access 2000 | 2018-10-11 | 4.3 MEDIUM | N/A |
| Cross-site scripting (XSS) vulnerability in dana-na/auth/rdremediate.cgi in Juniper Networks Secure Access 2000 5.5 R1 build 11711 allows remote attackers to inject arbitrary web script or HTML via the delivery_mode parameter. | |||||
| CVE-2008-1181 | 1 Juniper | 1 Secure Access 2000 | 2018-10-11 | 5.0 MEDIUM | N/A |
| Juniper Networks Secure Access 2000 5.5 R1 (build 11711) allows remote attackers to obtain sensitive information via a direct request for remediate.cgi without certain parameters, which reveals the path in an "Execute failed" error message. | |||||
| CVE-2010-2289 | 1 Juniper | 1 Secure Access | 2018-10-10 | 4.3 MEDIUM | N/A |
| Open redirect vulnerability in dana/home/homepage.cgi in Juniper Networks IVE 6.5R1 (Build 14599) and 6.5R2 (Build 14951) allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a URL in the Location parameter. | |||||