Total
22706 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-12189 | 1 Redhat | 2 Enterprise Linux, Jboss Enterprise Application Platform | 2019-10-09 | 4.6 MEDIUM | 7.8 HIGH |
| It was discovered that the jboss init script as used in Red Hat JBoss Enterprise Application Platform 7.0.7.GA performed unsafe file handling which could result in local privilege escalation. This issue is a result of an incomplete fix for CVE-2016-8656. | |||||
| CVE-2017-12219 | 1 Cisco | 22 Spa 301, Spa 301 Firmware, Spa 303 and 19 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the handling of IP fragments for the Cisco Small Business SPA300, SPA500, and SPA51x Series IP Phones could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to the inability to handle many large IP fragments for reassembly in a short duration. An attacker could exploit this vulnerability by sending a crafted stream of IP fragments to the targeted device. An exploit could allow the attacker to cause a DoS condition when the device unexpectedly reloads. Cisco Bug IDs: CSCve82586. | |||||
| CVE-2017-12232 | 1 Cisco | 1 Ios | 2019-10-09 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the implementation of a protocol in Cisco Integrated Services Routers Generation 2 (ISR G2) Routers running Cisco IOS 15.0 through 15.6 could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a misclassification of Ethernet frames. An attacker could exploit this vulnerability by sending a crafted Ethernet frame to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc03809. | |||||
| CVE-2017-12268 | 1 Cisco | 1 Anyconnect Secure Mobility Client | 2019-10-09 | 2.1 LOW | 6.5 MEDIUM |
| A vulnerability in the Network Access Manager (NAM) of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker to enable multiple network adapters, aka a Dual-Homed Interface vulnerability. The vulnerability is due to insufficient NAM policy enforcement. An attacker could exploit this vulnerability by manipulating network interfaces of the device to allow multiple active network interfaces. A successful exploit could allow the attacker to send traffic over a non-authorized network interface. Cisco Bug IDs: CSCvf66539. | |||||
| CVE-2017-11480 | 1 Elasticsearch | 1 Packetbeat | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| Packetbeat versions prior to 5.6.4 are affected by a denial of service flaw in the PostgreSQL protocol handler. If Packetbeat is listening for PostgreSQL traffic and a user is able to send arbitrary network traffic to the monitored port, the attacker could prevent Packetbeat from properly logging other PostgreSQL traffic. | |||||
| CVE-2017-12231 | 1 Cisco | 1 Ios | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the implementation of Network Address Translation (NAT) functionality in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper translation of H.323 messages that use the Registration, Admission, and Status (RAS) protocol and are sent to an affected device via IPv4 packets. An attacker could exploit this vulnerability by sending a crafted H.323 RAS packet through an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to use an application layer gateway with NAT (NAT ALG) for H.323 RAS messages. By default, a NAT ALG is enabled for H.323 RAS messages. Cisco Bug IDs: CSCvc57217. | |||||
| CVE-2017-12211 | 1 Cisco | 2 Ios, Ios Xe | 2019-10-09 | 6.3 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640. | |||||
| CVE-2017-12256 | 1 Cisco | 1 Wide Area Application Services | 2019-10-09 | 7.1 HIGH | 6.5 MEDIUM |
| A vulnerability in the Akamai Connect feature of Cisco Wide Area Application Services (WAAS) Appliances could allow an unauthenticated, remote attacker to cause a denial-of-service (DoS) condition on an affected device. The vulnerability is due to certain file-handling inefficiencies of the affected system. An attacker could exploit this vulnerability by directing client systems to access a corrupted file that the client systems cannot decompress correctly. A successful exploit could allow the attacker to cause the affected device to crash or hang unexpectedly and result in a DoS condition that may require manual intervention to regain normal operating conditions. Cisco Bug IDs: CSCve82472. | |||||
| CVE-2017-10845 | 1 Nttdocomo | 2 Wi-fi Station L-02f, Wi-fi Station L-02f Firmware | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| Wi-Fi STATION L-02F Software version V10g and earlier allows remote attackers to access the device with administrative privileges and perform unintended operations through a backdoor account. | |||||
| CVE-2017-0909 | 1 Private Address Check Project | 1 Private Address Check | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| The private_address_check ruby gem before 0.4.1 is vulnerable to a bypass due to an incomplete blacklist of common private/local network addresses used to prevent server-side request forgery. | |||||
| CVE-2017-10607 | 1 Juniper | 1 Junos | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| Juniper Networks Junos OS 16.1R1, and services releases based off of 16.1R1, are vulnerable to the receipt of a crafted BGP Protocol Data Unit (PDU) sent directly to the router, which can cause the RPD routing process to crash and restart. Unlike BGP UPDATEs, which are transitive in nature, this issue can only be triggered by a packet sent directly to the IP address of the router. Repeated crashes of the rpd daemon can result in an extended denial of service condition. This issue only affects devices running Junos OS 16.1R1 and services releases based off of 16.1R1 (e.g. 16.1R1-S1, 16.1R1-S2, 16.1R1-S3). No prior versions of Junos OS are affected by this vulnerability, and this issue was resolved in Junos OS 16.2 prior to 16.2R1. No other Juniper Networks products or platforms are affected by this issue. This issue was found during internal product security testing. | |||||
| CVE-2017-10611 | 1 Juniper | 15 Ex2200, Ex3300, Junos and 12 more | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
| If extended statistics are enabled via 'set chassis extended-statistics', when executing any operation that fetches interface statistics, including but not limited to SNMP GET requests, the pfem process or the FPC may crash and restart. Repeated crashes of PFE processing can result in an extended denial of service condition. This issue only affects the following platforms: (1) EX2200, EX3300, XRE200 (2) MX Series routers with MPC7E/8E/9E PFEs installed, and only if 'extended-statistics' are enabled under the [edit chassis] configuration. Affected releases are Juniper Networks Junos OS 14.1 prior to 14.1R8-S5, 14.1R9 on MX Series; 14.1X53 prior to 14.1X53-D46, 14.1X53-D50 on EX2200, EX3300, XRE200; 14.2 prior to 14.2R7-S9, 14.2R8 on MX Series; 15.1 prior to 15.1F5-S8, 15.1F6-S8, 15.1R5-S3, 15.1R6 on MX Series; 16.1 prior to 16.1R4-S5, 16.1R5, 16.1R6 on MX Series; 16.1X65 prior to 16.1X65-D45 on EX2200, EX3300, XRE200; 16.2 prior to 16.2R2-S1, 16.2R3 on MX Series; 17.1 prior to 17.1R2-S2, 17.1R3 on MX Series; 17.2 prior to 17.2R1-S3, 17.2R2 on MX Series; 17.2X75 prior to 17.2X75-D50 on MX Series; 17.3 prior to 17.3R1-S1, 17.3R2 on MX Series. No other Juniper Networks products or platforms are affected by this issue. | |||||
| CVE-2017-1002102 | 1 Kubernetes | 1 Kubernetes | 2019-10-09 | 6.3 MEDIUM | 5.6 MEDIUM |
| In Kubernetes versions 1.3.x, 1.4.x, 1.5.x, 1.6.x and prior to versions 1.7.14, 1.8.9 and 1.9.4 containers using a secret, configMap, projected or downwardAPI volume can trigger deletion of arbitrary files/directories from the nodes where they are running. | |||||
| CVE-2017-10606 | 1 Juniper | 5 Srx300, Srx320, Srx340 and 2 more | 2019-10-09 | 2.1 LOW | 4.4 MEDIUM |
| Version 4.40 of the TPM (Trusted Platform Module) firmware on Juniper Networks SRX300 Series has a weakness in generating cryptographic keys that may allow an attacker to decrypt sensitive information in SRX300 Series products. The TPM is used in the SRX300 Series to encrypt sensitive configuration data. While other products also ship with a TPM, no other products or platforms are affected by this vulnerability. Customers can confirm the version of TPM firmware via the 'show security tpm status' command. This issue was discovered by an external security researcher. No other Juniper Networks products or platforms are affected by this issue. | |||||
| CVE-2017-10618 | 1 Juniper | 1 Junos | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
| When the 'bgp-error-tolerance' feature â€" designed to help mitigate remote session resets from malformed path attributes â€" is enabled, a BGP UPDATE containing a specifically crafted set of transitive attributes can cause the RPD routing process to crash and restart. Devices with BGP enabled that do not have 'bgp-error-tolerance' configured are not vulnerable to this issue. Affected releases are Juniper Networks Junos OS 13.3 prior to 13.3R10-S2; 14.1 prior to 14.1R8-S4, 14.1R9; 14.1X50 prior to 14.1X50-D185; 14.1X53 prior to 14.1X53-D45, 14.1X53-D50; 14.2 prior to 14.2R7-S7, 14.2R8; 15.1 prior to 15.1F5-S8, 15.1F6-S7, 15.1R5-S6, 15.1R6-S2, 15.1R7; 15.1X49 prior to 15.1X49-D100; 15.1X53 prior to 15.1X53-D64, 15.1X53-D70; 16.1 prior to 16.1R3-S4, 16.1R4-S3, 16.1R5; 16.2 prior to 16.2R1-S5, 16.2R2; 17.1 prior to 17.1R1-S3, 17.1R2; 17.2 prior to 17.2R1-S2, 17.2R2; 17.2X75 prior to 17.2X75-D50. No other Juniper Networks products or platforms are affected by this issue. | |||||
| CVE-2017-10619 | 1 Juniper | 7 Junos, Srx1400, Srx3400 and 4 more | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| When Express Path (formerly known as service offloading) is configured on Juniper Networks SRX1400, SRX3400, SRX3600, SRX5400, SRX5600, SRX5800 in high availability cluster configuration mode, certain multicast packets might cause the flowd process to crash, halting or interrupting traffic from flowing through the device and triggering RG1+ (data-plane) fail-over to the secondary node. Repeated crashes of the flowd process may constitute an extended denial of service condition. This service is not enabled by default and is only supported in high-end SRX platforms. Affected releases are Juniper Networks Junos OS 12.3X48 prior to 12.3X48-D45, 15.1X49 prior to 15.1X49-D80 on SRX1400, SRX3400, SRX3600, SRX5400, SRX5600, SRX5800. | |||||
| CVE-2015-2113 | 1 Hp | 9 Easy Tools, T510, T520 and 6 more | 2019-10-09 | 10.0 HIGH | N/A |
| Unspecified vulnerability in HP Easy Deploy, as distributed standalone and in HP Easy Tools before 3.0.1.1650, on HP Thin Client t5540, t5740, and t5740e devices and HP Flexible Thin Client t510, t520, t610, t620, and t820 devices allows remote attackers to execute arbitrary code via unknown vectors. | |||||
| CVE-2015-2112 | 1 Hp | 9 Easy Tools, T510, T520 and 6 more | 2019-10-09 | 9.0 HIGH | N/A |
| Unspecified vulnerability in HP Easy Deploy, as distributed standalone and in HP Easy Tools before 3.0.1.1650, on HP Thin Client t5540, t5740, and t5740e devices and HP Flexible Thin Client t510, t520, t610, t620, and t820 devices allows remote authenticated users to execute arbitrary code via unknown vectors. | |||||
| CVE-2015-2118 | 1 Hp | 1 Access Control | 2019-10-09 | 4.0 MEDIUM | N/A |
| Unspecified vulnerability in the Secure Pull Print and Security Pull Print components in HP Access Control (AC) Software 12.x through 14.x before 14.1.2 allows remote authenticated users to obtain sensitive information via unknown vectors. | |||||
| CVE-2014-7893 | 1 Hp | 6 Hybrid Pos Printer With Micr Us Fk184aa, Ole Point Of Sale Driver, Pusb Thermal Receipt Printer F7m67aa and 3 more | 2019-10-09 | 10.0 HIGH | N/A |
| The OLE Point of Sale (OPOS) drivers before 1.13.003 on HP Point of Sale Windows PCs allow remote attackers to execute arbitrary code via vectors involving OPOSCheckScanner.ocx for PUSB Thermal Receipt printers, SerialUSB Thermal Receipt printers, Hybrid POS printers with MICR, Value PUSB Receipt printers, and Value Serial/USB Receipt printers, aka ZDI-CAN-2507. | |||||