Total
1397 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2016-9044 | 1 Informationbuilders | 1 Webfocus | 2022-12-14 | 9.0 HIGH | 8.8 HIGH |
| An exploitable command execution vulnerability exists in Information Builders WebFOCUS Business Intelligence Portal 8.1 . A specially crafted web parameter can cause a command injection. An authenticated attacker can send a crafted web request to trigger this vulnerability. | |||||
| CVE-2022-37897 | 1 Arubanetworks | 2 Arubaos, Sd-wan | 2022-12-13 | N/A | 9.8 CRITICAL |
| There is a command injection vulnerability that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks AP management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. | |||||
| CVE-2022-37912 | 1 Arubanetworks | 2 Arubaos, Sd-wan | 2022-12-13 | N/A | 8.8 HIGH |
| Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system. | |||||
| CVE-2022-4364 | 1 Flir | 2 Flir Ax8, Flir Ax8 Firmware | 2022-12-12 | N/A | 9.8 CRITICAL |
| A vulnerability classified as critical has been found in Teledyne FLIR AX8 up to 1.46.16. Affected is an unknown function of the file palette.php of the component Web Service Handler. The manipulation of the argument palette leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-215118 is the identifier assigned to this vulnerability. | |||||
| CVE-2022-41800 | 1 F5 | 11 Big-ip Access Policy Manager, Big-ip Advanced Firewall Manager, Big-ip Analytics and 8 more | 2022-12-12 | N/A | 8.7 HIGH |
| In all versions of BIG-IP, when running in Appliance mode, an authenticated user assigned the Administrator role may be able to bypass Appliance mode restrictions, utilizing an undisclosed iControl REST endpoint. A successful exploit can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | |||||
| CVE-2022-30079 | 1 Netgear | 1 R6200 | 2022-12-09 | N/A | 8.8 HIGH |
| Command injection vulnerability was discovered in Netgear R6200 v2 firmware through R6200v2-V1.0.3.12 via binary /sbin/acos_service that could allow remote authenticated attackers the ability to modify values in the vulnerable parameter. | |||||
| CVE-2022-46333 | 1 Proofpoint | 1 Enterprise Protection | 2022-12-09 | N/A | 7.2 HIGH |
| The admin user interface in Proofpoint Enterprise Protection (PPS/PoD) contains a command injection vulnerability that enables an admin to execute commands beyond their allowed scope. This affects all versions 8.19.0 and below. | |||||
| CVE-2022-45506 | 1 Tenda | 2 W30e, W30e Firmware | 2022-12-09 | N/A | 9.8 CRITICAL |
| Tenda W30E v1.0.1.25(633) was discovered to contain a command injection vulnerability via the fileNameMit parameter at /goform/delFileName. | |||||
| CVE-2022-45497 | 1 Tenda | 2 W6-s, W6-s Firmware | 2022-12-09 | N/A | 9.8 CRITICAL |
| Tenda W6-S v1.0.0.4(510) was discovered to contain a command injection vulnerability in the tpi_get_ping_output function at /goform/exeCommand. | |||||
| CVE-2022-45025 | 1 Markdown Preview Enhanced Project | 1 Markdown Preview Enhanced | 2022-12-08 | N/A | 9.8 CRITICAL |
| Markdown Preview Enhanced v0.6.5 and v0.19.6 for VSCode and Atom was discovered to contain a command injection vulnerability via the PDF file import function. | |||||
| CVE-2022-3086 | 1 Moxa | 100 Uc-2101-lx, Uc-2101-lx Firmware, Uc-2102-lx and 97 more | 2022-12-07 | N/A | 7.6 HIGH |
| Cradlepoint IBR600 NCOS versions 6.5.0.160bc2e and prior are vulnerable to shell escape, which enables local attackers with non-superuser credentials to gain full, unrestrictive shell access which may allow an attacker to execute arbitrary code. | |||||
| CVE-2022-25912 | 1 Simple-git Project | 1 Simple-git | 2022-12-07 | N/A | 9.8 CRITICAL |
| The package simple-git before 3.15.0 are vulnerable to Remote Code Execution (RCE) when enabling the ext transport protocol, which makes it exploitable via clone() method. This vulnerability exists due to an incomplete fix of [CVE-2022-24066](https://security.snyk.io/vuln/SNYK-JS-SIMPLEGIT-2434306). | |||||
| CVE-2022-26945 | 1 Hashicorp | 1 Go-getter | 2022-12-06 | 7.5 HIGH | 9.8 CRITICAL |
| go-getter up to 1.5.11 and 2.0.2 allowed protocol switching, endless redirect, and configuration bypass via abuse of custom HTTP response header processing. Fixed in 1.6.1 and 2.1.0. | |||||
| CVE-2022-46169 | 1 Cacti | 1 Cacti | 2022-12-06 | N/A | 9.8 CRITICAL |
| Cacti is an open source platform which provides a robust and extensible operational monitoring and fault management framework for users. In affected versions a command injection vulnerability allows an unauthenticated user to execute arbitrary code on a server running Cacti, if a specific data source was selected for any monitored device. The vulnerability resides in the `remote_agent.php` file. This file can be accessed without authentication. This function retrieves the IP address of the client via `get_client_addr` and resolves this IP address to the corresponding hostname via `gethostbyaddr`. After this, it is verified that an entry within the `poller` table exists, where the hostname corresponds to the resolved hostname. If such an entry was found, the function returns `true` and the client is authorized. This authorization can be bypassed due to the implementation of the `get_client_addr` function. The function is defined in the file `lib/functions.php` and checks serval `$_SERVER` variables to determine the IP address of the client. The variables beginning with `HTTP_` can be arbitrarily set by an attacker. Since there is a default entry in the `poller` table with the hostname of the server running Cacti, an attacker can bypass the authentication e.g. by providing the header `Forwarded-For: <TARGETIP>`. This way the function `get_client_addr` returns the IP address of the server running Cacti. The following call to `gethostbyaddr` will resolve this IP address to the hostname of the server, which will pass the `poller` hostname check because of the default entry. After the authorization of the `remote_agent.php` file is bypassed, an attacker can trigger different actions. One of these actions is called `polldata`. The called function `poll_for_data` retrieves a few request parameters and loads the corresponding `poller_item` entries from the database. If the `action` of a `poller_item` equals `POLLER_ACTION_SCRIPT_PHP`, the function `proc_open` is used to execute a PHP script. The attacker-controlled parameter `$poller_id` is retrieved via the function `get_nfilter_request_var`, which allows arbitrary strings. This variable is later inserted into the string passed to `proc_open`, which leads to a command injection vulnerability. By e.g. providing the `poller_id=;id` the `id` command is executed. In order to reach the vulnerable call, the attacker must provide a `host_id` and `local_data_id`, where the `action` of the corresponding `poller_item` is set to `POLLER_ACTION_SCRIPT_PHP`. Both of these ids (`host_id` and `local_data_id`) can easily be bruteforced. The only requirement is that a `poller_item` with an `POLLER_ACTION_SCRIPT_PHP` action exists. This is very likely on a productive instance because this action is added by some predefined templates like `Device - Uptime` or `Device - Polling Time`. This command injection vulnerability allows an unauthenticated user to execute arbitrary commands if a `poller_item` with the `action` type `POLLER_ACTION_SCRIPT_PHP` (`2`) is configured. The authorization bypass should be prevented by not allowing an attacker to make `get_client_addr` (file `lib/functions.php`) return an arbitrary IP address. This could be done by not honoring the `HTTP_...` `$_SERVER` variables. If these should be kept for compatibility reasons it should at least be prevented to fake the IP address of the server running Cacti. This vulnerability has been addressed in both the 1.2.x and 1.3.x release branches with `1.2.23` being the first release containing the patch. | |||||
| CVE-2022-44928 | 1 D-link | 2 Dvg-g5402sp, Dvg-g5402sp Firmware | 2022-12-05 | N/A | 9.8 CRITICAL |
| D-Link DVG-G5402SP GE_1.03 was discovered to contain a command injection vulnerability via the Maintenance function. | |||||
| CVE-2022-44930 | 1 D-link | 2 Dhp-w310av, Dhp-w310av Firmware | 2022-12-05 | N/A | 9.8 CRITICAL |
| D-Link DHP-W310AV 3.10EU was discovered to contain a command injection vulnerability via the System Checks function. | |||||
| CVE-2019-3920 | 1 Nokia | 2 I-240w-q Gpon Ont, I-240w-q Gpon Ont Firmware | 2022-12-03 | 6.5 MEDIUM | 8.8 HIGH |
| The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to authenticated command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/device_Form?script/. | |||||
| CVE-2019-3919 | 1 Nokia | 2 I-240w-q Gpon Ont, I-240w-q Gpon Ont Firmware | 2022-12-03 | 6.5 MEDIUM | 8.8 HIGH |
| The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/usb_restore_Form?script/. | |||||
| CVE-2021-26728 | 1 Lannerinc | 2 Iac-ast2500a, Iac-ast2500a Firmware | 2022-12-03 | N/A | 9.8 CRITICAL |
| Command injection and stack-based buffer overflow vulnerabilities in the KillDupUsr_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0. | |||||
| CVE-2021-26729 | 1 Lannerinc | 2 Iac-ast2500a, Iac-ast2500a Firmware | 2022-12-03 | N/A | 9.8 CRITICAL |
| Command injection and multiple stack-based buffer overflows vulnerabilities in the Login_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0. | |||||