Total
476 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-33450 | 1 Nasm | 1 Netwide Assembler | 2022-08-02 | N/A | 5.5 MEDIUM |
| An issue was discovered in NASM version 2.16rc0. There are memory leaks in nasm_calloc() in nasmlib/alloc.c. | |||||
| CVE-2021-33452 | 1 Nasm | 1 Netwide Assembler | 2022-08-02 | N/A | 5.5 MEDIUM |
| An issue was discovered in NASM version 2.16rc0. There are memory leaks in nasm_malloc() in nasmlib/alloc.c. | |||||
| CVE-2021-33451 | 1 Long Range Zip Project | 1 Long Range Zip | 2022-08-01 | N/A | 5.5 MEDIUM |
| An issue was discovered in lrzip version 0.641. There are memory leaks in fill_buffer() in stream.c. | |||||
| CVE-2022-22209 | 1 Juniper | 1 Junos | 2022-07-29 | N/A | 7.5 HIGH |
| A Missing Release of Memory after Effective Lifetime vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause a Denial of Service (DoS). On all Junos platforms, the Kernel Routing Table (KRT) queue can get stuck due to a memory leak triggered by interface flaps or route churn leading to RIB and PFEs getting out of sync. The memory leak causes RTNEXTHOP/route and next-hop memory pressure issue and the KRT queue will eventually get stuck with the error- 'ENOMEM -- Cannot allocate memory'. The out-of-sync state between RIB and FIB can be seen with the "show route" and "show route forwarding-table" command. This issue will lead to failures for adding new routes. The KRT queue status can be checked using the CLI command "show krt queue": user@host > show krt state High-priority add queue: 1 queued ADD nhtype Router index 0 (31212) error 'ENOMEM -- Cannot allocate memory' kqp '0x8ad5e40' The following messages will be observed in /var/log/messages, which indicate high memory for routes/nexthops: host rpd[16279]: RPD_RT_HWM_NOTICE: New RIB highwatermark for routes: 266 [2022-03-04 05:06:07] host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host kernel: rts_veto_net_delayed_unref_limit: Route/nexthop memory is severe pressure. User Application to perform recovery actions. O p 8 err 12, rtsm_id 0:-1, msg type 10, veto simulation: 0. host kernel: rts_veto_net_delayed_unref_limit: Memory usage of M_RTNEXTHOP type = (806321208) Max size possible for M_RTNEXTHOP type = (689432176) Current delayed unref = (0), Max delayed unref on this platform = (120000) Current delayed weight unref = (0) Max delayed weight unref on this platform = (400000) curproc = rpd. This issue affects: Juniper Networks Junos OS 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2-S1, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 21.2R1. | |||||
| CVE-2022-22205 | 1 Juniper | 28 Junos, Srx100, Srx110 and 25 more | 2022-07-29 | N/A | 7.5 HIGH |
| A Missing Release of Memory after Effective Lifetime vulnerability in the Application Quality of Experience (appqoe) subsystem of the PFE of Juniper Networks Junos OS on SRX Series allows an unauthenticated network based attacker to cause a Denial of Service (DoS). Upon receiving specific traffic a memory leak will occur. Sustained processing of such specific traffic will eventually lead to an out of memory condition that prevents all services from continuing to function, and requires a manual restart to recover. A device is only vulnerable when advance(d) policy based routing (APBR) is configured and AppQoE (sla rule) is not configured for these APBR rules. This issue affects Juniper Networks Junos OS on SRX Series: 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2-S1, 21.2R3; 21.3 versions prior to 21.3R1-S2, 21.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.3R1. | |||||
| CVE-2021-34598 | 1 Phoenixcontact | 4 Fl Mguard 1102, Fl Mguard 1102 Firmware, Fl Mguard 1105 and 1 more | 2022-07-28 | 4.3 MEDIUM | 7.5 HIGH |
| In Phoenix Contact FL MGUARD 1102 and 1105 in Versions 1.4.0, 1.4.1 and 1.5.0 the remote logging functionality is impaired by the lack of memory release for data structures from syslog-ng when remote logging is active | |||||
| CVE-2022-22204 | 1 Juniper | 45 Junos, Mx10, Mx10000 and 42 more | 2022-07-27 | N/A | 5.3 MEDIUM |
| An Improper Release of Memory Before Removing Last Reference vulnerability in the Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Juniper Networks Junos OS allows unauthenticated network-based attacker to cause a partial Denial of Service (DoS). On all MX and SRX platforms, if the SIP ALG is enabled, receipt of a specific SIP packet will create a stale SIP entry. Sustained receipt of such packets will cause the SIP call table to eventually fill up and cause a DoS for all SIP traffic. The SIP call usage can be monitored by "show security alg sip calls". To be affected the SIP ALG needs to be enabled, either implicitly / by default or by way of configuration. Please verify on SRX with: user@host> show security alg status | match sip SIP : Enabled Please verify on MX whether the following is configured: [ services ... rule <rule-name> (term <term-name>) from/match application/application-set <name> ] where either a. name = junos-sip or an application or application-set refers to SIP: b. [ applications application <name> application-protocol sip ] or c. [ applications application-set <name> application junos-sip ] This issue affects Juniper Networks Junos OS on SRX Series and MX Series: 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R2-S2; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2; 21.4 versions prior to 21.4R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. | |||||
| CVE-2019-20388 | 6 Debian, Fedoraproject, Netapp and 3 more | 31 Debian Linux, Fedora, Baseboard Management Controller H300e and 28 more | 2022-07-25 | 5.0 MEDIUM | 7.5 HIGH |
| xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak. | |||||
| CVE-2021-4135 | 1 Linux | 1 Linux Kernel | 2022-07-20 | N/A | 5.5 MEDIUM |
| A memory leak vulnerability was found in the Linux kernel's eBPF for the Simulated networking device driver in the way user uses BPF for the device such that function nsim_map_alloc_elem being called. A local user could use this flaw to get unauthorized access to some data. | |||||
| CVE-2021-1387 | 1 Cisco | 121 Nexus 3016, Nexus 3016q, Nexus 3048 and 118 more | 2022-07-15 | 4.3 MEDIUM | 8.6 HIGH |
| A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because the software improperly releases resources when it processes certain IPv6 packets that are destined to an affected device. An attacker could exploit this vulnerability by sending multiple crafted IPv6 packets to an affected device. A successful exploit could cause the network stack to run out of available buffers, impairing operations of control plane and management plane protocols and resulting in a DoS condition. Manual intervention would be required to restore normal operations on the affected device. For more information about the impact of this vulnerability, see the Details section of this advisory. | |||||
| CVE-2021-28665 | 1 Stormshield | 1 Network Security | 2022-07-12 | 5.0 MEDIUM | 7.5 HIGH |
| Stormshield SNS with versions before 3.7.18, 3.11.6 and 4.1.6 has a memory-management defect in the SNMP plugin that can lead to excessive consumption of memory and CPU resources, and possibly a denial of service. | |||||
| CVE-2020-22844 | 1 Mikrotik | 1 Routeros | 2022-07-12 | 5.0 MEDIUM | 7.5 HIGH |
| A buffer overflow in Mikrotik RouterOS 6.47 allows unauthenticated attackers to cause a denial of service (DOS) via crafted SMB requests. | |||||
| CVE-2021-3181 | 3 Debian, Fedoraproject, Mutt | 3 Debian Linux, Fedora, Mutt | 2022-07-12 | 4.3 MEDIUM | 6.5 MEDIUM |
| rfc822.c in Mutt through 2.0.4 allows remote attackers to cause a denial of service (mailbox unavailability) by sending email messages with sequences of semicolon characters in RFC822 address fields (aka terminators of empty groups). A small email message from the attacker can cause large memory consumption, and the victim may then be unable to see email messages from other persons. | |||||
| CVE-2021-37205 | 1 Siemens | 95 Simatic Drive Controller Cpu 1504d Tf, Simatic Drive Controller Cpu 1504d Tf Firmware, Simatic Drive Controller Cpu 1507d Tf and 92 more | 2022-07-12 | 7.1 HIGH | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC Drive Controller family (All versions >= V2.9.2 < V2.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions >= V21.9 < V21.9.4), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions >= V4.5.0 < V4.5.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.9.2 < V2.9.4), SIMATIC S7-1500 Software Controller (All versions >= V21.9 < V21.9.4), SIMATIC S7-PLCSIM Advanced (All versions >= V4.0 < V4.0 SP1), TIM 1531 IRC (incl. SIPLUS NET variants) (All versions >= V2.2). An unauthenticated attacker could cause a denial-of-service condition in a PLC when sending specially prepared packets over port 102/tcp. A restart of the affected device is needed to restore normal operations. | |||||
| CVE-2021-41687 | 1 Offis | 1 Dcmtk | 2022-07-06 | 5.0 MEDIUM | 7.5 HIGH |
| DCMTK through 3.6.6 does not handle memory free properly. The program malloc a heap memory for parsing data, but does not free it when error in parsing. Sending specific requests to the dcmqrdb program incur the memory leak. An attacker can use it to launch a DoS attack. | |||||
| CVE-2021-41690 | 1 Offis | 1 Dcmtk | 2022-07-06 | 5.0 MEDIUM | 7.5 HIGH |
| DCMTK through 3.6.6 does not handle memory free properly. The malloced memory for storing all file information are recorded in a global variable LST and are not freed properly. Sending specific requests to the dcmqrdb program can incur a memory leak. An attacker can use it to launch a DoS attack. | |||||
| CVE-2022-20785 | 4 Cisco, Clamav, Debian and 1 more | 4 Secure Endpoint, Clamav, Debian Linux and 1 more | 2022-07-01 | 7.8 HIGH | 7.5 HIGH |
| On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in HTML file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available. | |||||
| CVE-2021-41490 | 1 Rice | 1 Open Motion Planning Library | 2022-06-27 | 5.0 MEDIUM | 7.5 HIGH |
| Memory leaks in LazyPRM.cpp of OMPL v1.5.0 can cause unexpected behavior. | |||||
| CVE-2021-40633 | 1 Giflib Project | 1 Giflib | 2022-06-23 | 5.1 MEDIUM | 8.8 HIGH |
| A memory leak (out-of-memory) in gif2rgb in util/gif2rgb.c in giflib 5.1.4 allows remote attackers trigger an out of memory exception or denial of service via a gif format file. | |||||
| CVE-2021-35078 | 1 Qualcomm | 214 Aqt1000, Aqt1000 Firmware, Ar8035 and 211 more | 2022-06-22 | 7.8 HIGH | 7.5 HIGH |
| Possible memory leak due to improper validation of certificate chain length while parsing server certificate chain in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables | |||||