Total
2926 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-14000 | 1 Ctekproducts | 4 Skyrouter Z4200, Skyrouter Z4200 Firmware, Skyrouter Z4400 and 1 more | 2019-10-09 | 7.5 HIGH | 9.4 CRITICAL |
| An Improper Authentication issue was discovered in Ctek SkyRouter Series 4200 and 4400, all versions prior to V6.00.11. By accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the application without authenticating. | |||||
| CVE-2017-12251 | 1 Cisco | 1 Cloud Services Platform 2100 | 2019-10-09 | 6.5 MEDIUM | 9.9 CRITICAL |
| A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690. | |||||
| CVE-2017-11428 | 1 Onelogin | 1 Ruby-saml | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| OneLogin Ruby-SAML 1.6.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers. | |||||
| CVE-2017-12236 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008. | |||||
| CVE-2017-12229 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. | |||||
| CVE-2017-12337 | 1 Cisco | 11 Emergency Responder, Finesse, Hosted Collaboration Solution and 8 more | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797. | |||||
| CVE-2017-12281 | 1 Cisco | 12 Aironet 1800 Firmware, Aironet 1830e, Aironet 1830i and 9 more | 2019-10-09 | 5.4 MEDIUM | 7.5 HIGH |
| A vulnerability in the implementation of Protected Extensible Authentication Protocol (PEAP) functionality for standalone configurations of Cisco Aironet 1800, 2800, and 3800 Series Access Points could allow an unauthenticated, adjacent attacker to bypass authentication and connect to an affected device. The vulnerability exists because the affected device uses an incorrect default configuration setting of fail open when running in standalone mode. An attacker could exploit this vulnerability by attempting to connect to an affected device. A successful exploit could allow the attacker to bypass authentication and connect to the affected device. This vulnerability affects Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running a vulnerable software release and use WLAN configuration settings that include FlexConnect local switching and central authentication with MAC filtering. Cisco Bug IDs: CSCvd46314. | |||||
| CVE-2017-11427 | 1 Onelogin | 1 Pythonsaml | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| OneLogin PythonSAML 2.3.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers. | |||||
| CVE-2017-11429 | 1 Clever | 1 Saml2-js | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| Clever saml2-js 2.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers. | |||||
| CVE-2017-12213 | 1 Cisco | 2 Catalyst 4000, Ios Xe | 2019-10-09 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. | |||||
| CVE-2017-11430 | 1 Omnitauth-saml Project | 1 Omnitauth-saml | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| OmniAuth OmnitAuth-SAML 1.9.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers. | |||||
| CVE-2017-0910 | 1 Zulip | 1 Zulip Server | 2019-10-09 | 4.0 MEDIUM | 8.8 HIGH |
| In Zulip Server before 1.7.1, on a server with multiple realms, a vulnerability in the invitation system lets an authorized user of one realm on the server create a user account on any other realm. | |||||
| CVE-2017-0911 | 1 Twitter | 1 Twitter Kit | 2019-10-09 | 5.5 MEDIUM | 5.4 MEDIUM |
| Twitter Kit for iOS versions 3.0 to 3.2.1 is vulnerable to a callback verification flaw in the "Login with Twitter" component allowing an attacker to provide alternate credentials. In the final step of "Login with Twitter" authentication information is passed back to the application using the registered custom URL scheme (typically twitterkit-<consumer-key>) on iOS. Because the callback handler did not verify the authenticity of the response, this step is vulnerable to forgery, potentially allowing attacker to associate a Twitter account with a third-party service. | |||||
| CVE-2017-11151 | 1 Synology | 1 Photo Station | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| A vulnerability in synotheme_upload.php in Synology Photo Station before 6.7.3-3432 and 6.3-2967 allows remote attackers to upload arbitrary files without authentication via the logo_upload action. | |||||
| CVE-2017-10623 | 1 Juniper | 1 Junos Space | 2019-10-09 | 6.8 MEDIUM | 8.1 HIGH |
| Lack of authentication and authorization of cluster messages in Juniper Networks Junos Space may allow a man-in-the-middle type of attacker to intercept, inject or disrupt Junos Space cluster operations between two nodes. Affected releases are Juniper Networks Junos Space all versions prior to 17.1R1. | |||||
| CVE-2017-10601 | 1 Juniper | 1 Junos | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2. | |||||
| CVE-2017-10622 | 1 Juniper | 1 Junos Space | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| An authentication bypass vulnerability in Juniper Networks Junos Space Network Management Platform may allow a remote unauthenticated network based attacker to login as any privileged user. This issue only affects Junos Space Network Management Platform 17.1R1 without Patch v1 and 16.1 releases prior to 16.1R3. This issue was found by an external security researcher. | |||||
| CVE-2016-9497 | 1 Hughes | 8 Dw7000, Dw7000 Firmware, Hn7000s and 5 more | 2019-10-09 | 8.3 HIGH | 8.8 HIGH |
| Hughes high-performance broadband satellite modems, models HN7740S DW7000 HN7000S/SM, is vulnerable to an authentication bypass using an alternate path or channel. By default, port 1953 is accessible via telnet and does not require authentication. An unauthenticated remote user can access many administrative commands via this interface, including rebooting the modem. | |||||
| CVE-2016-9463 | 2 Nextcloud, Owncloud | 2 Nextcloud Server, Owncloud | 2019-10-09 | 6.8 MEDIUM | 8.1 HIGH |
| Nextcloud Server before 9.0.54 and 10.0.1 & ownCloud Server before 9.1.2, 9.0.6, and 8.2.9 suffer from SMB User Authentication Bypass. Nextcloud/ownCloud include an optional and not by default enabled SMB authentication component that allows authenticating users against an SMB server. This backend is implemented in a way that tries to connect to a SMB server and if that succeeded consider the user logged-in. The backend did not properly take into account SMB servers that have any kind of anonymous auth configured. This is the default on SMB servers nowadays and allows an unauthenticated attacker to gain access to an account without valid credentials. Note: The SMB backend is disabled by default and requires manual configuration in the Nextcloud/ownCloud config file. If you have not configured the SMB backend then you're not affected by this vulnerability. | |||||
| CVE-2016-9124 | 1 Revive-adserver | 1 Revive Adserver | 2019-10-09 | 5.0 MEDIUM | 9.8 CRITICAL |
| Revive Adserver before 3.2.3 suffers from Improper Restriction of Excessive Authentication Attempts. The login page of Revive Adserver is vulnerable to password-guessing attacks. An account lockdown feature was considered, but rejected to avoid introducing service disruptions to regular users during such attacks. A random delay has instead been introduced as a countermeasure in case of password failures, along with a system to discourage parallel brute forcing. These systems will effectively allow the valid users to log in to the adserver, even while an attack is in progress. | |||||